Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1691618
| From | Abhishek Sahu <absahu@codeaurora.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH v2 16/25] mtd: nand: qcom: allocate BAM transaction |
| Date | 2017-07-19 14:00 +0200 |
| Message-ID | <u4VO3-85k-57@gated-at.bofh.it> (permalink) |
| References | <u4VEl-7Z9-9@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
The BAM transaction is the core data structure which will be used
for all the data transfers in QPIC NAND. Since the base layer is
serializing all the NAND requests so allocating BAM transaction
before every transfer will be overhead. The memory for it be
allocated during probe time and before every transfer, it will be
cleared. The BAM transaction contains the array of command
elements, command and data scatter gather list and indexes. For
every transfer, all the resource will be taken from BAM
transaction.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
drivers/mtd/nand/qcom_nandc.c | 114 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
index f49c3da..fc29c97 100644
--- a/drivers/mtd/nand/qcom_nandc.c
+++ b/drivers/mtd/nand/qcom_nandc.c
@@ -22,6 +22,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/delay.h>
+#include <linux/dma/qcom_bam_dma.h>
/* NANDc reg offsets */
#define NAND_FLASH_CMD 0x00
@@ -172,6 +173,45 @@
#define ECC_BCH_4BIT BIT(2)
#define ECC_BCH_8BIT BIT(3)
+#define QPIC_PER_CW_CMD_ELEMENTS 32
+#define QPIC_PER_CW_CMD_SGL 32
+#define QPIC_PER_CW_DATA_SGL 8
+
+/*
+ * This data type corresponds to the BAM transaction which will be used for all
+ * NAND transfers.
+ * @bam_ce - the array of bam command elements
+ * @cmd_sgl - sgl for nand bam command pipe
+ * @data_sgl - sgl for nand bam consumer/producer pipe
+ * @bam_ce_pos - the index in bam_ce which is available for next sgl request
+ * @bam_ce_start - the index in bam_ce which marks the start position ce
+ * for current sgl. It will be used for size calculation
+ * for current sgl
+ * @cmd_sgl_pos - current index in command sgl.
+ * @tx_sgl_pos - current index in data sgl for tx.
+ * @rx_sgl_pos - current index in data sgl for rx.
+ */
+struct bam_transaction {
+ struct bam_cmd_element *bam_ce;
+ struct scatterlist *cmd_sgl;
+ struct scatterlist *data_sgl;
+ u32 bam_ce_pos;
+ u32 bam_ce_start;
+ u32 cmd_sgl_pos;
+ u32 cmd_sgl_start;
+ u32 tx_sgl_pos;
+ u32 tx_sgl_start;
+ u32 rx_sgl_pos;
+ u32 rx_sgl_start;
+};
+
+/*
+ * This data type corresponds to the nand dma descriptor
+ * @list - list for desc_info
+ * @dir - DMA transfer direction
+ * @sgl - sgl which will be used for single sgl dma descriptor
+ * @dma_desc - low level dma engine descriptor
+ */
struct desc_info {
struct list_head node;
@@ -238,6 +278,8 @@ struct nandc_regs {
* @cmd1/vld: some fixed controller register values
* @props: properties of current NAND controller IP,
* initialized via DT match data
+ * @max_cwperpage: maximum qpic codeword required. calcualted
+ * from all nand device pagesize
*/
struct qcom_nand_controller {
struct nand_hw_control controller;
@@ -265,11 +307,13 @@ struct qcom_nand_controller {
};
struct list_head desc_list;
+ struct bam_transaction *bam_txn;
u8 *data_buffer;
int buf_size;
int buf_count;
int buf_start;
+ unsigned int max_cwperpage;
__le32 *reg_read_buf;
dma_addr_t reg_read_buf_phys;
@@ -342,6 +386,50 @@ struct qcom_props {
bool is_bam;
};
+/* Frees the BAM transaction memory */
+static void free_bam_transaction(struct qcom_nand_controller *nandc)
+{
+ struct bam_transaction *bam_txn = nandc->bam_txn;
+
+ devm_kfree(nandc->dev, bam_txn);
+}
+
+/* Allocates and Initializes the BAM transaction */
+static struct bam_transaction *
+alloc_bam_transaction(struct qcom_nand_controller *nandc)
+{
+ struct bam_transaction *bam_txn;
+ size_t bam_txn_size;
+ unsigned int num_cw = nandc->max_cwperpage;
+ void *bam_txn_buf;
+
+ bam_txn_size =
+ sizeof(*bam_txn) + num_cw *
+ ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) +
+ (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) +
+ (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL));
+
+ bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL);
+ if (!bam_txn_buf)
+ return NULL;
+
+ bam_txn = bam_txn_buf;
+ bam_txn_buf += sizeof(*bam_txn);
+
+ bam_txn->bam_ce = bam_txn_buf;
+ bam_txn_buf +=
+ sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw;
+
+ bam_txn->cmd_sgl = bam_txn_buf;
+ bam_txn_buf +=
+ sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_SGL * num_cw;
+
+ bam_txn->data_sgl = bam_txn_buf;
+ nandc->max_cwperpage = num_cw;
+
+ return bam_txn;
+}
+
static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip)
{
return container_of(chip, struct qcom_nand_host, chip);
@@ -1913,6 +2001,8 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host)
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
cwperpage = mtd->writesize / ecc->size;
+ nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage,
+ cwperpage);
/*
* DATA_UD_BYTES varies based on whether the read/write command protects
@@ -2047,6 +2137,20 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
dev_err(nandc->dev, "failed to request cmd channel\n");
return -ENODEV;
}
+
+ /*
+ * Initially allocate BAM transaction to read ONFI param page.
