Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1294750 > unrolled thread

[PATCH v5 0/5] Qualcomm PCIe driver and designware fixes

Back to article view | Back to linux.kernel

Contents

  [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes Stanimir Varbanov <stanimir.varbanov@linaro.org> - 2015-12-18 13:40 +0100
    [PATCH v5 5/5] ARM: dts: ifc6410: enable pcie dt node for this board Stanimir Varbanov <stanimir.varbanov@linaro.org> - 2015-12-18 13:40 +0100
    [PATCH v5 4/5] ARM: dts: apq8064: add pcie devicetree node Stanimir Varbanov <stanimir.varbanov@linaro.org> - 2015-12-18 13:50 +0100
    [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver Stanimir Varbanov <stanimir.varbanov@linaro.org> - 2015-12-18 14:00 +0100
      [PATCH] PCI: qcom: fix ptr_ret.cocci warnings kbuild test robot <lkp@intel.com> - 2015-12-18 14:50 +0100
      Re: [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver kbuild test robot <lkp@intel.com> - 2015-12-18 14:50 +0100
        Re: [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver Bjorn Andersson <bjorn@kryo.se> - 2015-12-21 00:20 +0100
          Re: [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver Arnd Bergmann <arnd@arndb.de> - 2015-12-22 00:10 +0100

#1294750 — [PATCH v5 0/5] Qualcomm PCIe driver and designware fixes

Hi,

I'm sending v5 with following changes:
- in 1/5 - replace wmb() call with PCIE_ATU_CR2 register read.
- in 3/5 - addressed comments from Born Helgaas about usage of a
standard PCI capabilities register names and rename link training
function to the way that other Designware based drivers use.
- in 5/5 - addressed a comment from Bjorn Andersson about regulator
label duplication.

Comments are welcome!

The previous v4 of the patch set can be found at [1].

regards,
Stan

[1] https://lkml.org/lkml/2015/12/3/370

Stanimir Varbanov (5):
  PCI: designware: ensure ATU is enabled before IO/conf space accesses
  DT: PCI: qcom: Document PCIe devicetree bindings
  PCI: qcom: Add Qualcomm PCIe controller driver
  ARM: dts: apq8064: add pcie devicetree node
  ARM: dts: ifc6410: enable pcie dt node for this board

 .../devicetree/bindings/pci/qcom,pcie.txt          |  233 ++++++++
 MAINTAINERS                                        |    7 +
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |   26 +
 arch/arm/boot/dts/qcom-apq8064.dtsi                |   36 ++
 drivers/pci/host/Kconfig                           |   10 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pcie-designware.c                 |    7 +
 drivers/pci/host/pcie-qcom.c                       |  617 ++++++++++++++++++++
 8 files changed, 937 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
 create mode 100644 drivers/pci/host/pcie-qcom.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [next] | [standalone]

#1294751 — [PATCH v5 5/5] ARM: dts: ifc6410: enable pcie dt node for this board

Enable pcie dt node and fill pcie dt node with regulator, pinctrl
and reset gpio, to use the pcie on the ifc6410 board.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts |   26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index f40e93f09673..4584850add62 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -47,6 +47,18 @@
 					bias-disable;
 				};
 			};
+
+			pcie_pins: pcie_pinmux {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+				};
+				conf {
+					pins = "gpio27";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
 		};
 
 		rpm@108000 {
@@ -123,6 +135,10 @@
 				lvs1 {
 					bias-pull-down;
 				};
+
+				lvs6 {
+					bias-pull-down;
+				};
 			};
 		};
 
@@ -231,6 +247,16 @@
 			status = "okay";
 		};
 
+		pci@1b500000 {
+			status = "ok";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&ext_3p3v>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
 		qcom,ssbi@500000 {
 			pmic@0 {
 				gpio@150 {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1294776 — [PATCH v5 4/5] ARM: dts: apq8064: add pcie devicetree node

Add the pcie dt node so that it can probe and used.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi |   36 +++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1a57278cb818..495807eab8f3 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -705,5 +705,41 @@
 			compatible = "qcom,tcsr-apq8064", "syscon";
 			reg = <0x1a400000 0x100>;
 		};
+
+		pcie: pci@1b500000 {
+			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
+			reg = <0x1b500000 0x1000
+			       0x1b502000 0x80
+			       0x1b600000 0x100
+			       0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
+				  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
+			interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_REF_CLK>;
+			clock-names = "core", "iface", "phy";
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy";
+			status = "disabled";
+		};
 	};
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1294792 — [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver

