Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1311953 > unrolled thread
| Started by | Chen Feng <puck.chen@hisilicon.com> |
|---|---|
| First post | 2016-01-19 07:40 +0100 |
| Last post | 2016-01-21 11:20 +0100 |
| Articles | 9 — 3 participants |
Back to article view | Back to linux.kernel
[PATCH v6 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Chen Feng <puck.chen@hisilicon.com> - 2016-01-19 07:40 +0100
[PATCH v6 3/5] mfd: hi655x: Add hi665x pmic driver Chen Feng <puck.chen@hisilicon.com> - 2016-01-19 07:40 +0100
[PATCH v6 2/5] doc: bindings: Document for hi655x regulator driver Chen Feng <puck.chen@hisilicon.com> - 2016-01-19 07:40 +0100
[PATCH v6 1/5] doc: bindings: Add document for mfd hi665x PMIC Chen Feng <puck.chen@hisilicon.com> - 2016-01-19 07:40 +0100
[PATCH v6 4/5] regulator: add regulator driver of hi655x pmic Chen Feng <puck.chen@hisilicon.com> - 2016-01-19 07:40 +0100
Re: [PATCH v6 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Mark Brown <broonie@kernel.org> - 2016-01-19 18:40 +0100
Re: [PATCH v6 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core chenfeng <puck.chen@hisilicon.com> - 2016-01-20 05:00 +0100
Re: [PATCH v6 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core Mark Brown <broonie@kernel.org> - 2016-01-20 12:50 +0100
Re: [PATCH v6 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core chenfeng <puck.chen@hisilicon.com> - 2016-01-21 11:20 +0100
| From | Chen Feng <puck.chen@hisilicon.com> |
|---|---|
| Date | 2016-01-19 07:40 +0100 |
| Subject | [PATCH v6 0/5] Add Support for Hi6220 PMIC Hi6553 MFD Core |
| Message-ID | <qSy7n-3RB-3@gated-at.bofh.it> |
The patch sets add support for Hi6220 PMIC Hi655x MFD core and its regulator driver. Current testing and support board is Hikey which is one of 96boards. It is an arm64 open source board. For more information about this board, please access https://www.96boards.org. This is hardware layout for access PMIC Hi655x from AP SoC Hi6220. Between PMIC Hi655x and Hi6220, the physical signal channel is SSI. We can use memory-mapped I/O to communicate. +----------------+ +-------------+ | | | | | Hi6220 | SSI bus | Hi655x | | |-------------| | | |(REGMAP_MMIO)| | +----------------+ +-------------+ V2: Code refactoring of regulator. V3: Drop mtcmos from this patch and use regmap-irq. V4: Move the vset-table to driver code and donot open code for it. V6: Use regulators_node and of_match, donot open code fot it. Chen Feng (5): doc: bindings: Add document for mfd hi665x PMIC doc: bindings: Document for hi655x regulator driver mfd: hi655x: Add hi665x pmic driver regulator: add regulator driver of hi655x pmic hisilicon/dts: Add hi655x pmic dts node .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 28 +++ .../regulator/hisilicon,hi655x-regulator.txt | 28 +++ arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 5 + arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 87 ++++++++ drivers/mfd/Kconfig | 10 + drivers/mfd/Makefile | 1 + drivers/mfd/hi655x-pmic.c | 170 +++++++++++++++ drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/hi655x-regulator.c | 227 +++++++++++++++++++++ include/linux/mfd/hi655x-pmic.h | 56 +++++ 11 files changed, 621 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt create mode 100644 drivers/mfd/hi655x-pmic.c create mode 100644 drivers/regulator/hi655x-regulator.c create mode 100644 include/linux/mfd/hi655x-pmic.h -- 1.9.1
[toc] | [next] | [standalone]
| From | Chen Feng <puck.chen@hisilicon.com> |
|---|---|
| Date | 2016-01-19 07:40 +0100 |
| Subject | [PATCH v6 3/5] mfd: hi655x: Add hi665x pmic driver |
| Message-ID | <qSy7n-3RB-5@gated-at.bofh.it> |
| In reply to | #1311953 |
Add pmic mfd driver to support hisilicon hi665x.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
---
drivers/mfd/Kconfig | 10 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/hi655x-pmic.c | 170 ++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/hi655x-pmic.h | 56 +++++++++++++
4 files changed, 237 insertions(+)
create mode 100644 drivers/mfd/hi655x-pmic.c
create mode 100644 include/linux/mfd/hi655x-pmic.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4d92df6..0c84186 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -284,6 +284,16 @@ config MFD_HI6421_PMIC
menus in order to enable them.
