Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1676048

Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller Version 2

Show all headers | View raw

On 06/27/2017 07:18 PM, matthew.gerlach@linux.intel.com wrote:
> 
> 
> On Tue, 27 Jun 2017, Marek Vasut wrote:
> 
>> On 06/27/2017 05:57 PM, matthew.gerlach@linux.intel.com wrote:
>>>
>>>
>>> On Tue, 27 Jun 2017, Marek Vasut wrote:
>>>
>>>> On 06/27/2017 04:32 PM, matthew.gerlach@linux.intel.com wrote:
>>>>>
>>>>>
>>>>> On Tue, 27 Jun 2017, Marek Vasut wrote:
>>>>>
>>>>> Hi Marek,
>>>>>
>>>>> Thanks for the feedback.  See my comments below.
>>>>>
>>>>> Matthew Gerlach
>>>>>
>>>>>> On 06/26/2017 06:13 PM, matthew.gerlach@linux.intel.com wrote:
>>>>>>> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>>>>>>>
>>>>>>> Device Tree bindings for Version 2 of the Altera Quadspi Controller
>>>>>>> that can be optionally paired with a windowed bridge.
>>>>>>>
>>>>>>> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>>>>>>> ---
>>>>>>>  .../devicetree/bindings/mtd/altera-quadspi-v2.txt  | 37
>>>>>>> ++++++++++++++++++++++
>>>>>>>  1 file changed, 37 insertions(+)
>>>>>>>  create mode 100644
>>>>>>> Documentation/devicetree/bindings/mtd/altera-quadspi-v2.txt
>>>>>>>
>>>>>>> diff --git
>>>>>>> a/Documentation/devicetree/bindings/mtd/altera-quadspi-v2.txt
>>>>>>> b/Documentation/devicetree/bindings/mtd/altera-quadspi-v2.txt
>>>>>>> new file mode 100644
>>>>>>> index 0000000..8ba63d7
>>>>>>> --- /dev/null
>>>>>>> +++ b/Documentation/devicetree/bindings/mtd/altera-quadspi-v2.txt
>>>>>>> @@ -0,0 +1,37 @@
>>>>>>> +* Altera Quad SPI Controller Version 2
>>>>>>> +
>>>>>>> +Required properties:
>>>>>>> +- compatible : Should be "altr,quadspi-v2".
>>>>>>> +- reg : Contains at least two entries, and possibly three entries,
>>>>>>> each of
>>>>>>> +    which is a tuple consisting of a physical address and length.
>>>>>>> +- reg-names : Should contain the names "avl_csr" and "avl_mem"
>>>>>>> corresponding
>>>>>>> +          to the control and status registers and qspi memory,
>>>>>>> respectively.
>>>>>>> +
>>>>>>> +
>>>>>>> +The Altera Quad SPI Controller Version 2 can be paired with a
>>>>>>> windowed bridge
>>>>>>> +in order to reduce the footprint of the memory interface.  When a
>>>>>>> windowed
>>>>>>> +bridge is used, reads and writes of data must be 32 bits wide.
>>>>>>> +
>>>>>>> +Optional properties:
>>>>>>> +- reg-names : Should contain the name "avl_window", if the windowed
>>>>>>> bridge
>>>>>>> +          is used.  This name corresponds to the register space
>>>>>>> that
>>>>>>> +          controls the window.
>>>>>>> +- window-size : The size of the window which must be an even power
>>>>>>> of 2.
>>>>>>> +- read-bit-reverse : A boolean indicating the data read from the
>>>>>>> flash should
>>>>>>> +             be bit reversed on a byte by byte basis before being
>>>>>>> +             delivered to the MTD layer.
>>>>>>> +- write-bit-reverse : A boolean indicating the data written to the
>>>>>>> flash should
>>>>>>> +              be bit reversed on a byte by byte basis.
>>>>>>
>>>>>> Is there ever a usecase where you need to set just one of these
>>>>>> props ?
>>>>>> Also, they're altera specific, so altr, prefix should be added.
>>>>>
>>>>> In general, I think if bit reversal is required, it would be
>>>>> required in
>>>>> both directions.  However, anything is possible when using FPGAs.  So
>>>>> I thought separate booleans would be future proofing the bindings.
>>>>
>>>> Maybe we should drop this whole thing and add it when this is actually
>>>> required.
>>>>
>>>> Are there any users of this in the wild currently ?
>>>>
>>>> What is the purpose of doing this per-byte bit reverse instead of
>>>> storing th bits in the original order ?
>>>
>>> Hi Marek,
>>>
>>> Yes, there is hardware that has been in the wild for years that needs
>>> this bit reversal.  The specific use case is when a flash chip is
>>> connected to
>>> a FPGA, and the contents of the flash is used to configure the FPGA on
>>> power up.  In this use case, there is no processor involved with
>>> configuring the FPGA.  I am most familiar with this feature/bug with
>>> Altera FPGAs, but I believe this issue exists with other programmable
>>> devices.
>>
>> So the EPCQ/EPCS flash stores the bitstream in reverse or something ?
>> What are you storing in that flash except for the bitstream, filesystem?
>> Feel free to go into details, I believe it'd be useful to know exactly
>> what the problem is you're trying to solve here.
> 
> Hi Marek,
> 
> I am trying to write an MTD/spi-nor driver for version 2 of the
> Altera Quadspi contoller.  This controller is soft IP that is deployed
> in a FPGA.  As such, this component/driver can be used in wide range of
> use cases.  The controller could be used to update EPCQ/EPCS flash
> stores containing bit streams, but this component could be used for
> flash for filesystems or any non-volatile data store.  My hope is that
> all possible use cases should be covered by this driver.

