Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1653266

Re: [PATCH 0/6] Add support for the ICU unit in Marvell Armada 7K/8K

Show all headers | View raw

Hi Thomas,

On 30/05/17 10:16, Thomas Petazzoni wrote:
> Hello,
> 
> The Marvell Armada 7K/8K SoCs are composed of two parts: the AP (which
> contains the CPU cores) and the CP (which contains most
> peripherals). The 7K SoCs have one CP, while the 8K SoCs have two CPs,
> doubling the number of available peripherals.
> 
> In terms of interrupt handling, all devices in the CPs are connected
> through wired interrupt to a unit called ICU located in each CP. This
> unit converts the wired interrupts from the devices into memory
> transactions.
> 
> Inside the AP, there is a GIC extension called GICP, which allows a
> memory write transaction to trigger a GIC SPI interrupt. The ICUs in
> each CP are therefore configured to trigger a memory write into the
> appropriate GICP register so that a wired interrupt from a CP device
> is converted into a memory write, itself converted into a regular GIC
> SPI interrupt.
> 
> Until now, the configuration of the ICU was done statically by the
> firmware, and therefore the Device Tree files in Linux were specifying
> directly GIC interrupts for the interrupts of CP devices. However,
> with the growing number of devices in the CP, a static allocation
> scheme doesn't work for the long term.
> 
> This patch series therefore makes Linux aware of the ICU: GIC SPI
> interrupts are dynamically allocated, and the ICU is configured
> accordingly to route a CP wired interrupt to the allocated GIC SPI
> interrupt.
> 
> In detail:
> 
>  - The first two patches are the Device Tree binding patches
> 
>  - The third patch is a minimal driver for the GICP unit. All it does
>    is clear interrupts that may have been left pending by the
>    firmware.
> 
>  - The fourth patch is the most important done, which adds the driver
>    for the ICU itself.
> 
>  - The fifth patch adjust Kconfig.platforms to select the GICP and ICU
>    drivers.
> 
>  - The last patch adjusts the Device Tree files of the Armada 7K/8K to
>    use the ICU.

For a first drop, this looks quite good, and the few comments I've had
should be pretty easy to address. Looking forward to reviewing v2.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 0/6] Add support for the ICU unit in Marvell Armada 7K/8K Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - 2017-05-30 11:20 +0200
  [PATCH 1/6] dt-bindings: interrupt-controller: add DT binding for the Marvell GICP Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - 2017-05-30 11:20 +0200
  [PATCH 6/6] arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - 2017-05-30 11:20 +0200
    Re: [PATCH 6/6] arm64: dts: marvell: enable GICP and ICU on Armada  7K/8K Marc Zyngier <marc.zyngier@arm.com> - 2017-05-30 16:10 +0200
      Re: [PATCH 6/6] arm64: dts: marvell: enable GICP and ICU on Armada  7K/8K Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - 2017-05-30 16:30 +0200
  Re: [PATCH 0/6] Add support for the ICU unit in Marvell Armada 7K/8K Marc Zyngier <marc.zyngier@arm.com> - 2017-05-30 16:20 +0200

csiph-web