We communicate with the Hi6421 via memory-mapped I/O.
+config MFD_HI655X_PMIC
+ tristate "HiSilicon Hi655X series PMU/Codec IC"
+ depends on ARCH_HISI || COMPILE_TEST
+ depends on OF
+ select MFD_CORE
+ select REGMAP_MMIO
+ select REGMAP_IRQ
+ help
+ Select this option to enable Hisilicon hi655x series pmic driver.
+
config HTC_EGPIO
bool "HTC EGPIO support"
depends on GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a8b76b8..6a7b0e1 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -186,6 +186,7 @@ obj-$(CONFIG_MFD_STW481X) += stw481x.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
obj-$(CONFIG_MFD_SKY81452) += sky81452.o
diff --git a/drivers/mfd/hi655x-pmic.c b/drivers/mfd/hi655x-pmic.c
new file mode 100644
index 0000000..68c33a8
--- /dev/null
+++ b/drivers/mfd/hi655x-pmic.c
@@ -0,0 +1,170 @@
+/*
+ * Device driver for regulators in hi655x IC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Chen Feng <puck.chen@hisilicon.com>
+ * Fei Wang <w.f@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/hi655x-pmic.h>
+#include <linux/regmap.h>
+
+static const struct mfd_cell hi655x_pmic_devs[] = {
+ { .name = "hi655x-regulator", },
+};
+
+static const struct regmap_irq hi655x_irqs[] = {
+ { .reg_offset = 0, .mask = OTMP_D1R_INT },
+ { .reg_offset = 0, .mask = VSYS_2P5_R_INT },
+ { .reg_offset = 0, .mask = VSYS_UV_D3R_INT },
+ { .reg_offset = 0, .mask = VSYS_6P0_D200UR_INT },
+ { .reg_offset = 0, .mask = PWRON_D4SR_INT },
+ { .reg_offset = 0, .mask = PWRON_D20F_INT },
+ { .reg_offset = 0, .mask = PWRON_D20R_INT },
+ { .reg_offset = 0, .mask = RESERVE_INT },
+};
+
+static const struct regmap_irq_chip hi655x_irq_chip = {
+ .name = "hi655x-pmic",
+ .irqs = hi655x_irqs,
+ .num_regs = 1,
+ .num_irqs = ARRAY_SIZE(hi655x_irqs),
+ .status_base = HI655X_IRQ_STAT_BASE,
+ .mask_base = HI655X_IRQ_MASK_BASE,
+};
+
+static unsigned int hi655x_pmic_get_version(struct hi655x_pmic *pmic)
+{
+ u32 val;
+
+ regmap_read(pmic->regmap,
+ HI655X_BUS_ADDR(HI655X_VER_REG), &val);
+
+ return val;
+}
+
+static struct regmap_config hi655x_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = HI655X_STRIDE,
+ .val_bits = 8,
+ .max_register = HI655X_BUS_ADDR(0xFFF),
+};
+
+static void hi655x_local_irq_clear(struct regmap *map)
+{
+ int i;
+
+ regmap_write(map, HI655X_ANA_IRQM_BASE, HI655X_IRQ_CLR);
+ for (i = 0; i < HI655X_IRQ_ARRAY; i++) {
+ regmap_write(map, HI655X_IRQ_STAT_BASE + i * HI655X_STRIDE,
+ HI655X_IRQ_CLR);
+ }
+}
+
+static int hi655x_pmic_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct hi655x_pmic *pmic;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ void __iomem *base;
+
+ pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+ pmic->dev = dev;
+
+ pmic->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!pmic->res) {
+ dev_err(dev, "platform_get_resource err\n");
+ return -ENOENT;
+ }
+ base = devm_ioremap_resource(dev, pmic->res);
