Re: [PATCH v6 0/4] Broadcom SBA RAID support

From	Anup Patel <anup.patel@broadcom.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v6 0/4] Broadcom SBA RAID support
Date	2017-03-29 08:10 +0200
Message-ID	<tqeXT-2Ou-15@gated-at.bofh.it> (permalink)
References	<thXrb-6fC-13@gated-at.bofh.it> <tnnkZ-EB-3@gated-at.bofh.it> <tnnO2-Sm-3@gated-at.bofh.it> <tno7o-1hh-9@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Tue, Mar 21, 2017 at 2:48 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Tue, Mar 21, 2017 at 02:17:21PM +0530, Anup Patel wrote:
>> On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
>> > On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
>> >> The Broadcom SBA RAID is a stream-based device which provides
>> >> RAID5/6 offload.
>> >>
>> >> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> >> ring manager) to provide ring-based programming interface. Due to
>> >> this, the Broadcom SBA RAID driver (mailbox client) implements
>> >> DMA device having one DMA channel using a set of mailbox channels
>> >> provided by Broadcom SoC specific ring manager driver (mailbox
>> >> controller).
>> >>
>> >> The Broadcom SBA RAID hardware requires PQ disk position instead
>> >> of PQ disk coefficient. To address this, we have added raid_gflog
>> >> table which will help driver to convert PQ disk coefficient to PQ
>> >> disk position.
>> >>
>> >> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> >> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>> >
>> > Okay I applied and was about to push when I noticed this :(
>> >
>> > So what is the status of this..?
>>
>> PATCH2 is Acked but PATCH1 is under-review. Currently, its
>> v6 of that patchset.
>>
>> The only dependency on that patchset is the changes in
>> brcm-message.h which are required by this BCM-SBA-RAID
>> driver.
>>
>> @Jassi,
>> Can you please have a look at PATCH v6?
>
> And I would need an immutable branch/tag once merged. I am going to keep
> this series pending till then.

The Broadcom FlexRM patchset is pickedup by Jassi and
can be found in mailbox-for-next branch of
git://git.linaro.org/landing-teams/working/fujitsu/integration

Both patchset (Broadcom FlexRM patchset and this one) are
also available in sba-raid-v7 branch of
https://github.com/Broadcom/arm64-linux.git

Regards,
Anup

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH v6 0/4] Broadcom SBA RAID support Anup Patel <anup.patel@broadcom.com> - 2017-03-29 08:10 +0200
  Re: [PATCH v6 0/4] Broadcom SBA RAID support Vinod Koul <vinod.koul@intel.com> - 2017-03-30 06:50 +0200

csiph-web