Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1640856
| From | Jan Kiszka <jan.kiszka@siemens.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 7/8] gpio-exar/8250-exar: Make set of exported GPIOs configurable |
| Date | 2017-05-13 09:40 +0200 |
| Message-ID | <tGzOF-uC-5@gated-at.bofh.it> (permalink) |
| References | <tGzF0-rm-5@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On the SIMATIC, IOT2040 only a single pin is exportable as GPIO, the
rest is required to operate the UART. To allow modeling this case,
use device properties to specify a (consecutive) pin subset for
exporting by the gpio-exar driver.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
drivers/gpio/gpio-exar.c | 31 ++++++++++++++++++++++---------
drivers/tty/serial/8250/8250_exar.c | 16 ++++++++++++----
2 files changed, 34 insertions(+), 13 deletions(-)
diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index 98bd3eb1290e..e2cb1d83e4b0 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -31,6 +31,7 @@ struct exar_gpio_chip {
int index;
void __iomem *regs;
char name[20];
+ unsigned int first_gpio;
};
static void exar_update(struct gpio_chip *chip, unsigned int reg, int val,
@@ -51,9 +52,11 @@ static void exar_update(struct gpio_chip *chip, unsigned int reg, int val,
static int exar_set_direction(struct gpio_chip *chip, int direction,
unsigned int offset)
{
- unsigned int bank = offset / 8;
- unsigned int addr;
+ struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+ unsigned int bank, addr;
+ offset += exar_gpio->first_gpio;
+ bank = offset / 8;
addr = bank ? EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
exar_update(chip, addr, direction, offset % 8);
return 0;
@@ -73,10 +76,12 @@ static int exar_get(struct gpio_chip *chip, unsigned int reg)
static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
{
- unsigned int bank = offset / 8;
- unsigned int addr;
+ struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+ unsigned int bank, addr;
int val;
+ offset += exar_gpio->first_gpio;
+ bank = offset / 8;
addr = bank ? EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
val = exar_get(chip, addr) >> (offset % 8);
@@ -85,10 +90,12 @@ static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
{
- unsigned int bank = offset / 8;
- unsigned int addr;
+ struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+ unsigned int bank, addr;
int val;
+ offset += exar_gpio->first_gpio;
+ bank = offset / 8;
addr = bank ? EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
val = exar_get(chip, addr) >> (offset % 8);
@@ -98,9 +105,11 @@ static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
static void exar_set_value(struct gpio_chip *chip, unsigned int offset,
int value)
{
- unsigned int bank = offset / 8;
- unsigned int addr;
+ struct exar_gpio_chip *exar_gpio = gpiochip_get_data(chip);
+ unsigned int bank, addr;
+ offset += exar_gpio->first_gpio;
+ bank = offset / 8;
addr = bank ? EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
exar_update(chip, addr, value, offset % 8);
}
@@ -123,6 +132,7 @@ static int gpio_exar_probe(struct platform_device *pdev)
struct exar_gpio_chip *exar_gpio;
void __iomem *p;
int index, ret;
+ u32 val;
if (pcidev->vendor != PCI_VENDOR_ID_EXAR)
return -ENODEV;
@@ -152,9 +162,12 @@ static int gpio_exar_probe(struct platform_device *pdev)
exar_gpio->gpio_chip.get = exar_get_value;
exar_gpio->gpio_chip.set = exar_set_value;
exar_gpio->gpio_chip.base = -1;
- exar_gpio->gpio_chip.ngpio = 16;
+ device_property_read_u32(&pdev->dev, "ngpio", &val);
+ exar_gpio->gpio_chip.ngpio = val;
exar_gpio->regs = p;
exar_gpio->index = index;
+ device_property_read_u32(&pdev->dev, "first_gpio", &val);
+ exar_gpio->first_gpio = val;
ret = devm_gpiochip_add_data(&pdev->dev,
&exar_gpio->gpio_chip, exar_gpio);
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 2d056d1eeca3..8e9c0e9495f5 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -19,6 +19,7 @@
#include <linux/string.h>
#include <linux/tty.h>
#include <linux/8250_pci.h>
+#include <linux/property.h>
#include <asm/byteorder.h>
@@ -188,8 +189,14 @@ static void setup_gpio(u8 __iomem *p)
}
static void *
-xr17v35x_register_gpio(struct pci_dev *pcidev)
+xr17v35x_register_gpio(struct pci_dev *pcidev, unsigned int first_gpio,
+ unsigned int ngpio)
{
+ struct property_entry properties[] = {
+ PROPERTY_ENTRY_U32("first_gpio", first_gpio),
+ PROPERTY_ENTRY_U32("ngpio", ngpio),
+ { }
+ };
struct platform_device *pdev;
pdev = platform_device_alloc("gpio_exar", PLATFORM_DEVID_AUTO);
@@ -197,10 +204,11 @@ xr17v35x_register_gpio(struct pci_dev *pcidev)
return NULL;
/*
- * platform_device_add_data kmemdups the data, therefore we can safely
- * pass a stack reference.
