Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1738185
| From | Vignesh R <vigneshr@ti.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support |
| Date | 2017-09-24 15:20 +0200 |
| Message-ID | <uteZc-JV-3@gated-at.bofh.it> (permalink) |
| References | <utcXo-7Yz-5@gated-at.bofh.it> <utcXo-7Yz-7@gated-at.bofh.it> <ute38-as-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 9/24/2017 5:31 PM, Marek Vasut wrote:
> On 09/24/2017 12:59 PM, Vignesh R wrote:
>> Add pm_runtime* calls to cadence-quadspi driver. This is required to
>> switch on QSPI power domain on TI 66AK2G SoC during probe.
>>
>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>
> Are you planning to add some more fine-grained PM control later?
Yes, I will need to add fine-grained PM control at some point. But, for
now SoC does not really support low power mode or runtime power saving
option.
The fact that driver still uses clk_prepare_*() calls to enable/disable
clocks instead of pm_*() calls makes it a bit tricky though.
Just figured out I forgot to add cleanup code in error handling path of
probe(). Will fix that and send a v4.
>
>> ---
>> drivers/mtd/spi-nor/cadence-quadspi.c | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
>> index d9629e8f4798..2c8e6226d267 100644
>> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
>> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
>> @@ -31,6 +31,7 @@
>> #include <linux/of_device.h>
>> #include <linux/of.h>
>> #include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> #include <linux/sched.h>
>> #include <linux/spi/spi.h>
>> #include <linux/timer.h>
>> @@ -1224,6 +1225,13 @@ static int cqspi_probe(struct platform_device *pdev)
>> return -ENXIO;
>> }
>>
>> + pm_runtime_enable(&pdev->dev);
>> + ret = pm_runtime_get_sync(&pdev->dev);
>> + if (ret < 0) {
>> + pm_runtime_put_noidle(&pdev->dev);
>> + return ret;
>> + }
>> +
>> ret = clk_prepare_enable(cqspi->clk);
>> if (ret) {
>> dev_err(dev, "Cannot enable QSPI clock.\n");
>> @@ -1275,6 +1283,9 @@ static int cqspi_remove(struct platform_device *pdev)
>>
>> clk_disable_unprepare(cqspi->clk);
>>
>> + pm_runtime_put_sync(&pdev->dev);
>> + pm_runtime_disable(&pdev->dev);
>> +
>> return 0;
>> }
>>
>>
>
>
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support Vignesh R <vigneshr@ti.com> - 2017-09-24 13:10 +0200
Re: [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support Marek Vasut <marek.vasut@gmail.com> - 2017-09-24 14:20 +0200
Re: [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support Marek Vasut <marek.vasut@gmail.com> - 2017-09-24 15:20 +0200
Re: [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support Vignesh R <vigneshr@ti.com> - 2017-09-24 15:30 +0200
Re: [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support Marek Vasut <marek.vasut@gmail.com> - 2017-09-24 16:00 +0200
Re: [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support matthew.gerlach@linux.intel.com - 2017-09-26 00:50 +0200
Re: [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support Marek Vasut <marek.vasut@gmail.com> - 2017-09-26 02:00 +0200
Re: [PATCH v3 5/5] mtd: spi-nor: cadence-quadspi: Add runtime PM support Vignesh R <vigneshr@ti.com> - 2017-09-24 15:20 +0200
csiph-web