Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1609001

[PATCH v2 0/2] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl setting

From Patrick Menschel <menschel.p@posteo.de>
Newsgroups linux.kernel
Subject [PATCH v2 0/2] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl setting
Date 2017-03-24 23:00 +0100
Message-ID <toFpw-7JB-1@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


The Allwinner A10/A20 SoCs have an on-board CAN (Controller Area Network)
controller. This patch adds the CAN core to the SoC's include files,
sun4i-a10.dtsi and sun7i-a20.dtsi.

On linux-can mailing list was a discussion about updating the device tree bindings
https://lkml.org/lkml/2015/9/17/220
but it did not progress past writing the documentation file.
Documentation/devicetree/bindings/net/can/sun4i_can.txt

The CAN controller can be enabled in a board specific dts file as
described in the documentation file or by using a device tree overlay.

I have tested the patch v2 on a Banana Pi (A20 SoC) with mainline kernel 4.10.5.

History:
    v2: changed can0_pins_a node contents to new generic binding method, 
	changed can0_pins_a node position by alphabetical order,
        changed can0 device node position by rising physical address order

    v1: initial

Patrick Menschel (2):
  ARM: dts: sun4i: Add CAN node and can0_pins_a pinctrl settings
  ARM: dts: sun7i: Add CAN node and can0_pins_a pinctrl settings

 arch/arm/boot/dts/sun4i-a10.dtsi | 13 +++++++++++++
 arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++
 2 files changed, 26 insertions(+)

-- 
1.9.1

Back to linux.kernel | Previous | NextNext in thread | Find similar | Unroll thread


Thread

[PATCH v2 0/2] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl setting Patrick Menschel <menschel.p@posteo.de> - 2017-03-24 23:00 +0100
  [PATCH v2 1/2] ARM: dts: sun4i: Add CAN node and can0_pins_a pinctrl settings Patrick Menschel <menschel.p@posteo.de> - 2017-03-24 23:00 +0100
  [PATCH v2 2/2] ARM: dts: sun7i: Add CAN node and can0_pins_a pinctrl settings Patrick Menschel <menschel.p@posteo.de> - 2017-03-24 23:00 +0100
    Re: [PATCH v2 2/2] ARM: dts: sun7i: Add CAN node and can0_pins_a  pinctrl settings Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-03-27 11:00 +0200

csiph-web