Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1655731
| Path | csiph.com!news.redatomik.org!aioe.org!bofh.it!news.nic.it!robomod |
|---|---|
| From | Heiko Stuebner <heiko@sntech.de> |
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 1/2] ARM: dts: rockchip: add usb nodes on rk322x |
| Date | Thu, 01 Jun 2017 22:30:02 +0200 |
| Message-ID | <tNETf-7v6-1@gated-at.bofh.it> (permalink) |
| References | <tN0Ct-6qZ-1@gated-at.bofh.it> <tN0Ct-6qZ-5@gated-at.bofh.it> |
| User-Agent | KMail/5.2.3 (Linux/4.9.0-2-amd64; KDE/5.28.0; x86_64; ; ) |
| MIME-Version | 1.0 |
| Content-Transfer-Encoding | 7Bit |
| Content-Type | text/plain; charset="us-ascii" |
| Sender | robomod@news.nic.it |
| List-ID | <linux-kernel.vger.kernel.org> |
| X-Mailing-List | linux-kernel@vger.kernel.org |
| Approved | robomod@news.nic.it |
| Lines | 186 |
| Organization | linux.* mail to news gateway |
| X-Original-Cc | robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, frank.wang@rock-chips.com, huangtao@rock-chips.com, daniel.meng@rock-chips.com |
| X-Original-Date | Thu, 01 Jun 2017 22:22:17 +0200 |
| X-Original-Message-ID | <1657625.AqxPQItbmB@phil> |
| X-Original-References | <1496193684-30449-1-git-send-email-william.wu@rock-chips.com> <1496193684-30449-2-git-send-email-william.wu@rock-chips.com> |
| X-Original-Sender | linux-kernel-owner@vger.kernel.org |
| Xref | csiph.com linux.kernel:1655731 |
Show key headers only | View raw
Hi William,
Am Mittwoch, 31. Mai 2017, 09:21:23 CEST schrieb William Wu:
> This patch adds usb otg/host controllers and phys nodes on rk322x.
>
> Signed-off-by: William Wu <william.wu@rock-chips.com>
> ---
> arch/arm/boot/dts/rk322x.dtsi | 138 +++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 137 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
> index df57413..d4bfd3c 100644
> --- a/arch/arm/boot/dts/rk322x.dtsi
> +++ b/arch/arm/boot/dts/rk322x.dtsi
> @@ -210,8 +210,61 @@
> };
>
> grf: syscon@11000000 {
> - compatible = "syscon";
> + compatible = "syscon", "simple-mfd";
> reg = <0x11000000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + u2phy0: usb2-phy@760 {
> + compatible = "rockchip,rk322x-usb2phy";
as commented on the driver-side some moments ago, compatibles should not
contain wildcards, so please make this
"rockchip,rk3228-usb2phy"
instead.
Same below and also for the dwc2 node.
Thanks
Heiko
> + reg = <0x0760 0x0c>;
> + clocks = <&cru SCLK_OTGPHY0>;
> + clock-names = "phyclk";
> + #clock-cells = <0>;
> + clock-output-names = "usb480m_phy0";
> + status = "disabled";
> +
> + u2phy0_otg: otg-port {
> + #phy-cells = <0>;
> + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "otg-bvalid", "otg-id",
> + "linestate";
> + status = "disabled";
> + };
> +
> + u2phy0_host: host-port {
> + #phy-cells = <0>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "linestate";
> + status = "disabled";
> + };
> + };
> +
> + u2phy1: usb2-phy@800 {
> + compatible = "rockchip,rk322x-usb2phy";
rockchip,rk3228-usb2phy
> + reg = <0x0800 0x0c>;
> + clocks = <&cru SCLK_OTGPHY1>;
> + clock-names = "phyclk";
> + #clock-cells = <0>;
> + clock-output-names = "usb480m_phy1";
> + status = "disabled";
> +
> + u2phy1_otg: otg-port {
> + #phy-cells = <0>;
> + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "linestate";
> + status = "disabled";
> + };
> +
> + u2phy1_host: host-port {
> + #phy-cells = <0>;
> + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "linestate";
> + status = "disabled";
> + };
> + };
> };
>
> uart0: serial@11010000 {
> @@ -467,6 +520,89 @@
> status = "disabled";
> };
>
> + usb_otg: usb@30040000 {
> + compatible = "rockchip,rk322x-usb", "rockchip,rk3066-usb",
rockchip,rk3228-usb
> + "snps,dwc2";
> + reg = <0x30040000 0x40000>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_OTG>;
> + clock-names = "otg";
> + dr_mode = "otg";
> + g-np-tx-fifo-size = <16>;
> + g-rx-fifo-size = <280>;
> + g-tx-fifo-size = <256 128 128 64 32 16>;
> + g-use-dma;
> + phys = <&u2phy0_otg>;
> + phy-names = "usb2-phy";
> + status = "disabled";
> + };
> +
> + usb_host0_ehci: usb@30080000 {
> + compatible = "generic-ehci";
> + reg = <0x30080000 0x20000>;
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_HOST0>, <&u2phy0>;
> + clock-names = "usbhost", "utmi";
> + phys = <&u2phy0_host>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + usb_host0_ohci: usb@300a0000 {
> + compatible = "generic-ohci";
> + reg = <0x300a0000 0x20000>;
> + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_HOST0>, <&u2phy0>;
> + clock-names = "usbhost", "utmi";
> + phys = <&u2phy0_host>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + usb_host1_ehci: usb@300c0000 {
> + compatible = "generic-ehci";
> + reg = <0x300c0000 0x20000>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_HOST1>, <&u2phy1>;
> + clock-names = "usbhost", "utmi";
> + phys = <&u2phy1_otg>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + usb_host1_ohci: usb@300e0000 {
> + compatible = "generic-ohci";
> + reg = <0x300e0000 0x20000>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_HOST1>, <&u2phy1>;
> + clock-names = "usbhost", "utmi";
> + phys = <&u2phy1_otg>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + usb_host2_ehci: usb@30100000 {
> + compatible = "generic-ehci";
> + reg = <0x30100000 0x20000>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_HOST2>, <&u2phy1>;
> + phys = <&u2phy1_host>;
> + phy-names = "usb";
> + clock-names = "usbhost", "utmi";
> + status = "disabled";
> + };
> +
> + usb_host2_ohci: usb@30120000 {
> + compatible = "generic-ohci";
> + reg = <0x30120000 0x20000>;
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru HCLK_HOST2>, <&u2phy1>;
> + clock-names = "usbhost", "utmi";
> + phys = <&u2phy1_host>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> gmac: ethernet@30200000 {
> compatible = "rockchip,rk3228-gmac";
> reg = <0x30200000 0x10000>;
>
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb William Wu <william.wu@rock-chips.com> - 2017-05-31 03:30 +0200
[PATCH 1/2] ARM: dts: rockchip: add usb nodes on rk322x William Wu <william.wu@rock-chips.com> - 2017-05-31 03:30 +0200
Re: [PATCH 1/2] ARM: dts: rockchip: add usb nodes on rk322x Heiko Stuebner <heiko@sntech.de> - 2017-06-01 22:30 +0200
Re: [PATCH 1/2] ARM: dts: rockchip: add usb nodes on rk322x wlf <wulf@rock-chips.com> - 2017-06-02 03:50 +0200
[PATCH 2/2] ARM: dts: rockchip: enable usb for rk3229 evb board William Wu <william.wu@rock-chips.com> - 2017-05-31 03:30 +0200
csiph-web