RE: [v6] wlcore: add missing nvs file name info for wilink8

From	"Reizer, Eyal" <eyalr@ti.com>
Newsgroups	linux.kernel
Subject	RE: [v6] wlcore: add missing nvs file name info for wilink8
Date	2017-08-10 16:30 +0200
Message-ID	<ucWDf-6RR-13@gated-at.bofh.it> (permalink)
References	<ucu4h-44e-9@gated-at.bofh.it> <ucu4h-44e-7@gated-at.bofh.it> <ucCXT-1Uf-19@gated-at.bofh.it> <ucGyt-4l3-15@gated-at.bofh.it> <ucGyt-4l3-13@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

> >
> 
> Sure, just want to make sure we are not trying to add work around just for
> A couple of faulty devices.
> 
> > > I have verified using a couple of com6 modules with an am335x-evm and
> > they had mac addresses read ok.
> >
> > Sounds like there are multiple variants of the wl12xx
> > available then.
> >
> I am trying to find out internally if there is a possibility that there were
> devices
> Produced in the past where the internal fuses were not programmed with a
> valid
> Address before being assembled into the modules.
> 

Seems like MAC address for wilink6/7 was added to devices that were produced  around Q3 of 2010 
In case you still have this omap3-evm up and can just do a quick check for me as I don't have this board, can you try using the following command:

cat /sys/bus/platform/drivers/wl12xx_driver/wl12xx.0.auto/hw_pg_ver

and let me know what the output you get is?

Best Regards,
Eyal

Thread

[v6] wlcore: add missing nvs file name info for wilink8 "Reizer, Eyal" <eyalr@ti.com> - 2017-08-09 10:00 +0200
  Re: [v6] wlcore: add missing nvs file name info for wilink8 Tony Lindgren <tony@atomide.com> - 2017-08-09 19:30 +0200
  Re: [v6] wlcore: add missing nvs file name info for wilink8 Tony Lindgren <tony@atomide.com> - 2017-08-09 19:30 +0200
    Re: [v6] wlcore: add missing nvs file name info for wilink8 Tony Lindgren <tony@atomide.com> - 2017-08-09 23:20 +0200
      RE: [v6] wlcore: add missing nvs file name info for wilink8 "Reizer, Eyal" <eyalr@ti.com> - 2017-08-10 08:40 +0200
        Re: [v6] wlcore: add missing nvs file name info for wilink8 Kalle Valo <kvalo@codeaurora.org> - 2017-08-10 09:50 +0200
          RE: [v6] wlcore: add missing nvs file name info for wilink8 "Reizer, Eyal" <eyalr@ti.com> - 2017-08-10 10:00 +0200
        Re: [v6] wlcore: add missing nvs file name info for wilink8 Julian Calaby <julian.calaby@gmail.com> - 2017-08-10 10:00 +0200
          RE: [v6] wlcore: add missing nvs file name info for wilink8 "Reizer, Eyal" <eyalr@ti.com> - 2017-08-10 10:00 +0200
      RE: [v6] wlcore: add missing nvs file name info for wilink8 "Reizer, Eyal" <eyalr@ti.com> - 2017-08-10 16:30 +0200
        Re: [v6] wlcore: add missing nvs file name info for wilink8 Tony Lindgren <tony@atomide.com> - 2017-08-10 19:30 +0200

csiph-web