+ if (!base) {
+ dev_err(dev, "cannot map register memory\n");
+ return -ENOMEM;
+ }
+ pmic->regmap = devm_regmap_init_mmio_clk(dev, NULL, base,
+ &hi655x_regmap_config);
+
+ pmic->ver = hi655x_pmic_get_version(pmic);
+ if ((pmic->ver < PMU_VER_START) || (pmic->ver > PMU_VER_END)) {
+ dev_warn(dev, "it is wrong pmu version\n");
+ return -EINVAL;
+ }
+
+ hi655x_local_irq_clear(pmic->regmap);
+
+ pmic->gpio = of_get_named_gpio(np, "pmic-gpios", 0);
+ if (!gpio_is_valid(pmic->gpio)) {
+ dev_err(dev, "cannot get the pmic-gpios\n");
+ return -ENODEV;
+ }
+
+ ret = devm_gpio_request_one(dev, pmic->gpio, GPIOF_IN,
+ "hi655x_pmic_irq");
+ if (ret < 0) {
+ dev_err(dev, "failed to request gpio %d ret = %d\n",
+ pmic->gpio, ret);
+ return ret;
+ }
+
+ ret = regmap_add_irq_chip(pmic->regmap, gpio_to_irq(pmic->gpio),
+ IRQF_TRIGGER_LOW | IRQF_NO_SUSPEND, 0,
+ &hi655x_irq_chip, &pmic->irq_data);
+ if (ret) {
+ dev_err(dev, "add pmic irq chip error! ret %d\n", ret);
+ return ret;
+ }
+
+ /* bind pmic to device */
+ platform_set_drvdata(pdev, pmic);
+
+ ret = mfd_add_devices(dev, 0, hi655x_pmic_devs,
+ ARRAY_SIZE(hi655x_pmic_devs), NULL, 0, NULL);
+ if (ret) {
+ dev_err(dev, "add mfd devices failed: %d\n", ret);
+ regmap_del_irq_chip(pmic->irq, pmic->irq_data);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int hi655x_pmic_remove(struct platform_device *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id of_hi655x_pmic_match_tbl[] = {
+ { .compatible = "hisilicon,hi655x-pmic", },
+ {},
+};
+
+static struct platform_driver hi655x_pmic_driver = {
+ .driver = {
+ .name = "hi655x-pmic",
+ .of_match_table = of_hi655x_pmic_match_tbl,
+ },
+ .probe = hi655x_pmic_probe,
+ .remove = hi655x_pmic_remove,
+};
+module_platform_driver(hi655x_pmic_driver);
+
+MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>");
+MODULE_DESCRIPTION("Hisilicon hi655x pmic driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/hi655x-pmic.h b/include/linux/mfd/hi655x-pmic.h
new file mode 100644
index 0000000..e1af0a1
--- /dev/null
+++ b/include/linux/mfd/hi655x-pmic.h
@@ -0,0 +1,56 @@
+/*
+ * Device driver for regulators in hi655x IC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Chen Feng <puck.chen@hisilicon.com>
+ * Fei Wang <w.f@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __HI655X_PMIC_H
+#define __HI655X_PMIC_H
+
+/* Hi655x registers are mapped to memory bus in 4 bytes stride */
+#define HI655X_STRIDE (4)
+#define HI655X_BUS_ADDR(x) ((x) << 2)
+
+#define HI655X_BITS (8)
+
+#define HI655X_NR_IRQ (32)
+
+#define HI655X_IRQ_STAT_BASE (0x003 << 2)
+#define HI655X_IRQ_MASK_BASE (0x007 << 2)
+#define HI655X_ANA_IRQM_BASE (0x1b5 << 2)
+#define HI655X_IRQ_ARRAY (4)
+#define HI655X_IRQ_MASK (0xFF)
+#define HI655X_IRQ_CLR (0xFF)
+#define HI655X_VER_REG (0x00)
+
+#define PMU_VER_START (0x10)
+#define PMU_VER_END (0x38)
+
+#define RESERVE_INT (BIT(7))
+#define PWRON_D20R_INT (BIT(6))