From: Stanimir Varbanov <svarbanov@mm-sol.com>

The PCIe driver reuse the Designware common code for host
and MSI initialization, and also program the Qualcomm
application specific registers.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
---
 MAINTAINERS                  |    7 +
 drivers/pci/host/Kconfig     |   10 +
 drivers/pci/host/Makefile    |    1 +
 drivers/pci/host/pcie-qcom.c |  617 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 635 insertions(+)
 create mode 100644 drivers/pci/host/pcie-qcom.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 38df53f828e1..7de5d2597e2b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8247,6 +8247,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
 F:	drivers/pci/host/pcie-hisi.c
 
+PCIE DRIVER FOR QUALCOMM MSM
+M:     Stanimir Varbanov <svarbanov@mm-sol.com>
+L:     linux-pci@vger.kernel.org
+L:     linux-arm-msm@vger.kernel.org
+S:     Maintained
+F:     drivers/pci/host/*qcom*
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia@lists.infradead.org
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index f131ba947dc6..64d33ba3e336 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -172,4 +172,14 @@ config PCI_HISI
 	help
 	  Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
 
+config PCIE_QCOM
+	bool "Qualcomm PCIe controller"
+	depends on ARCH_QCOM && OF || COMPILE_TEST
+	select PCIE_DW
+	select PCIEPORTBUS
+	help
+	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
+	  PCIe controller use Designware core plus Qualcomm specific hardware
+	  wrappers.
+
 endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 9d4d3c6924a1..e523c171febf 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
 obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
+obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c
new file mode 100644
index 000000000000..36c81973467d
--- /dev/null
+++ b/drivers/pci/host/pcie-qcom.c
@@ -0,0 +1,617 @@
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ * Copyright 2015 Linaro Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define PCIE20_PARF_PHY_CTRL			0x40
+#define PCIE20_PARF_PHY_REFCLK			0x4C
+#define PCIE20_PARF_DBI_BASE_ADDR		0x168
+#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE		0x16c
+#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT	0x178
+
+#define PCIE20_ELBI_SYS_CTRL			0x04
+#define PCIE20_ELBI_SYS_CTRL_LT_ENABLE		BIT(0)
+
+#define PCIE20_CAP				0x70
+
+#define PERST_DELAY_US				1000
+
+struct qcom_pcie_resources_v0 {
+	struct clk *iface_clk;
+	struct clk *core_clk;
+	struct clk *phy_clk;
+	struct reset_control *pci_reset;
+	struct reset_control *axi_reset;
+	struct reset_control *ahb_reset;
+	struct reset_control *por_reset;
+	struct reset_control *phy_reset;
+	struct regulator *vdda;
+	struct regulator *vdda_phy;
+	struct regulator *vdda_refclk;
+};
+
+struct qcom_pcie_resources_v1 {
+	struct clk *iface;
+	struct clk *aux;
+	struct clk *master_bus;
+	struct clk *slave_bus;
+	struct reset_control *core;
+	struct regulator *vdda;
+};
+
+union qcom_pcie_resources {
+	struct qcom_pcie_resources_v0 v0;
+	struct qcom_pcie_resources_v1 v1;
+};
+
+struct qcom_pcie;
+
+struct qcom_pcie_ops {
+	int (*get_resources)(struct qcom_pcie *pcie);
+	int (*init)(struct qcom_pcie *pcie);
+	void (*deinit)(struct qcom_pcie *pcie);
+};
+
+struct qcom_pcie {
+	struct pcie_port pp;
+	struct device *dev;
+	union qcom_pcie_resources res;
+	void __iomem *parf;
+	void __iomem *dbi;
+	void __iomem *elbi;
+	struct phy *phy;
+	struct gpio_desc *reset;
+	struct qcom_pcie_ops *ops;
+};
+
+#define to_qcom_pcie(x)		container_of(x, struct qcom_pcie, pp)
+
+static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
+{
+	gpiod_set_value(pcie->reset, 1);
+	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
+}
+
+static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
+{
+	gpiod_set_value(pcie->reset, 0);
+	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
+}
+
+static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
+{
