[PATCH 0/2] reset: Basic reset controller

From	Joel Stanley <joel@jms.id.au>
Newsgroups	linux.kernel
Subject	[PATCH 0/2] reset: Basic reset controller
Date	2017-05-26 05:40 +0200
Message-ID	<tLegx-AF-3@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

Hello,

In the Aspeed SoCs we have some reset registers spread out in various parts of
the soc: in the system controller IP, as well as other peripherals. I need to be
able to deassert those resets before other drivers work.

In writing a driver to do this I realised it was very generic. So instead I've
sent a generic driver that can be used by the device tree to clear reset lines
described by single bits in a register.

Let me know what you think of the idea. I've tested this driver on our SoC to
release the UART reset.

Joel Stanley (2):
  dt-bindings: reset: Add bindings for basic reset controller
  reset: Add basic single-register reset driver

 .../devicetree/bindings/reset/reset-basic.txt      |  31 ++++++
 drivers/reset/Kconfig                              |   6 ++
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-basic.c                        | 109 +++++++++++++++++++++
 4 files changed, 147 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/reset-basic.txt
 create mode 100644 drivers/reset/reset-basic.c

-- 
2.11.0

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH 0/2] reset: Basic reset controller Joel Stanley <joel@jms.id.au> - 2017-05-26 05:40 +0200
  [PATCH 1/2] dt-bindings: reset: Add bindings for basic reset controller Joel Stanley <joel@jms.id.au> - 2017-05-26 05:40 +0200
    Re: [PATCH 1/2] dt-bindings: reset: Add bindings for basic reset  controller Philipp Zabel <p.zabel@pengutronix.de> - 2017-05-29 11:10 +0200
      Re: [PATCH 1/2] dt-bindings: reset: Add bindings for basic reset controller Joel Stanley <joel@jms.id.au> - 2017-05-29 12:20 +0200
  [PATCH 2/2] reset: Add basic single-register reset driver Joel Stanley <joel@jms.id.au> - 2017-05-26 05:40 +0200
    Re: [PATCH 2/2] reset: Add basic single-register reset driver Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-05-27 17:20 +0200
      Re: [PATCH 2/2] reset: Add basic single-register reset driver Joel Stanley <joel@jms.id.au> - 2017-05-29 12:30 +0200
        Re: [PATCH 2/2] reset: Add basic single-register reset driver Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-05-29 17:50 +0200

csiph-web