Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1328128 > unrolled thread
| Started by | "Andrew F. Davis" <afd@ti.com> |
|---|---|
| First post | 2016-02-06 00:20 +0100 |
| Last post | 2016-02-07 17:50 +0100 |
| Articles | 3 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs "Andrew F. Davis" <afd@ti.com> - 2016-02-06 00:20 +0100
Re: [PATCH] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs Florian Fainelli <f.fainelli@gmail.com> - 2016-02-06 22:30 +0100
Re: [PATCH] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs "Andrew F. Davis" <afd@ti.com> - 2016-02-07 17:50 +0100
| From | "Andrew F. Davis" <afd@ti.com> |
|---|---|
| Date | 2016-02-06 00:20 +0100 |
| Subject | [PATCH] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs |
| Message-ID | <qYXPs-6RV-23@gated-at.bofh.it> |
The TI TLK10x Ethernet PHYs are similar in the interrupt relevant
registers and so are compatible with the DP83848x devices already
supported. Add these and re-order code to support additional PHYs.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
drivers/net/phy/dp83848.c | 89 ++++++++++++++++++++++++++++-------------------
1 file changed, 53 insertions(+), 36 deletions(-)
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 5e14e62..bc88259 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -1,7 +1,8 @@
/*
* Driver for the Texas Instruments DP83848 PHY
*
- * Copyright (C) 2015 Texas Instruments Inc.
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Andrew F. Davis <afd@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -16,11 +17,13 @@
#include <linux/module.h>
#include <linux/phy.h>
-#define DP83848_PHY_ID 0x20005c90
+#define DP83848C_PHY_ID 0x20005c90
+#define DP83848I_PHY_ID 0x20005ca0
+#define TLK10X_PHY_ID 0x2000a210
/* Registers */
-#define DP83848_MICR 0x11
-#define DP83848_MISR 0x12
+#define DP83848_MICR 0x11 /* MII Interrupt Control Register */
+#define DP83848_MISR 0x12 /* MII Interrupt Status Register */
/* MICR Register Fields */
#define DP83848_MICR_INT_OE BIT(0) /* Interrupt Output Enable */
@@ -36,6 +39,12 @@
#define DP83848_MISR_ED_INT_EN BIT(6) /* Energy detect */
#define DP83848_MISR_LQM_INT_EN BIT(7) /* Link Quality Monitor */
+#define DP83848_INT_EN_MASK \
+ (DP83848_MISR_ANC_INT_EN | \
+ DP83848_MISR_DUP_INT_EN | \
+ DP83848_MISR_SPD_INT_EN | \
+ DP83848_MISR_LINK_INT_EN)
+
static int dp83848_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, DP83848_MISR);
@@ -45,50 +54,58 @@ static int dp83848_ack_interrupt(struct phy_device *phydev)
static int dp83848_config_intr(struct phy_device *phydev)
{
- int err;
+ int control, ret;
+
+ control = phy_read(phydev, DP83848_MICR);
+ if (control < 0)
+ return control;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
- err = phy_write(phydev, DP83848_MICR,
- DP83848_MICR_INT_OE |
- DP83848_MICR_INTEN);
- if (err < 0)
- return err;
-
- return phy_write(phydev, DP83848_MISR,
- DP83848_MISR_ANC_INT_EN |
- DP83848_MISR_DUP_INT_EN |
- DP83848_MISR_SPD_INT_EN |
- DP83848_MISR_LINK_INT_EN);
+ control |= DP83848_MICR_INT_OE;
+ control |= DP83848_MICR_INTEN;
+
+ ret = phy_write(phydev, DP83848_MISR, DP83848_INT_EN_MASK);
+ if (ret < 0)
+ return ret;
+ } else {
+ control &= ~DP83848_MICR_INTEN;
}
- return phy_write(phydev, DP83848_MICR, 0x0);
+ return phy_write(phydev, DP83848_MICR, control);
}
static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
- { DP83848_PHY_ID, 0xfffffff0 },
+ { DP83848C_PHY_ID, 0xfffffff0 },
+ { DP83848I_PHY_ID, 0xfffffff0 },
+ { TLK10X_PHY_ID, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
+#define DP83848_PHY_DRIVER(_id, _name) \
+ { \
+ .phy_id = _id, \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_BASIC_FEATURES, \
+ .flags = PHY_HAS_INTERRUPT, \
+ \
+ .soft_reset = genphy_soft_reset, \
+ .config_init = genphy_config_init, \
+ .suspend = genphy_suspend, \
+ .resume = genphy_resume, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ \
+ /* IRQ related */ \
+ .ack_interrupt = dp83848_ack_interrupt, \