+#define PWRON_D20F_INT (BIT(5))
+#define PWRON_D4SR_INT (BIT(4))
+#define VSYS_6P0_D200UR_INT (BIT(3))
+#define VSYS_UV_D3R_INT (BIT(2))
+#define VSYS_2P5_R_INT (BIT(1))
+#define OTMP_D1R_INT (BIT(0))
+
+struct hi655x_pmic {
+ struct resource *res;
+ struct device *dev;
+ struct regmap *regmap;
+ struct clk *clk;
+ int irq;
+ int gpio;
+ unsigned int ver;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+#endif
--
1.9.1
[toc] | [prev] | [next] | [standalone]
| From | Chen Feng <puck.chen@hisilicon.com> |
|---|---|
| Date | 2016-01-19 07:40 +0100 |
| Subject | [PATCH v6 2/5] doc: bindings: Document for hi655x regulator driver |
| Message-ID | <qSy7n-3RB-9@gated-at.bofh.it> |
| In reply to | #1311953 |
Add Document for hi655x pmic regulator driver
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
---
.../regulator/hisilicon,hi655x-regulator.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
new file mode 100644
index 0000000..c94c1a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/hisilicon,hi655x-regulator.txt
@@ -0,0 +1,28 @@
+Hisilicon Hi655x Voltage regulators
+
+Note:
+The hi655x regulator control is managed by hi655x Power IC.
+So the node of this regulator must be child node of hi655x
+pmic node.
+
+The driver uses the regulator core framework, so please also
+take the bindings of regulator.txt for reference.
+
+The valid names for regulators are:
+
+ldo2 ldo7 ldo10 ldo13 ldo14 ldo15 ldo17 ldo19 ldo21 ldo22
+
+Example:
+ pmic: pmic@f8000000 {
+ compatible = "hisilicon,hi655x-pmic";
+ ...
+ regulators {
+ ldo2: ldo2@a21 {
+ regulator-compatible = "LDO2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+ ...
+ }
+ }
--
1.9.1
[toc] | [prev] | [next] | [standalone]
| From | Chen Feng <puck.chen@hisilicon.com> |
|---|---|
| Date | 2016-01-19 07:40 +0100 |
| Subject | [PATCH v6 1/5] doc: bindings: Add document for mfd hi665x PMIC |
| Message-ID | <qSy7n-3RB-11@gated-at.bofh.it> |
| In reply to | #1311953 |
Add document for mfd driver hi655x pmic driver
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
---
.../devicetree/bindings/mfd/hisilicon,hi655x.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
new file mode 100644
index 0000000..3180c40
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
@@ -0,0 +1,28 @@
+Hisilicon hi655x Power Management Integrated Circuit (PMIC)
+
+The hardware layout for access PMIC Hi655x from AP SoC Hi6220.
+Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.
+We can use memory-mapped I/O to communicate.
+
++----------------+ +-------------+
+| | | |
+| Hi6220 | SSI bus | Hi655x |
+| |-------------| |
+| |(REGMAP_MMIO)| |
++----------------+ +-------------+
+
+Required properties:
+- compatible: Should be "hisilicon,hi655x-pmic"
+- reg: Base address of PMIC on hi6220 soc
+- interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
+- pmic-gpios: The gpio used by pmic irq.