+	struct pcie_port *pp = arg;
+
+	return dw_handle_msi_irq(pp);
+}
+
+static int qcom_pcie_establish_link(struct qcom_pcie *pcie)
+{
+	struct device *dev = pcie->dev;
+	unsigned int retries = 0;
+	u32 val;
+
+	if (dw_pcie_link_up(&pcie->pp))
+		return 0;
+
+	/* enable link training */
+	val = readl(pcie->elbi + PCIE20_ELBI_SYS_CTRL);
+	val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE;
+	writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
+
+	do {
+		if (dw_pcie_link_up(&pcie->pp))
+			return 0;
+		usleep_range(250, 1000);
+	} while (retries < 200);
+
+	dev_warn(dev, "phy link never came up\n");
+
+	return -ETIMEDOUT;
+}
+
+static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct device *dev = pcie->dev;
+
+	res->vdda = devm_regulator_get(dev, "vdda");
+	if (IS_ERR(res->vdda))
+		return PTR_ERR(res->vdda);
+
+	res->vdda_phy = devm_regulator_get(dev, "vdda_phy");
+	if (IS_ERR(res->vdda_phy))
+		return PTR_ERR(res->vdda_phy);
+
+	res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk");
+	if (IS_ERR(res->vdda_refclk))
+		return PTR_ERR(res->vdda_refclk);
+
+	res->iface_clk = devm_clk_get(dev, "iface");
+	if (IS_ERR(res->iface_clk))
+		return PTR_ERR(res->iface_clk);
+
+	res->core_clk = devm_clk_get(dev, "core");
+	if (IS_ERR(res->core_clk))
+		return PTR_ERR(res->core_clk);
+
+	res->phy_clk = devm_clk_get(dev, "phy");
+	if (IS_ERR(res->phy_clk))
+		return PTR_ERR(res->phy_clk);
+
+	res->pci_reset = devm_reset_control_get(dev, "pci");
+	if (IS_ERR(res->pci_reset))
+		return PTR_ERR(res->pci_reset);
+
+	res->axi_reset = devm_reset_control_get(dev, "axi");
+	if (IS_ERR(res->axi_reset))
+		return PTR_ERR(res->axi_reset);
+
+	res->ahb_reset = devm_reset_control_get(dev, "ahb");
+	if (IS_ERR(res->ahb_reset))
+		return PTR_ERR(res->ahb_reset);
+
+	res->por_reset = devm_reset_control_get(dev, "por");
+	if (IS_ERR(res->por_reset))
+		return PTR_ERR(res->por_reset);
+
+	res->phy_reset = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(res->phy_reset))
+		return PTR_ERR(res->phy_reset);
+
+	return 0;
+}
+
+static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct device *dev = pcie->dev;
+
+	res->vdda = devm_regulator_get(dev, "vdda");
+	if (IS_ERR(res->vdda))
+		return PTR_ERR(res->vdda);
+
+	res->iface = devm_clk_get(dev, "iface");
+	if (IS_ERR(res->iface))
+		return PTR_ERR(res->iface);
+
+	res->aux = devm_clk_get(dev, "aux");
+	if (IS_ERR(res->aux))
+		return PTR_ERR(res->aux);
+
+	res->master_bus = devm_clk_get(dev, "master_bus");
+	if (IS_ERR(res->master_bus))
+		return PTR_ERR(res->master_bus);
+
+	res->slave_bus = devm_clk_get(dev, "slave_bus");
+	if (IS_ERR(res->slave_bus))
+		return PTR_ERR(res->slave_bus);
+
+	res->core = devm_reset_control_get(dev, "core");
+	if (IS_ERR(res->core))
+		return PTR_ERR(res->core);
+
+	return 0;
+}
+
+static void qcom_pcie_deinit_v0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+
+	reset_control_assert(res->pci_reset);
+	reset_control_assert(res->axi_reset);
+	reset_control_assert(res->ahb_reset);
+	reset_control_assert(res->por_reset);
+	reset_control_assert(res->pci_reset);
+	clk_disable_unprepare(res->iface_clk);
+	clk_disable_unprepare(res->core_clk);
+	clk_disable_unprepare(res->phy_clk);
+	regulator_disable(res->vdda);
+	regulator_disable(res->vdda_phy);
+	regulator_disable(res->vdda_refclk);
+}
+
+static int qcom_pcie_init_v0(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct device *dev = pcie->dev;
+	u32 val;
+	int ret;
+
+	ret = regulator_enable(res->vdda);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda regulator\n");
+		return ret;
+	}
+
+	ret = regulator_enable(res->vdda_refclk);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda_refclk regulator\n");
+		goto err_refclk;
+	}
+
+	ret = regulator_enable(res->vdda_phy);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda_phy regulator\n");
+		goto err_vdda_phy;
+	}
+
+	ret = reset_control_assert(res->ahb_reset);
+	if (ret) {
+		dev_err(dev, "cannot assert ahb reset\n");
+		goto err_assert_ahb;
+	}
+