How does this particular case where you have to reverse the bits look like ?

>>>>> Thinking about this binding more, I wonder if the binding name(s)
>>>>> should be (read|write)-bit8-reverse to indicate reversings the bits
>>>>> in a byte as opposed to reversing the bits in a 32 bit word?
>>>>>
>>>>> I don't think bit reversal is specific to Altera/Intel components.
>>>>> I see
>>>>> a nand driver performing bit reversal, and I think I've recently seen
>>>>> other FPGA based drivers requiring bit reversal.
>>>>
>>>> $ git grep bit.reverse Documentation/devicetree/ | wc -l
>>>> 0
>>>>
>>>> So we don't have such a generic binding . It's up to Rob (I guess) to
>>>> decide whether this is SoC specific and should've altr, prefix or not.
>>>> IMO it is.
>>>
>>> I agree there is no generic binding at this time, and I look forward
>>> to any input from Rob and anyone else on this issue.  I think it is
>>> worth pointing out that this really isn't an issue of an SoC, but rather
>>> it is an
>>> issue of how data in the flash chip is accessed.I think what makes
>>> this issue
>>> "weird" is that we have different hardware accessing the data in the
>>> flash with a different perspective.  The FPGA looks at the data from one
>>> perspective on power up, and a processor trying to update the flash has
>>> a different perspective.
>>
>> Another thing I'd ask here is, is that bit-reverse a hardware property
>> or is that some software configuration thing ?
> 
> I would say the bit reversal is a property of the FPGA that is reading
> the flash at power up.

So it's not a property of the block, but rather of the bus somewhere ?

-- 
Best regards,
Marek Vasut

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/3] Altera Quadspi Controller Version 2 matthew.gerlach@linux.intel.com - 2017-06-26 18:20 +0200
  [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller Version 2 matthew.gerlach@linux.intel.com - 2017-06-26 18:20 +0200
    Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Marek Vasut <marek.vasut@gmail.com> - 2017-06-27 12:30 +0200
      Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 matthew.gerlach@linux.intel.com - 2017-06-27 16:40 +0200
        Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Marek Vasut <marek.vasut@gmail.com> - 2017-06-27 17:20 +0200
          Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 matthew.gerlach@linux.intel.com - 2017-06-27 18:00 +0200
            Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Marek Vasut <marek.vasut@gmail.com> - 2017-06-27 18:30 +0200
              Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 matthew.gerlach@linux.intel.com - 2017-06-27 19:20 +0200
                Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Marek Vasut <marek.vasut@gmail.com> - 2017-06-27 20:00 +0200
                Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 matthew.gerlach@linux.intel.com - 2017-06-27 21:40 +0200
                Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Marek Vasut <marek.vasut@gmail.com> - 2017-06-27 22:00 +0200
            Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Rob Herring <robh@kernel.org> - 2017-06-29 01:10 +0200
              Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Marek Vasut <marek.vasut@gmail.com> - 2017-06-29 11:50 +0200
                Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 matthew.gerlach@linux.intel.com - 2017-06-29 17:10 +0200
                Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Marek Vasut <marek.vasut@gmail.com> - 2017-06-29 17:40 +0200
    Re: [PATCH 1/3] ARM: dts: Bindings for Altera Quadspi Controller  Version 2 Rob Herring <robh@kernel.org> - 2017-06-29 01:20 +0200
  [PATCH 3/3] mtd: spi-nor: Altera Quadspi Flash Controller v2 Platform driver matthew.gerlach@linux.intel.com - 2017-06-26 18:20 +0200
    Re: [PATCH 3/3] mtd: spi-nor: Altera Quadspi Flash Controller v2  Platform driver Marek Vasut <marek.vasut@gmail.com> - 2017-06-27 12:30 +0200
      Re: [PATCH 3/3] mtd: spi-nor: Altera Quadspi Flash Controller v2  Platform driver matthew.gerlach@linux.intel.com - 2017-06-27 17:40 +0200
        Re: [PATCH 3/3] mtd: spi-nor: Altera Quadspi Flash Controller v2  Platform driver Marek Vasut <marek.vasut@gmail.com> - 2017-06-27 18:30 +0200
          Re: [PATCH 3/3] mtd: spi-nor: Altera Quadspi Flash Controller v2  Platform driver matthew.gerlach@linux.intel.com - 2017-06-27 19:40 +0200
    Re: [PATCH 3/3] mtd: spi-nor: Altera Quadspi Flash Controller v2  Platform driver kbuild test robot <lkp@intel.com> - 2017-06-27 13:00 +0200

csiph-web