+
+Example:
+ pmic: pmic@f8000000 {
+ compatible = "hisilicon,hi655x-pmic";
+ reg = <0x0 0xf8000000 0x0 0x1000>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ pmic-gpios = <&gpio1 2 0>;
+ status = "disabled";
+ }
--
1.9.1
[toc] | [prev] | [next] | [standalone]
| From | Chen Feng <puck.chen@hisilicon.com> |
|---|---|
| Date | 2016-01-19 07:40 +0100 |
| Subject | [PATCH v6 4/5] regulator: add regulator driver of hi655x pmic |
| Message-ID | <qSy7o-3RB-17@gated-at.bofh.it> |
| In reply to | #1311953 |
Add regulator support for hi655x pmic
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
---
drivers/regulator/Kconfig | 8 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/hi655x-regulator.c | 227 +++++++++++++++++++++++++++++++++++
3 files changed, 236 insertions(+)
create mode 100644 drivers/regulator/hi655x-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8df0b0e..2e9eaa7 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -261,6 +261,14 @@ config REGULATOR_HI6421
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
of them come with support to either ECO (idle) or sleep mode.
+config REGULATOR_HI655X
+ tristate "Hisilicon HI655X PMIC regulators support"
+ depends on ARCH_HISI || COMPILE_TEST
+ depends on MFD_HI655X_PMIC && OF
+ help
+ This driver provides support for the voltage regulators of the
+ Hisilicon Hi655x PMIC device.
+
config REGULATOR_ISL9305
tristate "Intersil ISL9305 regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 0f81749..8e4db96 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
diff --git a/drivers/regulator/hi655x-regulator.c b/drivers/regulator/hi655x-regulator.c
new file mode 100644
index 0000000..95f2048
--- /dev/null
+++ b/drivers/regulator/hi655x-regulator.c
@@ -0,0 +1,227 @@
+/*
+ * Device driver for regulators in hi655x IC
+ *
+ * Copyright (c) 2016 Hisilicon.
+ *
+ * Chen Feng <puck.chen@hisilicon.com>
+ * Fei Wang <w.f@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/hi655x-pmic.h>
+
+struct hi655x_regulator {
+ unsigned int disable_reg;
+ unsigned int status_reg;
+ unsigned int ctrl_regs;
+ unsigned int ctrl_mask;
+ struct regulator_desc rdesc;
+};
+
+/* LDO7 & LDO10 */
+static const unsigned int ldo7_voltages[] = {
+ 1800000, 1850000, 2850000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
+};
+
+static const unsigned int ldo19_voltages[] = {
+ 1800000, 1850000, 1900000, 1750000,
+ 2800000, 2850000, 2900000, 3000000,
+};
+
+static const unsigned int ldo22_voltages[] = {
+ 900000, 1000000, 1050000, 1100000,
+ 1150000, 1175000, 1185000, 1200000,
+};
+
+enum hi655x_regulator_id {
+ HI655X_LDO0,
+ HI655X_LDO1,
+ HI655X_LDO2,
+ HI655X_LDO3,
+ HI655X_LDO4,
+ HI655X_LDO5,
+ HI655X_LDO6,
+ HI655X_LDO7,
+ HI655X_LDO8,
+ HI655X_LDO9,
+ HI655X_LDO10,
+ HI655X_LDO11,
+ HI655X_LDO12,
+ HI655X_LDO13,
+ HI655X_LDO14,
+ HI655X_LDO15,
+ HI655X_LDO16,
+ HI655X_LDO17,
+ HI655X_LDO18,
+ HI655X_LDO19,
+ HI655X_LDO20,
+ HI655X_LDO21,
+ HI655X_LDO22,
+};
+
+static int hi655x_is_enabled(struct regulator_dev *rdev)
+{
+ unsigned int value = 0;
+
+ struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
+
+ regmap_read(rdev->regmap, regulator->status_reg, &value);
+ return (value & BIT(regulator->ctrl_mask));
+}
+
+static int hi655x_disable(struct regulator_dev *rdev)
+{
+ int ret = 0;
+
+ struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
+
+ ret = regmap_write(rdev->regmap, regulator->disable_reg,
+ BIT(regulator->ctrl_mask));
+ return ret;
+}
+
+static struct regulator_ops hi655x_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = hi655x_disable,
+ .is_enabled = hi655x_is_enabled,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static struct regulator_ops hi655x_ldo_linear_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = hi655x_disable,
+ .is_enabled = hi655x_is_enabled,
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+#define HI655X_LDO(_ID, vreg, vmask, ereg, dreg, \
