Re: [PATCH v6 0/4] Broadcom SBA RAID support

From	Vinod Koul <vinod.koul@intel.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v6 0/4] Broadcom SBA RAID support
Date	2017-03-30 06:50 +0200
Message-ID	<tqAc1-Zu-3@gated-at.bofh.it> (permalink)
References	<thXrb-6fC-13@gated-at.bofh.it> <tnnkZ-EB-3@gated-at.bofh.it> <tnnO2-Sm-3@gated-at.bofh.it> <tno7o-1hh-9@gated-at.bofh.it> <tqeXT-2Ou-15@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Wed, Mar 29, 2017 at 11:35:43AM +0530, Anup Patel wrote:
> On Tue, Mar 21, 2017 at 2:48 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> > On Tue, Mar 21, 2017 at 02:17:21PM +0530, Anup Patel wrote:
> >> On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> >> > On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
> >> >> The Broadcom SBA RAID is a stream-based device which provides
> >> >> RAID5/6 offload.
> >> >>
> >> >> It requires a SoC specific ring manager (such as Broadcom FlexRM
> >> >> ring manager) to provide ring-based programming interface. Due to
> >> >> this, the Broadcom SBA RAID driver (mailbox client) implements
> >> >> DMA device having one DMA channel using a set of mailbox channels
> >> >> provided by Broadcom SoC specific ring manager driver (mailbox
> >> >> controller).
> >> >>
> >> >> The Broadcom SBA RAID hardware requires PQ disk position instead
> >> >> of PQ disk coefficient. To address this, we have added raid_gflog
> >> >> table which will help driver to convert PQ disk coefficient to PQ
> >> >> disk position.
> >> >>
> >> >> This patchset is based on Linux-4.11-rc1 and depends on patchset
> >> >> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >> >
> >> > Okay I applied and was about to push when I noticed this :(
> >> >
> >> > So what is the status of this..?
> >>
> >> PATCH2 is Acked but PATCH1 is under-review. Currently, its
> >> v6 of that patchset.
> >>
> >> The only dependency on that patchset is the changes in
> >> brcm-message.h which are required by this BCM-SBA-RAID
> >> driver.
> >>
> >> @Jassi,
> >> Can you please have a look at PATCH v6?
> >
> > And I would need an immutable branch/tag once merged. I am going to keep
> > this series pending till then.
> 
> The Broadcom FlexRM patchset is pickedup by Jassi and
> can be found in mailbox-for-next branch of
> git://git.linaro.org/landing-teams/working/fujitsu/integration
> 
> Both patchset (Broadcom FlexRM patchset and this one) are
> also available in sba-raid-v7 branch of
> https://github.com/Broadcom/arm64-linux.git

Jassi,

Can you provide an immutable branch/tag please for this, latter is
preferred.

Btw didn't find your tree in MAINTAINERS..

> 
> Regards,
> Anup

-- 
~Vinod

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v6 0/4] Broadcom SBA RAID support Anup Patel <anup.patel@broadcom.com> - 2017-03-29 08:10 +0200
  Re: [PATCH v6 0/4] Broadcom SBA RAID support Vinod Koul <vinod.koul@intel.com> - 2017-03-30 06:50 +0200

csiph-web