+ .config_intr = dp83848_config_intr, \
+ }
+
static struct phy_driver dp83848_driver[] = {
- {
- .phy_id = DP83848_PHY_ID,
- .phy_id_mask = 0xfffffff0,
- .name = "TI DP83848",
- .features = PHY_BASIC_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
-
- .soft_reset = genphy_soft_reset,
- .config_init = genphy_config_init,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
-
- /* IRQ related */
- .ack_interrupt = dp83848_ack_interrupt,
- .config_intr = dp83848_config_intr,
- },
+ DP83848_PHY_DRIVER(DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY"),
+ DP83848_PHY_DRIVER(DP83848I_PHY_ID, "TI DP83848I 10/100 Mbps PHY"),
+ DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY"),
};
module_phy_driver(dp83848_driver);
--
2.7.0
[toc] | [next] | [standalone]
| From | Florian Fainelli <f.fainelli@gmail.com> |
|---|---|
| Date | 2016-02-06 22:30 +0100 |
| Subject | Re: [PATCH] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs |
| Message-ID | <qZiAy-4L6-5@gated-at.bofh.it> |
| In reply to | #1328128 |
Le 05/02/2016 15:13, Andrew F. Davis a écrit : > The TI TLK10x Ethernet PHYs are similar in the interrupt relevant > registers and so are compatible with the DP83848x devices already > supported. Add these and re-order code to support additional PHYs. This looks fine, but this could also be broken down into 3 commits: - one which adds the macro to add new PHY entries - one which renames DP83848_PHY_ID to DP83848C_PHY_ID - one which factors out the interrupt enable mask > > Signed-off-by: Andrew F. Davis <afd@ti.com> > --- > drivers/net/phy/dp83848.c | 89 ++++++++++++++++++++++++++++------------------- > 1 file changed, 53 insertions(+), 36 deletions(-) > > diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c > index 5e14e62..bc88259 100644 > --- a/drivers/net/phy/dp83848.c > +++ b/drivers/net/phy/dp83848.c > @@ -1,7 +1,8 @@ > /* > * Driver for the Texas Instruments DP83848 PHY > * > - * Copyright (C) 2015 Texas Instruments Inc. > + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ > + * Andrew F. Davis <afd@ti.com> We have the git changelog to know who added changes to the driver, you can drop that specific change and just bump the copyright year.-- -- Florian
[toc] | [prev] | [next] | [standalone]
| From | "Andrew F. Davis" <afd@ti.com> |
|---|---|
| Date | 2016-02-07 17:50 +0100 |
| Subject | Re: [PATCH] net: phy: dp83848: Add support for TI TLK10x Ethernet PHYs |
| Message-ID | <qZAH8-l6-15@gated-at.bofh.it> |
| In reply to | #1328375 |
On 02/06/2016 03:25 PM, Florian Fainelli wrote: > Le 05/02/2016 15:13, Andrew F. Davis a écrit : >> The TI TLK10x Ethernet PHYs are similar in the interrupt relevant >> registers and so are compatible with the DP83848x devices already >> supported. Add these and re-order code to support additional PHYs. > > This looks fine, but this could also be broken down into 3 commits: > > - one which adds the macro to add new PHY entries > - one which renames DP83848_PHY_ID to DP83848C_PHY_ID > - one which factors out the interrupt enable mask > No problem, will do. >> >> Signed-off-by: Andrew F. Davis <afd@ti.com> >> --- >> drivers/net/phy/dp83848.c | 89 ++++++++++++++++++++++++++++------------------- >> 1 file changed, 53 insertions(+), 36 deletions(-) >> >> diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c >> index 5e14e62..bc88259 100644 >> --- a/drivers/net/phy/dp83848.c >> +++ b/drivers/net/phy/dp83848.c >> @@ -1,7 +1,8 @@ >> /* >> * Driver for the Texas Instruments DP83848 PHY >> * >> - * Copyright (C) 2015 Texas Instruments Inc. >> + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ >> + * Andrew F. Davis <afd@ti.com> > > We have the git changelog to know who added changes to the driver, you > can drop that specific change and just bump the copyright year. I was the original author and forgot to add this, just like the consistency with other drivers with named authors, but not a big deal so I can drop that. Andrew > -- > Florian >
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web