+	ret = clk_prepare_enable(res->iface_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable iface clock\n");
+		goto err_assert_ahb;
+	}
+
+	ret = clk_prepare_enable(res->phy_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable phy clock\n");
+		goto err_clk_phy;
+	}
+
+	ret = clk_prepare_enable(res->core_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable core clock\n");
+		goto err_clk_core;
+	}
+
+	ret = reset_control_deassert(res->ahb_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert ahb reset\n");
+		goto err_deassert_ahb;
+	}
+
+	/* enable PCIe clocks and resets */
+	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+	val &= ~BIT(0);
+	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
+	/* enable external reference clock */
+	val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
+	val |= BIT(16);
+	writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
+
+	ret = reset_control_deassert(res->phy_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert phy reset\n");
+		return ret;
+	}
+
+	ret = reset_control_deassert(res->pci_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert pci reset\n");
+		return ret;
+	}
+
+	ret = reset_control_deassert(res->por_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert por reset\n");
+		return ret;
+	}
+
+	ret = reset_control_deassert(res->axi_reset);
+	if (ret) {
+		dev_err(dev, "cannot deassert axi reset\n");
+		return ret;
+	}
+
+	/* wait for clock acquisition */
+	usleep_range(1000, 1500);
+
+	return 0;
+
+err_deassert_ahb:
+	clk_disable_unprepare(res->core_clk);
+err_clk_core:
+	clk_disable_unprepare(res->phy_clk);
+err_clk_phy:
+	clk_disable_unprepare(res->iface_clk);
+err_assert_ahb:
+	regulator_disable(res->vdda_phy);
+err_vdda_phy:
+	regulator_disable(res->vdda_refclk);
+err_refclk:
+	regulator_disable(res->vdda);
+
+	return ret;
+}
+
+static void qcom_pcie_deinit_v1(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+
+	reset_control_assert(res->core);
+	clk_disable_unprepare(res->slave_bus);
+	clk_disable_unprepare(res->master_bus);
+	clk_disable_unprepare(res->iface);
+	clk_disable_unprepare(res->aux);
+	regulator_disable(res->vdda);
+}
+
+static int qcom_pcie_init_v1(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct device *dev = pcie->dev;
+	int ret;
+
+	ret = reset_control_deassert(res->core);
+	if (ret) {
+		dev_err(dev, "cannot deassert core reset\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(res->aux);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable aux clock\n");
+		goto err_res;
+	}
+
+	ret = clk_prepare_enable(res->iface);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable iface clock\n");
+		goto err_aux;
+	}
+
+	ret = clk_prepare_enable(res->master_bus);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable master_bus clock\n");
+		goto err_iface;
+	}
+
+	ret = clk_prepare_enable(res->slave_bus);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable slave_bus clock\n");
+		goto err_master;
+	}
+
+	ret = regulator_enable(res->vdda);
+	if (ret) {
+		dev_err(dev, "cannot enable vdda regulator\n");
+		goto err_slave;
+	}
+
+
+	/* change DBI base address */
+	writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+
+		val |= BIT(31);
+		writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+	}
+
+	return 0;
+err_slave:
+	clk_disable_unprepare(res->slave_bus);
+err_master:
+	clk_disable_unprepare(res->master_bus);
+err_iface:
+	clk_disable_unprepare(res->iface);
+err_aux:
+	clk_disable_unprepare(res->aux);
+err_res:
+	reset_control_assert(res->core);
+
+	return ret;
+}
+
+static int qcom_pcie_link_up(struct pcie_port *pp)
+{
+	struct qcom_pcie *pcie = to_qcom_pcie(pp);
+	u16 val = readw(pcie->dbi + PCIE20_CAP + PCI_EXP_LNKSTA);
+
+	return !!(val & PCI_EXP_LNKSTA_DLLLA);
+}
+
+static void qcom_pcie_host_init(struct pcie_port *pp)
+{
+	struct qcom_pcie *pcie = to_qcom_pcie(pp);
+	int ret;
+
+	qcom_ep_reset_assert(pcie);
+
+	ret = pcie->ops->init(pcie);
+	if (ret)
+		goto err_deinit;
+
+	ret = phy_power_on(pcie->phy);
