Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1585496

Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G

Show key headers only | View raw

On Tue, Feb 21, 2017 at 02:55:02PM +0800, Chunyan Zhang wrote:
> From: Orson Zhai <orson.zhai@spreadtrum.com>

Hello Chunyan,

> 
> SC9860G is a 8 cores of A53 SoC with 4G LTE support SoC from Spreadtrum.
> 
> According to regular hierarchy of sprd dts, whale2.dtsi contains SoC
> peripherals IP nodes, sc9860.dtsi contains stuff related to ARM core stuff
> and sp9860g dts is for the board level.
> 
> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
> ---
>  arch/arm64/boot/dts/sprd/Makefile         |   3 +-
>  arch/arm64/boot/dts/sprd/sc9860.dtsi      | 531 ++++++++++++++++++++++++++++++
>  arch/arm64/boot/dts/sprd/sp9860g-1h10.dts |  56 ++++
>  arch/arm64/boot/dts/sprd/whale2.dtsi      |  70 ++++
>  4 files changed, 659 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi
>  create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
>  create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsi
> 
> diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
> index b658c5e..f0535e6 100644
> --- a/arch/arm64/boot/dts/sprd/Makefile
> +++ b/arch/arm64/boot/dts/sprd/Makefile
> @@ -1,4 +1,5 @@
> -dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb
> +dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
> +			sp9860g-1h10.dtb
>  
>  always		:= $(dtb-y)
>  subdir-y	:= $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> new file mode 100644
> index 0000000..73deb4e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> @@ -0,0 +1,531 @@
> +/*
> + * Spreadtrum SP9860 SoC DTS file
> + *
> + * Copyright (C) 2016, Spreadtrum Communications Inc.
> + *
> + * This file is licensed under a dual GPLv2 or X11 license.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "whale2.dtsi"
> +
> +/ {
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&CPU4>;
> +				};
> +				core1 {
> +					cpu = <&CPU5>;
> +				};
> +				core2 {
> +					cpu = <&CPU6>;
> +				};
> +				core3 {
> +					cpu = <&CPU7>;
> +				};
> +			};
> +		};
> +
> +		CPU0: cpu@530000 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x530000>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> +		};
> +
> +		CPU1: cpu@530001 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x530001>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> +		};
> +
> +		CPU2: cpu@530002 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x530002>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> +		};
> +
> +		CPU3: cpu@530003 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x530003>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> +		};
> +
> +		CPU4: cpu@530100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x530100>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> +		};
> +
> +		CPU5: cpu@530101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x530101>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> +		};
> +
> +		CPU6: cpu@530102 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x530102>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> +		};
> +
> +		CPU7: cpu@530103 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53", "arm,armv8";
> +			reg = <0x0 0x530103>;
> +			enable-method = "psci";
> +			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> +		};
> +	};
> +
> +	idle-states{
> +		entry-method = "arm,psci";
> +
> +		CORE_PD: core_pd {
> +			compatible = "arm,idle-state";
> +			entry-latency-us = <1000>;
> +			exit-latency-us = <700>;
> +			min-residency-us = <2500>;
> +			local-timer-stop;
> +			arm,psci-suspend-param = <0x00010002>;
> +		};
> +
> +		CLUSTER_PD: cluster_pd {
> +			compatible = "arm,idle-state";
> +			entry-latency-us = <1000>;
> +			exit-latency-us = <1000>;
> +			min-residency-us = <3000>;
> +			local-timer-stop;
> +			arm,psci-suspend-param = <0x01010003>;
> +		};
> +	};
> +
> +	gic: interrupt-controller@12001000 {
> +		compatible = "arm,gic-400";
> +		reg = <0 0x12001000 0 0x1000>,
> +		      <0 0x12002000 0 0x2000>,
> +		      <0 0x12004000 0 0x2000>,
> +		      <0 0x12006000 0 0x2000>;
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
> +					| IRQ_TYPE_LEVEL_HIGH)>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-0.2";
> +		method = "smc";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
> +					 | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
> +					 | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
> +					 | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
> +					 | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
> +		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&CPU0>,
> +				     <&CPU1>,
> +				     <&CPU2>,
> +				     <&CPU3>,
> +				     <&CPU4>,
> +				     <&CPU5>,
> +				     <&CPU6>,
> +				     <&CPU7>;
> +	};
> +
> +	soc {
> +		soc_funnel: funnel@10001000 {

There is no need for a label ("soc_funnel) before the device name if that
device is not referenced elsewhere in the DTS.  The same comment applies to most
of the component listed below.