+ * platform_device_add_data and platform_device_add_properties copy
+ * the data, therefore we can safely pass a stack references.
*/
if (platform_device_add_data(pdev, &pcidev, sizeof(pcidev)) < 0 ||
+ platform_device_add_properties(pdev, properties) < 0 ||
platform_device_add(pdev) < 0) {
platform_device_put(pdev);
return NULL;
@@ -242,7 +250,7 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
/* Setup Multipurpose Input/Output pins. */
setup_gpio(p);
- port->port.private_data = xr17v35x_register_gpio(pcidev);
+ port->port.private_data = xr17v35x_register_gpio(pcidev, 0, 16);
}
return 0;
--
2.12.0
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 0/8] serial/gpio: exar: Fixes and support for IOT2000 Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-13 09:40 +0200
[PATCH 5/8] gpio: exar: Fix reading of directions and values Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-13 09:40 +0200
Re: [PATCH 5/8] gpio: exar: Fix reading of directions and values Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-05-13 15:40 +0200
Re: [PATCH 5/8] gpio: exar: Fix reading of directions and values Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-18 07:30 +0200
Re: [PATCH 5/8] gpio: exar: Fix reading of directions and values Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-18 12:20 +0200
Re: [PATCH 5/8] gpio: exar: Fix reading of directions and values Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-18 12:30 +0200
Re: [PATCH 5/8] gpio: exar: Fix reading of directions and values Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-05-18 12:30 +0200
Re: [PATCH 5/8] gpio: exar: Fix reading of directions and values Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-05-18 12:20 +0200
[PATCH 7/8] gpio-exar/8250-exar: Make set of exported GPIOs configurable Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-13 09:40 +0200
Re: [PATCH 7/8] gpio-exar/8250-exar: Make set of exported GPIOs configurable Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-05-13 16:00 +0200
[PATCH 1/8] serial: exar: Preconfigure xr17v35x MPIOs as output Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-13 09:40 +0200
Re: [PATCH 1/8] serial: exar: Preconfigure xr17v35x MPIOs as output Linus Walleij <linus.walleij@linaro.org> - 2017-05-22 17:50 +0200
[PATCH 3/8] gpio: exar: Allocate resources on behalf of the platform device Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-13 09:40 +0200
Re: [PATCH 3/8] gpio: exar: Allocate resources on behalf of the platform device Andy Shevchenko <andy.shevchenko@gmail.com> - 2017-05-13 15:30 +0200
Re: [PATCH 3/8] gpio: exar: Allocate resources on behalf of the platform device Linus Walleij <linus.walleij@linaro.org> - 2017-05-22 17:50 +0200
[PATCH 6/8] serial: uapi: Add support for bus termination Jan Kiszka <jan.kiszka@siemens.com> - 2017-05-13 09:40 +0200
csiph-web