Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1638164
| From | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [regression, bisected] 4.11+ imx uarts broken |
| Date | 2017-05-09 16:40 +0200 |
| Message-ID | <tFesW-2Ya-9@gated-at.bofh.it> (permalink) |
| References | <tF7B8-6TD-13@gated-at.bofh.it> <tF7B8-6TD-11@gated-at.bofh.it> <tFesW-2Ya-11@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Tue, May 09, 2017 at 10:25:40AM +0300, Mika Penttilä wrote:
> On 05/09/2017 10:14 AM, Uwe Kleine-König wrote:
> > Hello Mika,
> >
> > On Tue, May 09, 2017 at 07:18:09AM +0300, Mika Penttilä wrote:
> >> The following commit e61c38d85b7 makes the uarts on i.MX6 nonfunctional (no data transmitted or received).
> >> With e61c38d85b7 reverted the uarts work ok.
> >>
> >> -------------------
> >> commit e61c38d85b7392e033ee03bca46f1d6006156175
> >> Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> >> Date: Tue Apr 4 11:18:51 2017 +0200
> >>
> >> serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off
> >>
> >> --------------------
> >
> > are you operating the UART in DTE or DCE mode? Does this affect all
> > UARTs or only those that are not used in the bootloader?
>
> I am operating in DCE mode. The debug/console uart works ok, but two others don't.
>
> >
> > Looking at the patch I wonder if setting IMX21_UCR3_RXDMUXSEL |
> > UCR3_ADNIMP is missing for you.
> >
>
> Probably yes, but I can verify this later and get back to you.
can you please test this patch:
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 33509b4beaec..2182548ff0e1 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2193,9 +2193,14 @@ static int serial_imx_probe(struct platform_device *pdev)
*/
writel(IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP | UCR3_DSR,
sport->port.membase + UCR3);
-
} else {
+ unsigned long ucr3 = UCR3_DSR;
+
+ if (!is_imx1_uart(sport))
+ ucr3 |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP;
+
writel(0, sport->port.membase + UFCR);
+ writel(ucr3, sport->port.membase + UCR3);
}
clk_disable_unprepare(sport->clk_ipg);
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
Re: [regression, bisected] 4.11+ imx uarts broken Uwe Kleine-König <u.kleine-koenig@pengutronix.de> - 2017-05-09 09:20 +0200 Re: [regression, bisected] 4.11+ imx uarts broken Uwe Kleine-König <u.kleine-koenig@pengutronix.de> - 2017-05-09 16:40 +0200
csiph-web