> +			compatible = "arm,coresight-funnel", "arm,primecell";
> +			reg = <0 0x10001000 0 0x1000>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					soc_funnel_out_port: endpoint {
> +						remote-endpoint = <&etb_in>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <0>;
> +					soc_funnel_in_port: endpoint {
> +						slave-mode;
> +						remote-endpoint =
> +						<&main_funnel_out_port>;
> +					};
> +				};
> +			};
> +		};
> +
> +		etb@10003000 {
> +			compatible = "arm,coresight-tmc", "arm,primecell";
> +			reg = <0 0x10003000 0 0x1000>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +			port {
> +				etb_in: endpoint {
> +					slave-mode;
> +					remote-endpoint =
> +						<&soc_funnel_out_port>;
> +				};
> +			};
> +		};
> +
> +		cluster0_funnel: funnel@11001000 {
> +			compatible = "arm,coresight-funnel", "arm,primecell";
> +			reg = <0 0x11001000 0 0x1000>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					cluster0_funnel_out_port: endpoint {
> +						remote-endpoint =
> +							<&cluster0_etf_in>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <0>;
> +					cluster0_funnel_in_port0: endpoint {
> +						slave-mode;
> +						remote-endpoint = <&etm0_out>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <1>;
> +					cluster0_funnel_in_port1: endpoint {
> +						slave-mode;
> +						remote-endpoint = <&etm1_out>;
> +					};
> +				};
> +
> +				port@3 {
> +					reg = <2>;
> +					cluster0_funnel_in_port2: endpoint {
> +						slave-mode;
> +						remote-endpoint = <&etm2_out>;
> +					};
> +				};
> +
> +				port@4 {
> +					reg = <4>;
> +					cluster0_funnel_in_port3: endpoint {
> +						slave-mode;
> +						remote-endpoint = <&etm3_out>;
> +					};
> +				};
> +			};
> +		};
> +
> +		cluster1_funnel: funnel@11002000 {
> +			compatible = "arm,coresight-funnel", "arm,primecell";
> +			reg = <0 0x11002000 0 0x1000>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					cluster1_funnel_out_port: endpoint {
> +						remote-endpoint =
> +							<&cluster1_etf_in>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <0>;
> +					cluster1_funnel_in_port0: endpoint {
> +						slave-mode;
> +						remote-endpoint = <&etm4_out>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <1>;
> +					cluster1_funnel_in_port1: endpoint {
> +						slave-mode;
> +						remote-endpoint = <&etm5_out>;
> +					};
> +				};
> +
> +				port@3 {
> +					reg = <2>;
> +					cluster1_funnel_in_port2: endpoint {
> +						slave-mode;
> +						remote-endpoint = <&etm6_out>;
> +					};
> +				};
> +
> +				port@4 {
> +					reg = <3>;
> +					cluster1_funnel_in_port3: endpoint {
> +						slave-mode;
> +						remote-endpoint = <&etm7_out>;
> +					};
> +				};
> +			};
> +		};
> +
> +		cluster0_etf: etf@11003000 {
> +			compatible = "arm,coresight-tmc", "arm,primecell";
> +			reg = <0 0x11003000 0 0x1000>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port@0 {
> +				cluster0_etf_out: endpoint {
> +					remote-endpoint =
> +						<&main_funnel_in_port0>;
> +				};
> +			};
> +
> +			port@1 {
> +				cluster0_etf_in: endpoint {
> +					slave-mode;
> +					remote-endpoint =
> +						<&cluster0_funnel_out_port>;
> +				};
> +			};
> +		};
> +
> +		cluster1_etf: etf@11004000 {
> +			compatible = "arm,coresight-tmc", "arm,primecell";
> +			reg = <0 0x11004000 0 0x1000>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port@0 {
> +				cluster1_etf_out: endpoint {
> +					remote-endpoint =
> +						<&main_funnel_in_port1>;
> +				};
> +			};
> +
> +			port@1 {
> +				cluster1_etf_in: endpoint {
> +					slave-mode;
> +					remote-endpoint =
> +						<&cluster1_funnel_out_port>;
> +				};
> +			};
> +		};

