[PATCH v4 0/2] add thermal nodes for UniPhier SoCs

From	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Newsgroups	linux.kernel
Subject	[PATCH v4 0/2] add thermal nodes for UniPhier SoCs
Date	2017-09-04 03:20 +0200
Message-ID	<ulOdr-7lZ-3@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

This series adds thermal nodes for UniPhier PXs2 and LD20 SoCs.

Changes since v3:
- rebase on top of linux-next

Changes since v2:
- add the calibration value to device tree for LD20 reference board

Changes since v1:
- separate from driver's patchset[1]
- add cooling-maps nodes on the device tree
- fix an interrupt trigger to set 'level-triggered' according to
  hardware specification
- bring up threshold temperature for LD20 according to the spec sheet
- add cpuN labels for reference in cooling-device property on PXs2 dts

[1] https://lkml.org/lkml/2017/6/28/170

Kunihiko Hayashi (2):
  ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for
    PXs2
  arm64: dts: uniphier: add nodes of thermal monitor and thermal zone
    for LD20

 arch/arm/boot/dts/uniphier-pxs2.dtsi               | 43 ++++++++++++++++++++--
 .../arm64/boot/dts/socionext/uniphier-ld20-ref.dts |  4 ++
 arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi   | 40 ++++++++++++++++++++
 3 files changed, 83 insertions(+), 4 deletions(-)

-- 
2.7.4

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v4 0/2] add thermal nodes for UniPhier SoCs Kunihiko Hayashi <hayashi.kunihiko@socionext.com> - 2017-09-04 03:20 +0200
  [PATCH v4 2/2] arm64: dts: uniphier: add nodes of thermal monitor and thermal zone for LD20 Kunihiko Hayashi <hayashi.kunihiko@socionext.com> - 2017-09-04 03:20 +0200
  Re: [PATCH v4 0/2] add thermal nodes for UniPhier SoCs Masahiro Yamada <yamada.masahiro@socionext.com> - 2017-09-04 04:20 +0200
    Re: [PATCH v4 0/2] add thermal nodes for UniPhier SoCs <hayashi.kunihiko@socionext.com> - 2017-09-04 06:00 +0200

csiph-web