Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1687666

[PATCH v2 1/2] dt-bindings: net: Add bindings for National Instruments XGE netdev

From Moritz Fischer <mdf@kernel.org>
Newsgroups linux.kernel
Subject [PATCH v2 1/2] dt-bindings: net: Add bindings for National Instruments XGE netdev
Date 2017-07-14 23:00 +0200
Message-ID <u3fQR-eC-11@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


This adds bindings for the NI XGE 1G/10G network device.

Signed-off-by: Moritz Fischer <mdf@kernel.org>
---
 Documentation/devicetree/bindings/net/nixge.txt | 32 +++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/nixge.txt

diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt
new file mode 100644
index 0000000..9fff5a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nixge.txt
@@ -0,0 +1,32 @@
+* NI XGE Ethernet controller
+
+Required properties:
+- compatible: Should be "ni,xge-enet-2.00"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain tx and rx interrupt
+- interrupt-names: Should be "rx-irq" and "tx-irq"
+- phy-mode: See ethernet.txt file in the same directory.
+- nvmem-cells: Phandle of nvmem cell containing the mac address
+- nvmem-cell-names: Should be "address"
+
+Examples (10G generic PHY):
+	nixge0: ethernet@40000000 {
+		compatible = "ni,xge-enet-2.00";
+		reg = <0x40000000 0x6000>;
+
+		nvmem-cells = <&eth1_addr>;
+		nvmem-cell-names = "address";
+
+		interrupts = <0 29 4>, <0 30 4>;
+		interrupt-names = "rx-irq", "tx-irq";
+		interrupt-parent = <&intc>;
+
+		phy-mode = "xgmii";
+		phy-handle = <&ethernet_phy1>;
+
+		ethernet_phy1: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <4>;
+			devices = <0xa>;
+		};
+	};
-- 
2.7.4

Back to linux.kernel | Previous | NextNext in thread | Find similar | Unroll thread


Thread

[PATCH v2 1/2] dt-bindings: net: Add bindings for National Instruments XGE netdev Moritz Fischer <mdf@kernel.org> - 2017-07-14 23:00 +0200
  [PATCH v2 2/2] net: ethernet: nixge: Add support for National Instruments XGE netdev Moritz Fischer <mdf@kernel.org> - 2017-07-14 23:00 +0200
    Re: [PATCH v2 2/2] net: ethernet: nixge: Add support for National  Instruments XGE netdev Florian Fainelli <f.fainelli@gmail.com> - 2017-07-15 00:20 +0200
    Re: [PATCH v2 2/2] net: ethernet: nixge: Add support for National  Instruments XGE netdev Andrew Lunn <andrew@lunn.ch> - 2017-07-15 18:50 +0200
  Re: [PATCH v2 1/2] dt-bindings: net: Add bindings for National  Instruments XGE netdev Andrew Lunn <andrew@lunn.ch> - 2017-07-15 20:40 +0200
    Re: [PATCH v2 1/2] dt-bindings: net: Add bindings for National  Instruments XGE netdev Moritz Fischer <mdf@kernel.org> - 2017-07-15 20:50 +0200
      Re: [PATCH v2 1/2] dt-bindings: net: Add bindings for National  Instruments XGE netdev Andrew Lunn <andrew@lunn.ch> - 2017-07-15 21:50 +0200
        Re: [PATCH v2 1/2] dt-bindings: net: Add bindings for National  Instruments XGE netdev Moritz Fischer <mdf@kernel.org> - 2017-07-17 18:50 +0200
  Re: [PATCH v2 1/2] dt-bindings: net: Add bindings for National  Instruments XGE netdev Rob Herring <robh@kernel.org> - 2017-07-17 21:10 +0200

csiph-web