Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1584058
| From | Andreas Färber <afaerber@suse.de> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement |
| Date | 2017-02-19 04:30 +0100 |
| Message-ID | <tcqmd-296-1@gated-at.bofh.it> (permalink) |
| Organization | linux.* mail to news gateway |
Hello, This mini-series adds initial support for the Marvell IAP140 SoC (aka PXA1908) and the Andromeda Box Edge development board. In order to enable the 8250 UART driver, it reuses ARCH_PXA; but some drivers enabled with ARCH_PXA don't build due to arm assembly or arm64's lack of mach-, so their dependencies need to be limited to ARM alongside (blacklisted). The alternative would of course be to choose a new ARCH_ symbol and to selectively add it to drivers known working (whitelisting). The latter would require finding a suitable name. Both earlycon and serial are working, but an explicit console=ttyS0,115200n8 is needed; with just "earlycon" and stdout-path the earlycon stops early and switches to a tty0, long before disabling the bootconsole... All four CPUs come up, and an initrd can be reached. However, there are errors about CPUs 1-3 having a zero SYS_CNTFRQ_EL0: [ 0.095812] smp: Bringing up secondary CPUs ... ======pxa1908_pmu_core_pwr_on: mpidr = 0x1 ======pxa1908_pmu_core_pwr_on: mpidr = 0x2 ======pxa1908_pmu_core_pwr_on: mpidr = 0x3 [ 0.133419] Detected VIPT I-cache on CPU1 [ 0.133430] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000 [ 0.133447] Unsupported CPU feature variation. ... [ 0.133748] CPU1: Booted secondary processor [410fd032] [ 0.165465] Detected VIPT I-cache on CPU2 [ 0.165474] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000 [ 0.165505] CPU2: Booted secondary processor [410fd032] [ 0.197539] Detected VIPT I-cache on CPU3 [ 0.197546] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000 [ 0.197573] CPU3: Booted secondary processor [410fd032] [ 0.197625] smp: Brought up 1 node, 4 CPUs [ 0.522514] SMP: Total of 4 processors activated. [ 0.527212] CPU features: detected feature: 32-bit EL0 Support [ 0.533105] CPU: All CPU(s) started at EL2 KVM appears to initialize okay, but was not yet tested with guests. [ 0.865255] kvm [1]: 8-bit VMID [ 0.868401] kvm [1]: IDMAP page: d23000 [ 0.872233] kvm [1]: HYP VA range: 800000000000:ffffffffffff [ 0.878262] kvm [1]: Hyp mode initialized successfully [ 0.883429] kvm [1]: vgic-v2@d1dfc000 [ 0.887179] kvm [1]: vgic interrupt IRQ1 [ 0.891120] kvm [1]: virtual timer IRQ4 More Marvell drivers may be available in-tree for reuse - besides build errors the limitation is currently the lack of an IAP140 clk driver though. Patch 4/4 works around that for UART0 with a fixed-clock. A 3.14 based tree is available on GitHub acorn-marvell/brillo_pxa_kernel. No driver comparisons to mainline have been attempted yet. Booting required changes to the vendor U-Boot, cf. https://en.opensuse.org/HCL:AndromedaBoxEdge https://github.com/afaerber/linux/commits/edge-next Have a lot of fun! Cheers, Andreas Cc: info@andromedabox.org Cc: devicetree@vger.kernel.org Andreas Färber (4): ARM64: Prepare Marvell IAP140 aka PXA1908 Documentation: devicetree: arm: Document Marvell IAP140 ARM64: dts: marvell: Add IAP140 and Andromeda Box Edge ARM64: dts: marvell: iap140-andromeda-box-edge: Add uart0 clock .../devicetree/bindings/arm/marvell/iap140.txt | 7 + arch/arm64/Kconfig.platforms | 5 + arch/arm64/boot/dts/marvell/Makefile | 2 + .../boot/dts/marvell/iap140-andromeda-box-edge.dts | 77 ++++++++ arch/arm64/boot/dts/marvell/iap140.dtsi | 195 +++++++++++++++++++++ drivers/clk/Kconfig | 2 +- drivers/mmc/host/Kconfig | 2 +- drivers/tty/serial/Kconfig | 2 +- 8 files changed, 289 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/marvell/iap140.txt create mode 100644 arch/arm64/boot/dts/marvell/iap140-andromeda-box-edge.dts create mode 100644 arch/arm64/boot/dts/marvell/iap140.dtsi -- 2.10.2
Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread
[PATCH 0/4] ARM64: Initial Marvell IAP140 enablement Andreas Färber <afaerber@suse.de> - 2017-02-19 04:30 +0100
[PATCH 1/4] ARM64: Prepare Marvell IAP140 aka PXA1908 Andreas Färber <afaerber@suse.de> - 2017-02-19 04:30 +0100
[PATCH 4/4] ARM64: dts: marvell: iap140-andromeda-box-edge: Add uart0 clock Andreas Färber <afaerber@suse.de> - 2017-02-19 04:30 +0100
Re: [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement Gregory CLEMENT <gregory.clement@free-electrons.com> - 2017-02-20 14:20 +0100
Re: [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement Andreas Färber <afaerber@suse.de> - 2017-02-21 19:30 +0100
Re: [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement Andrew Lunn <andrew@lunn.ch> - 2017-02-21 20:30 +0100
Re: [PATCH 0/4] ARM64: Initial Marvell IAP140 enablement Robert Jarzmik <robert.jarzmik@free.fr> - 2017-02-21 23:30 +0100
csiph-web