[PATCH v2 00/11] Broadcom Stingray SOC Initial Support

From	Anup Patel <anup.patel@broadcom.com>
Newsgroups	linux.kernel
Subject	[PATCH v2 00/11] Broadcom Stingray SOC Initial Support
Date	2017-05-15 14:10 +0200
Message-ID	<tHmZ4-82O-3@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

This patchset adds initial support of Broadcom Stingray SOC
by reusing existing Broadcom iProc device drivers.

Most of the patches in this patchset are DT patches except
the Stingray clock tree support which just one patch.

This patchset is based on Linux-4.12-rc1 and it is also available
at stingray-v2 branch of https://github.com/Broadcom/arm64-linux.git

Changes since v1:
 - Rebased patches for Linux-4.12-rc1
 - Removed unwanted /memreserve/ from bcm958742-base.dtsi
 - Use ranges DT property to clear view of memory-layout
 - Make bcm-sr.h part of clock DT bindings patch

Anup Patel (3):
  dt-bindings: bcm: Add Broadcom Stingray bindings document
  arm64: dts: Initial DTS files for Broadcom Stingray SOC
  arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray

Oza Pawandeep (1):
  arm64: dts: Add I2C DT nodes for Stingray SoC

Pramod Kumar (3):
  arm64: dts: Add NAND DT nodes for Stingray SOC
  arm64: dts: Add pinctrl DT nodes for Stingray SOC
  arm64: dts: Add GPIO DT nodes for Stingray SOC

Sandeep Tripathy (3):
  dt-bindings: clk: Extend binding doc for Stingray SOC
  clk: bcm: Add clocks for Stingray SOC
  arm64: dts: Add clock DT nodes for Stingray SOC

Srinath Mannam (1):
  arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC

 .../devicetree/bindings/arm/bcm/brcm,stingray.txt  |  12 +
 .../bindings/clock/brcm,iproc-clocks.txt           |  76 ++++
 arch/arm64/boot/dts/broadcom/Makefile              |   1 +
 arch/arm64/boot/dts/broadcom/stingray/Makefile     |   6 +
 .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 134 ++++++
 .../boot/dts/broadcom/stingray/bcm958742k.dts      |  78 ++++
 .../boot/dts/broadcom/stingray/bcm958742t.dts      |  40 ++
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 170 ++++++++
 .../dts/broadcom/stingray/stingray-pinctrl.dtsi    | 345 +++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 465 +++++++++++++++++++++
 drivers/clk/bcm/Kconfig                            |   8 +
 drivers/clk/bcm/Makefile                           |   1 +
 drivers/clk/bcm/clk-sr.c                           | 300 +++++++++++++
 include/dt-bindings/clock/bcm-sr.h                 | 101 +++++
 .../dt-bindings/pinctrl/brcm,pinctrl-stingray.h    |  68 +++
 15 files changed, 1805 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/Makefile
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
 create mode 100644 drivers/clk/bcm/clk-sr.c
 create mode 100644 include/dt-bindings/clock/bcm-sr.h
 create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h

-- 
2.7.4

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 00/11] Broadcom Stingray SOC Initial Support Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
  [PATCH v2 07/11] arm64: dts: Add pinctrl DT nodes for Stingray SOC Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
  [PATCH v2 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
  [PATCH v2 08/11] arm64: dts: Add GPIO DT nodes for Stingray SOC Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
  [PATCH v2 02/11] dt-bindings: clk: Extend binding doc for Stingray SOC Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
  [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom Stingray SOC Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
    Re: [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom  Stingray SOC Mark Rutland <mark.rutland@arm.com> - 2017-05-15 15:20 +0200
      Re: [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom  Stingray SOC Scott Branden <scott.branden@broadcom.com> - 2017-05-15 18:10 +0200
      Re: [PATCH v2 04/11] arm64: dts: Initial DTS files for Broadcom  Stingray SOC Anup Patel <anup.patel@broadcom.com> - 2017-05-16 12:50 +0200
  [PATCH v2 03/11] clk: bcm: Add clocks for Stingray SOC Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
  [PATCH v2 05/11] arm64: dts: Add clock DT nodes for Stingray SOC Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
  [PATCH v2 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200
  [PATCH v2 01/11] dt-bindings: bcm: Add Broadcom Stingray bindings document Anup Patel <anup.patel@broadcom.com> - 2017-05-15 14:10 +0200

csiph-web