When more than one port is present it is customary to add another level of
imbrication like it is done for funnels above:
                         "ports {"
                                port@0 {
                                ...
                                port@1 {
                                ...
                        }

The same comment applies to both etf. 

> +
> +		main_funnel: funnel@11005000 {
> +			compatible = "arm,coresight-funnel", "arm,primecell";
> +			reg = <0 0x11005000 0 0x1000>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					main_funnel_out_port: endpoint {
> +						remote-endpoint =
> +							<&soc_funnel_in_port>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <0>;
> +					main_funnel_in_port0: endpoint {
> +						slave-mode;
> +						remote-endpoint =
> +							<&cluster0_etf_out>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <1>;
> +					main_funnel_in_port1: endpoint {
> +						slave-mode;
> +						remote-endpoint =
> +							<&cluster1_etf_out>;
> +					};
> +				};
> +			};
> +		};
> +
> +		etm@11440000 {
> +			compatible = "arm,coresight-etm4x", "arm,primecell";
> +			reg = <0 0x11440000 0 0x1000>;
> +			cpu = <&CPU0>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port {
> +				etm0_out: endpoint {
> +					remote-endpoint =
> +						<&cluster0_funnel_in_port0>;
> +				};
> +			};
> +		};
> +
> +		etm@11540000 {
> +			compatible = "arm,coresight-etm4x", "arm,primecell";
> +			reg = <0 0x11540000 0 0x1000>;
> +			cpu = <&CPU1>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port {
> +				etm1_out: endpoint {
> +					remote-endpoint =
> +						<&cluster0_funnel_in_port1>;
> +				};
> +			};
> +		};
> +
> +		etm@11640000 {
> +			compatible = "arm,coresight-etm4x", "arm,primecell";
> +			reg = <0 0x11640000 0 0x1000>;
> +			cpu = <&CPU2>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port {
> +				etm2_out: endpoint {
> +					remote-endpoint =
> +						<&cluster0_funnel_in_port2>;
> +				};
> +			};
> +		};
> +
> +		etm@11740000 {
> +			compatible = "arm,coresight-etm4x", "arm,primecell";
> +			reg = <0 0x11740000 0 0x1000>;
> +			cpu = <&CPU3>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port {
> +				etm3_out: endpoint {
> +					remote-endpoint =
> +						<&cluster0_funnel_in_port3>;
> +				};
> +			};
> +		};
> +
> +		etm@11840000 {
> +			compatible = "arm,coresight-etm4x", "arm,primecell";
> +			reg = <0 0x11840000 0 0x1000>;
> +			cpu = <&CPU4>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port {
> +				etm4_out: endpoint {
> +					remote-endpoint =
> +						<&cluster1_funnel_in_port0>;
> +				};
> +			};
> +		};
> +
> +		etm@11940000 {
> +			compatible = "arm,coresight-etm4x", "arm,primecell";
> +			reg = <0 0x11940000 0 0x1000>;
> +			cpu = <&CPU5>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port {
> +				etm5_out: endpoint {
> +					remote-endpoint =
> +						<&cluster1_funnel_in_port1>;
> +				};
> +			};
> +		};
> +
> +		etm@11a40000 {
> +			compatible = "arm,coresight-etm4x", "arm,primecell";
> +			reg = <0 0x11a40000 0 0x1000>;
> +			cpu = <&CPU6>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port {
> +				etm6_out: endpoint {
> +					remote-endpoint =
> +						<&cluster1_funnel_in_port2>;
> +				};
> +			};
> +		};
> +
> +		etm@11b40000 {
> +			compatible = "arm,coresight-etm4x", "arm,primecell";
> +			reg = <0 0x11b40000 0 0x1000>;
> +			cpu = <&CPU7>;
> +			clocks = <&ext_26m>;
> +			clock-names = "apb_pclk";
> +
> +			port {
> +				etm7_out: endpoint {
> +					remote-endpoint =
> +						<&cluster1_funnel_in_port3>;
> +				};
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
> new file mode 100644
> index 0000000..5faa452
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
> @@ -0,0 +1,56 @@
> +/*
> + * Spreadtrum SP9860g board DTS file