+ sreg, cmask, vtable) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .ops = &hi655x_regulator_ops, \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI655X_##_ID, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(vtable), \
+ .volt_table = vtable, \
+ .vsel_reg = HI655X_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI655X_BUS_ADDR(ereg), \
+ .enable_mask = cmask, \
+ }, \
+ .disable_reg = HI655X_BUS_ADDR(dreg), \
+ .status_reg = HI655X_BUS_ADDR(sreg), \
+ .ctrl_mask = cmask, \
+}
+
+#define HI655X_LDO_LINEAR(_ID, vreg, vmask, ereg, dreg, \
+ sreg, cmask, minv, nvolt, vstep) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .ops = &hi655x_ldo_linear_ops, \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI655X_##_ID, \
+ .owner = THIS_MODULE, \
+ .min_uV = minv, \
+ .n_voltages = nvolt, \
+ .uV_step = vstep, \
+ .uV_step = vstep, \
+ .vsel_reg = HI655X_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI655X_BUS_ADDR(ereg), \
+ .enable_mask = cmask, \
+ }, \
+ .disable_reg = HI655X_BUS_ADDR(dreg), \
+ .status_reg = HI655X_BUS_ADDR(sreg), \
+ .ctrl_mask = cmask, \
+}
+
+static struct hi655x_regulator regulators[] = {
+ HI655X_LDO_LINEAR(LDO2, 0x72, 0x07, 0x29, 0x2a, 0x2b, 0x01,
+ 2500000, 8, 100000),
+ HI655X_LDO(LDO7, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x06, ldo7_voltages),
+ HI655X_LDO(LDO10, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x01, ldo7_voltages),
+ HI655X_LDO_LINEAR(LDO13, 0x7e, 0x07, 0x2c, 0x2d, 0x2e, 0x04,
+ 1600000, 8, 50000),
+ HI655X_LDO_LINEAR(LDO14, 0x7f, 0x07, 0x2c, 0x2d, 0x2e, 0x05,
+ 2500000, 8, 100000),
+ HI655X_LDO_LINEAR(LDO15, 0x80, 0x07, 0x2c, 0x2d, 0x2e, 0x06,
+ 1600000, 8, 50000),
+ HI655X_LDO_LINEAR(LDO17, 0x82, 0x07, 0x2f, 0x30, 0x31, 0x00,
+ 2500000, 8, 100000),
+ HI655X_LDO(LDO19, 0x84, 0x07, 0x2f, 0x30, 0x31, 0x02, ldo19_voltages),
+ HI655X_LDO_LINEAR(LDO21, 0x86, 0x07, 0x2f, 0x30, 0x31, 0x04,
+ 1650000, 8, 50000),
+ HI655X_LDO(LDO22, 0x87, 0x07, 0x2f, 0x30, 0x31, 0x05, ldo22_voltages),
+};
+
+static int hi655x_regulator_probe(struct platform_device *pdev)
+{
+ unsigned int i;
+ struct hi655x_regulator *regulator;
+ struct hi655x_pmic *pmic;
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ if (!pmic) {
+ dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
+ return -ENODEV;
+ }
+
+ regulator = devm_kzalloc(&pdev->dev, sizeof(*regulator), GFP_KERNEL);
+ if (!regulator)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, regulator);
+
+ config.dev = pdev->dev.parent;
+ config.regmap = pmic->regmap;
+ config.driver_data = regulator;
+ for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+ rdev = devm_regulator_register(&pdev->dev,
+ ®ulators[i].rdesc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ regulator->rdesc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static struct platform_driver hi655x_regulator_driver = {
+ .driver = {
+ .name = "hi655x-regulator",
+ },
+ .probe = hi655x_regulator_probe,
+};
+module_platform_driver(hi655x_regulator_driver);
+
+MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>");
+MODULE_DESCRIPTION("Hisilicon hi655x regulator driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
[toc] | [prev] | [next] | [standalone]
| From | Mark Brown <broonie@kernel.org> |
|---|---|
| Date | 2016-01-19 18:40 +0100 |
| Message-ID | <qSIq6-2DY-25@gated-at.bofh.it> |
| In reply to | #1311953 |
[Multipart message — attachments visible in raw view] — view raw
On Tue, Jan 19, 2016 at 02:31:59PM +0800, Chen Feng wrote: > Chen Feng (5): > doc: bindings: Add document for mfd hi665x PMIC > doc: bindings: Document for hi655x regulator driver > mfd: hi655x: Add hi665x pmic driver > regulator: add regulator driver of hi655x pmic > hisilicon/dts: Add hi655x pmic dts node I've asked you several times to use subject lines reflecting the style for the subsystem for the DT bindings (and have just noticed that the same thing applies to the DTS update).