+	if (ret)
+		goto err_deinit;
+
+	dw_pcie_setup_rc(pp);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		dw_pcie_msi_init(pp);
+
+	qcom_ep_reset_deassert(pcie);
+
+	ret = qcom_pcie_establish_link(pcie);
+	if (ret)
+		goto err;
+
+	return;
+err:
+	qcom_ep_reset_assert(pcie);
+	phy_power_off(pcie->phy);
+err_deinit:
+	pcie->ops->deinit(pcie);
+}
+
+static int
+qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, u32 *val)
+{
+	/* the device class is not reported correctly from the register */
+	if (where == PCI_CLASS_REVISION && size == 4) {
+		*val = readl(pp->dbi_base + PCI_CLASS_REVISION);
+		*val &= 0xff;	/* keep revision id */
+		*val |= PCI_CLASS_BRIDGE_PCI << 16;
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	return dw_pcie_cfg_read(pp->dbi_base + where, size, val);
+}
+
+static struct pcie_host_ops qcom_pcie_dw_ops = {
+	.link_up = qcom_pcie_link_up,
+	.host_init = qcom_pcie_host_init,
+	.rd_own_conf = qcom_pcie_rd_own_conf,
+};
+
+static const struct qcom_pcie_ops ops_v0 = {
+	.get_resources = qcom_pcie_get_resources_v0,
+	.init = qcom_pcie_init_v0,
+	.deinit = qcom_pcie_deinit_v0,
+};
+
+static const struct qcom_pcie_ops ops_v1 = {
+	.get_resources = qcom_pcie_get_resources_v1,
+	.init = qcom_pcie_init_v1,
+	.deinit = qcom_pcie_deinit_v1,
+};
+
+static int qcom_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct qcom_pcie *pcie;
+	struct pcie_port *pp;
+	int ret;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pcie->ops = (struct qcom_pcie_ops *)of_device_get_match_data(dev);
+	pcie->dev = dev;
+
+	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);
+	if (IS_ERR(pcie->reset))
+		return PTR_ERR(pcie->reset);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+	pcie->parf = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pcie->parf))
+		return PTR_ERR(pcie->parf);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+	pcie->dbi = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pcie->dbi))
+		return PTR_ERR(pcie->dbi);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
+	pcie->elbi = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pcie->elbi))
+		return PTR_ERR(pcie->elbi);
+
+	pcie->phy = devm_phy_optional_get(dev, "pciephy");
+	if (IS_ERR(pcie->phy))
+		return PTR_ERR(pcie->phy);
+
+	ret = pcie->ops->get_resources(pcie);
+	if (ret)
+		return ret;
+
+	pp = &pcie->pp;
+	pp->dev = dev;
+	pp->dbi_base = pcie->dbi;
+	pp->root_bus_nr = -1;
+	pp->ops = &qcom_pcie_dw_ops;
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
+		if (pp->msi_irq < 0)
+			return pp->msi_irq;
+
+		ret = devm_request_irq(dev, pp->msi_irq,
+				       qcom_pcie_msi_irq_handler,
+				       IRQF_SHARED, "qcom-pcie-msi", pp);
+		if (ret) {
+			dev_err(dev, "cannot request msi irq\n");
+			return ret;
+		}
+	}
+
+	ret = phy_init(pcie->phy);
+	if (ret)
+		return ret;
+
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		dev_err(dev, "cannot initialize host\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pcie);
+
+	return 0;
+}
+
+static int qcom_pcie_remove(struct platform_device *pdev)
+{
+	struct qcom_pcie *pcie = platform_get_drvdata(pdev);
+
+	qcom_ep_reset_assert(pcie);
+	phy_power_off(pcie->phy);
+	phy_exit(pcie->phy);
+	pcie->ops->deinit(pcie);
+
+	return 0;
+}
+
+static const struct of_device_id qcom_pcie_match[] = {
+	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_v0 },
+	{ .compatible = "qcom,pcie-apq8064", .data = &ops_v0 },
+	{ .compatible = "qcom,pcie-apq8084", .data = &ops_v1 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_pcie_match);
+
+static struct platform_driver qcom_pcie_driver = {
+	.probe = qcom_pcie_probe,
+	.remove = qcom_pcie_remove,
+	.driver = {
+		.name = "qcom-pcie",
+		.of_match_table = qcom_pcie_match,
+	},
+};
+
+module_platform_driver(qcom_pcie_driver);
+
+MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
+MODULE_DESCRIPTION("Qualcomm PCIe root complex driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1294816 — [PATCH] PCI: qcom: fix ptr_ret.cocci warnings

