Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1682312

Re: [PATCH] clk: qcom: clk-smd-rpm: Fix the initial rate of branches

Show all headers | View raw

On 07/06/17 11:53, Archit Taneja wrote:
> 
> 
> On 07/04/2017 06:04 PM, Georgi Djakov wrote:
>> As there is no way to actually query the hardware for the current clock
>> rate, now racalc_rate() just returns the last rate that was previously
>> set. But if the rate was not set yet, we return the bogus rate of 1KHz.
>>
>> Knowing what the rate of XO is and that some clocks are just branches of
>> it, we can do better and return that rate instead of a bogus one.
> 
> +Hans.
> 
> Thanks for the fix.
> 
> Reviewed-by: Archit Taneja <architt@codeaurora.org>

Tested-by: Hans Verkuil <hans.verkuil@cisco.com>

(Tested with the upcoming HDMI CEC driver for the adv7511/33)

Regards,

	Hans

>>
>> Reported-by: Archit Taneja <architt@codeaurora.org>
>> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
>> ---
>>   drivers/clk/qcom/clk-smd-rpm.c | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
>> index d990fe44aef3..7350a43b0573 100644
>> --- a/drivers/clk/qcom/clk-smd-rpm.c
>> +++ b/drivers/clk/qcom/clk-smd-rpm.c
>> @@ -116,12 +116,12 @@
>>   
>>   #define DEFINE_CLK_SMD_RPM_XO_BUFFER(_platform, _name, _active, r_id)	      \
>>   		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
>> -		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000,			      \
>> +		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 19200000,		      \
>>   		QCOM_RPM_KEY_SOFTWARE_ENABLE)
>>   
>>   #define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_platform, _name, _active, r_id) \
>>   		__DEFINE_CLK_SMD_RPM_BRANCH(_platform, _name, _active,	      \
>> -		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 1000,			      \
>> +		QCOM_SMD_RPM_CLK_BUF_A, r_id, 0, 19200000,		      \
>>   		QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
>>   
>>   #define to_clk_smd_rpm(_hw) container_of(_hw, struct clk_smd_rpm, hw)
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
> 

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] clk: qcom: clk-smd-rpm: Fix the initial rate of branches Georgi Djakov <georgi.djakov@linaro.org> - 2017-07-04 14:40 +0200
  Re: [PATCH] clk: qcom: clk-smd-rpm: Fix the initial rate of branches Archit Taneja <architt@codeaurora.org> - 2017-07-06 12:00 +0200
    Re: [PATCH] clk: qcom: clk-smd-rpm: Fix the initial rate of branches Hans Verkuil <hverkuil@xs4all.nl> - 2017-07-06 12:20 +0200
  Re: [PATCH] clk: qcom: clk-smd-rpm: Fix the initial rate of branches Stephen Boyd <sboyd@codeaurora.org> - 2017-07-13 01:20 +0200
  Re: [PATCH] clk: qcom: clk-smd-rpm: Fix the initial rate of branches Stephen Boyd <sboyd@codeaurora.org> - 2017-07-13 01:20 +0200
    [PATCH v2] clk: qcom: clk-smd-rpm: Fix the reported rate of branches Georgi Djakov <georgi.djakov@linaro.org> - 2017-07-13 15:40 +0200
      Re: [PATCH v2] clk: qcom: clk-smd-rpm: Fix the reported rate of  branches Stephen Boyd <sboyd@codeaurora.org> - 2017-07-14 00:00 +0200
        Re: [PATCH v2] clk: qcom: clk-smd-rpm: Fix the reported rate of  branches Georgi Djakov <georgi.djakov@linaro.org> - 2017-07-14 15:10 +0200
        [PATCH v3] clk: qcom: clk-smd-rpm: Fix the reported rate of branches Georgi Djakov <georgi.djakov@linaro.org> - 2017-07-17 17:40 +0200
          Re: [PATCH v3] clk: qcom: clk-smd-rpm: Fix the reported rate of  branches Stephen Boyd <sboyd@codeaurora.org> - 2017-07-18 03:30 +0200

csiph-web