[toc] | [prev] | [next] | [standalone]
| From | chenfeng <puck.chen@hisilicon.com> |
|---|---|
| Date | 2016-01-20 05:00 +0100 |
| Message-ID | <qSS65-MK-1@gated-at.bofh.it> |
| In reply to | #1312400 |
On 2016/1/20 1:30, Mark Brown wrote: > On Tue, Jan 19, 2016 at 02:31:59PM +0800, Chen Feng wrote: > >> Chen Feng (5): >> doc: bindings: Add document for mfd hi665x PMIC >> doc: bindings: Document for hi655x regulator driver >> mfd: hi655x: Add hi665x pmic driver >> regulator: add regulator driver of hi655x pmic >> hisilicon/dts: Add hi655x pmic dts node > > I've asked you several times to use subject lines reflecting the style > for the subsystem for the DT bindings (and have just noticed that the > same thing applies to the DTS update). > Mark, Really sorry for this. Since I have not caught what you mean before this time. I changed the style problem from doc:bindings to doc: bindings. A blank space added. But this was not accurately what you mean. I will change it like this: bindings: mfd: hi655x: Add document for mfd hi665x PMIC bindings: regulator: hi655x: Document for hi655x regulator driver regulator: hi655x: add regulator driver of hi655x pmic arm64: dts: hisilicon: Add hi655x pmic dts node Will this be okay? Have you also reviewed the regulator driver code? I changed it to of_match and regulators_node without opening code. Thanks again for your advice. Feng
[toc] | [prev] | [next] | [standalone]
| From | Mark Brown <broonie@kernel.org> |
|---|---|
| Date | 2016-01-20 12:50 +0100 |
| Message-ID | <qSZqW-5Mi-17@gated-at.bofh.it> |
| In reply to | #1312857 |
[Multipart message — attachments visible in raw view] — view raw
On Wed, Jan 20, 2016 at 11:51:27AM +0800, chenfeng wrote:
> I will change it like this:
> bindings: regulator: hi655x: Document for hi655x regulator driver
As we discussed previously I'd expected something more like:
regulator: hi655x: Document for hi655x regulator driver
> arm64: dts: hisilicon: Add hi655x pmic dts node
That's what I'd expect.
> Have you also reviewed the regulator driver code? I changed it to
> of_match and regulators_node without opening code.
Not yet.
[toc] | [prev] | [next] | [standalone]
| From | chenfeng <puck.chen@hisilicon.com> |
|---|---|
| Date | 2016-01-21 11:20 +0100 |
| Message-ID | <qTkvo-3Pq-7@gated-at.bofh.it> |
| In reply to | #1313154 |
On 2016/1/20 19:46, Mark Brown wrote: > On Wed, Jan 20, 2016 at 11:51:27AM +0800, chenfeng wrote: > >> I will change it like this: >> bindings: regulator: hi655x: Document for hi655x regulator driver > > As we discussed previously I'd expected something more like: > > regulator: hi655x: Document for hi655x regulator driver > ok >> arm64: dts: hisilicon: Add hi655x pmic dts node > > That's what I'd expect. > >> Have you also reviewed the regulator driver code? I changed it to >> of_match and regulators_node without opening code. > > Not yet. >
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web