Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1599187

Re: [PATCH v2] extcon: int3496: Set the id pin to direction-input if necessary

Show all headers | View raw

Hi,

On 2017년 03월 13일 17:40, Hans de Goede wrote:
> With the new more strict ACPI gpio code the dsdt's IoRestriction
> flags are honored on gpiod_get, but in some dsdt's it is wrong,
> so explicitly call gpiod_direction_input on the id gpio if
> necessary.
> 
> This fixes the following errors when the int3496 code is used
> together with the new more strict ACPI gpio code:
> 
> [ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
> [ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ
> [ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio
> [ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22
> [ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22
> 
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v2:
> -Warn about firmware bug when the dsdt's IoRestriction does not allow input
> ---
>  drivers/extcon/extcon-intel-int3496.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
> index b8ac947..18801eb 100644
> --- a/drivers/extcon/extcon-intel-int3496.c
> +++ b/drivers/extcon/extcon-intel-int3496.c
> @@ -113,6 +113,10 @@ static int int3496_probe(struct platform_device *pdev)
>  		dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
>  		return ret;
>  	}

Need to add one blank line at here.

> +	if (gpiod_get_direction(data->gpio_usb_id) != GPIOF_DIR_IN) {
> +		dev_warn(dev, "firmware bug USB ID GPIO not in input mode, fixing\n");

The length of warning comment is over 80 char.
We need to reduce the length of comment.

I modify the comment as following: If you ok, I'll apply it. 
	"ID pin isn't in input mode due to firmware bug"

Or if you make new comment under 80 char, please send v3 patch.

> +		gpiod_direction_input(data->gpio_usb_id);
> +	}
>  
>  	data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
>  	if (data->usb_id_irq < 0) {
> 

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2] extcon: int3496: Set the id pin to direction-input if necessary Hans de Goede <hdegoede@redhat.com> - 2017-03-13 10:30 +0100
  Re: [PATCH v2] extcon: int3496: Set the id pin to direction-input if  necessary Chanwoo Choi <cw00.choi@samsung.com> - 2017-03-13 11:40 +0100
    Re: [PATCH v2] extcon: int3496: Set the id pin to direction-input if  necessary Hans de Goede <hdegoede@redhat.com> - 2017-03-13 12:00 +0100
      Re: [PATCH v2] extcon: int3496: Set the id pin to direction-input if  necessary Chanwoo Choi <cw00.choi@samsung.com> - 2017-03-13 12:10 +0100
  Re: [PATCH v2] extcon: int3496: Set the id pin to direction-input if necessary Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-03-13 12:20 +0100

csiph-web