+ * After detecting all the devices, this BAM transaction will
+ * be freed and the next BAM tranasction will be allocated with
+ * maximum codeword size
+ */
+ nandc->max_cwperpage = 1;
+ nandc->bam_txn = alloc_bam_transaction(nandc);
+ if (!nandc->bam_txn) {
+ dev_err(nandc->dev,
+ "failed to allocate bam transaction\n");
+ return -ENOMEM;
+ }
} else {
nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx");
if (!nandc->chan) {
@@ -2202,6 +2306,16 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc)
if (list_empty(&nandc->host_list))
return -ENODEV;
+ if (nandc->props->is_bam) {
+ free_bam_transaction(nandc);
+ nandc->bam_txn = alloc_bam_transaction(nandc);
+ if (!nandc->bam_txn) {
+ dev_err(nandc->dev,
+ "failed to allocate bam transaction\n");
+ return -ENOMEM;
+ }
+ }
+
list_for_each_entry_safe(host, tmp, &nandc->host_list, node) {
ret = qcom_nand_mtd_register(nandc, host, child);
if (ret) {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v2 00/25] Add QCOM QPIC NAND support Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 13:50 +0200
[PATCH v2 09/25] mtd: nand: qcom: remove memset for clearing read register buffer Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 10/25] mtd: nand: qcom: reorganize nand devices probing Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 23/25] mtd: nand: qcom: change register offset defines with enums Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 20/25] mtd: nand: qcom: erased codeword detection configuration Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 08/25] mtd: nand: qcom: reorganize nand page write Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 18/25] mtd: nand: qcom: support for passing flags in transfer functions Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 25/25] mtd: nand: qcom: support for QPIC version 1.5.0 Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 22/25] mtd: nand: qcom: QPIC raw write support Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Boris Brezillon <boris.brezillon@free-electrons.com> - 2017-07-19 21:40 +0200
Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Abhishek Sahu <absahu@codeaurora.org> - 2017-07-20 07:40 +0200
Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Rob Herring <robh@kernel.org> - 2017-07-24 21:20 +0200
Re: [PATCH v2 12/25] dt-bindings: qcom_nandc: QPIC NAND documentation Abhishek Sahu <absahu@codeaurora.org> - 2017-07-25 20:50 +0200
[PATCH v2 21/25] mtd: nand: qcom: support for QPIC page read/write Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 15/25] mtd: nand: qcom: DMA mapping support for register read buffer Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 19/25] mtd: nand: qcom: support for read location registers Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 24/25] dt-bindings: qcom_nandc: compatible string for version 1.5.0 Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 11/25] mtd: nand: qcom: support for NAND controller properties Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 13/25] mtd: nand: qcom: add QPIC NAND compatible string Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 17/25] mtd: nand: qcom: add BAM DMA descriptor handling Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 16/25] mtd: nand: qcom: allocate BAM transaction Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 07/25] mtd: nand: qcom: reorganize nand page read Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
[PATCH v2 14/25] mtd: nand: qcom: add and initialize QPIC DMA resources Abhishek Sahu <absahu@codeaurora.org> - 2017-07-19 14:00 +0200
csiph-web