> + *
> + * Copyright (C) 2017, Spreadtrum Communications Inc.
> + *
> + * This file is licensed under a dual GPLv2 or X11 license.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc9860.dtsi"
> +
> +/ {
> +	model = "Spreadtrum SP9860G 3GFHD Board";
> +
> +	compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
> +
> +	aliases {
> +		serial0 = &uart0; /* for Bluetooth */
> +		serial1 = &uart1; /* UART console */
> +		serial2 = &uart2; /* Reserved */
> +		serial3 = &uart3; /* for GPS */
> +	};
> +
> +	memory{
> +		device_type = "memory";
> +		reg = <0x0 0x80000000 0 0x60000000>,
> +		      <0x1 0x80000000 0 0x60000000>;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial1:115200n8";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
> new file mode 100644
> index 0000000..64f06d9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
> @@ -0,0 +1,70 @@
> +/*
> + * Spreadtrum Whale2 SoC platform peripherals DTS file
> + *
> + * Copyright (C) 2016, Spreadtrum Communications Inc.
> + *
> + * This file is licensed under a dual GPLv2 or X11 license.
> + */
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		ap-apb {
> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0x0 0x70000000 0x10000000>;
> +
> +			uart0: serial@70000000 {
> +				compatible = "sprd,sc9838-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x000000 0x100>;
> +				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +
> +			uart1: serial@70100000 {
> +				compatible = "sprd,sc9838-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x100000 0x100>;
> +				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +
> +			uart2: serial@70200000 {
> +				compatible = "sprd,sc9838-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x200000 0x100>;
> +				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +
> +			uart3: serial@70300000 {
> +				compatible = "sprd,sc9838-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x300000 0x100>;
> +				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		ext_26m: ext-26m {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <26000000>;
> +			clock-output-names = "ext_26m";
> +		};
> +	};
> +};
> -- 
> 2.7.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH V2 0/3] Add Spreadtrum SP9860G support Chunyan Zhang <chunyan.zhang@spreadtrum.com> - 2017-02-21 08:10 +0100
  [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G Chunyan Zhang <chunyan.zhang@spreadtrum.com> - 2017-02-21 08:10 +0100
    Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's  SP9860G Sudeep Holla <sudeep.holla@arm.com> - 2017-02-21 12:00 +0100
    Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's  SP9860G Mathieu Poirier <mathieu.poirier@linaro.org> - 2017-02-21 17:30 +0100
      Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's  SP9860G Chunyan Zhang <chunyan.zhang@spreadtrum.com> - 2017-02-22 05:00 +0100
        Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G Mathieu Poirier <mathieu.poirier@linaro.org> - 2017-02-22 17:20 +0100
          Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G Chunyan Zhang <zhang.lyra@gmail.com> - 2017-02-23 07:30 +0100
            Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's  SP9860G Sudeep Holla <sudeep.holla@arm.com> - 2017-02-23 12:10 +0100
    Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G Rob Herring <robh+dt@kernel.org> - 2017-02-24 01:10 +0100
      Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's  SP9860G Chunyan Zhang <chunyan.zhang@spreadtrum.com> - 2017-02-24 09:10 +0100
        Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G Rob Herring <robh+dt@kernel.org> - 2017-02-24 16:10 +0100
          Re: [PATCH V2 1/3] arm64: dts: Add basic DT to support Spreadtrum's SP9860G Chunyan Zhang <zhang.lyra@gmail.com> - 2017-02-28 08:20 +0100

csiph-web