drivers/pci/host/pcie-qcom.c:188:1-3: WARNING: PTR_ERR_OR_ZERO can be used
drivers/pci/host/pcie-qcom.c:220:1-3: WARNING: PTR_ERR_OR_ZERO can be used


 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

CC: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 pcie-qcom.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/drivers/pci/host/pcie-qcom.c
+++ b/drivers/pci/host/pcie-qcom.c
@@ -185,10 +185,7 @@ static int qcom_pcie_get_resources_v0(st
 		return PTR_ERR(res->por_reset);
 
 	res->phy_reset = devm_reset_control_get(dev, "phy");
-	if (IS_ERR(res->phy_reset))
-		return PTR_ERR(res->phy_reset);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(res->phy_reset);
 }
 
 static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
@@ -217,10 +214,7 @@ static int qcom_pcie_get_resources_v1(st
 		return PTR_ERR(res->slave_bus);
 
 	res->core = devm_reset_control_get(dev, "core");
-	if (IS_ERR(res->core))
-		return PTR_ERR(res->core);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(res->core);
 }
 
 static void qcom_pcie_deinit_v0(struct qcom_pcie *pcie)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1294825 — Re: [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver

Hi Stanimir,

[auto build test WARNING on next-20151218]
[also build test WARNING on v4.4-rc5]
[cannot apply to pci/next robh/for-next v4.4-rc5 v4.4-rc4 v4.4-rc3]

url:    https://github.com/0day-ci/linux/commits/Stanimir-Varbanov/Qualcomm-PCIe-driver-and-designware-fixes/20151218-205427


coccinelle warnings: (new ones prefixed by >>)

>> drivers/pci/host/pcie-qcom.c:188:1-3: WARNING: PTR_ERR_OR_ZERO can be used
   drivers/pci/host/pcie-qcom.c:220:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1295707 — Re: [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver

On Fri, Dec 18, 2015 at 5:44 AM, kbuild test robot <lkp@intel.com> wrote:
> Hi Stanimir,
>
> [auto build test WARNING on next-20151218]
> [also build test WARNING on v4.4-rc5]
> [cannot apply to pci/next robh/for-next v4.4-rc5 v4.4-rc4 v4.4-rc3]
>
> url:    https://github.com/0day-ci/linux/commits/Stanimir-Varbanov/Qualcomm-PCIe-driver-and-designware-fixes/20151218-205427
>
>
> coccinelle warnings: (new ones prefixed by >>)
>
>>> drivers/pci/host/pcie-qcom.c:188:1-3: WARNING: PTR_ERR_OR_ZERO can be used
>    drivers/pci/host/pcie-qcom.c:220:1-3: WARNING: PTR_ERR_OR_ZERO can be used
>
> Please review and possibly fold the followup patch.
>

I disagree with this "recommendation" as it's only outcome will be asymmetry.

I think this script should be changed to only warn if there's a single
IS_ERR/PTR_ERR at the end of the function, not if there's a list of
them and this would replace the last one.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [next] | [standalone]

#1296287 — Re: [PATCH v5 3/5] PCI: qcom: Add Qualcomm PCIe controller driver

On Monday 21 December 2015, Bjorn Andersson wrote:
> I disagree with this "recommendation" as it's only outcome will be asymmetry.
> 
> I think this script should be changed to only warn if there's a single
> IS_ERR/PTR_ERR at the end of the function, not if there's a list of
> them and this would replace the last one.
> 

Agreed, looks like a false positive, and I think it's best to ignore the
warning here, but not change the script that seems reasonable in general.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web