Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1572233
| From | Greg KH <gregkh@linuxfoundation.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line |
| Date | 2017-02-02 11:00 +0100 |
| Message-ID | <t6mlk-2a2-9@gated-at.bofh.it> (permalink) |
| References | <t4ivv-70N-7@gated-at.bofh.it> <t6kjv-SI-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Thu, Feb 02, 2017 at 07:42:36AM +0000, Lee Jones wrote: > Hi Greg, Jiri, > > > When hardware flow-control is disabled, manual toggling of the UART's > > reset line (RTS) using userland applications (e.g. stty) is not > > possible, since the ASC IP does not provide this functionality in the > > same was as some other IPs do. Thus, we have to do this manually. > > > > This set ensures the correct Pinctrl groups are configured and > > obtained for both manual toggling of the RTS line and for the IP to > > take over the lines when HW flow-control is requested by the user. > > > > Lee Jones (10): > > serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled > > serial: st-asc: Provide RTS functionality > > serial: st-asc: Read in all Pinctrl states > > serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles > > serial: st-asc: Use generic DT binding for announcing RTS/CTS lines > > dt-bindings: serial: Update 'uart-has-rtscts' description > > ARM: dts: STiH410-b2260: Identify the UART RTS line > > ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control > > ARM: dts: STiH407-family: Use new Pinctrl groups > > ARM: dts: STiH410-b2260: Enable HW flow-control > > > > .../devicetree/bindings/serial/serial.txt | 3 +- > > arch/arm/boot/dts/stih407-family.dtsi | 3 +- > > arch/arm/boot/dts/stih407-pinctrl.dtsi | 12 ++- > > arch/arm/boot/dts/stih410-b2260.dts | 5 + > > drivers/tty/serial/st-asc.c | 101 +++++++++++++++++++-- > > 5 files changed, 110 insertions(+), 14 deletions(-) > > Looks like everyone is happy with the set. > > Are you planning to merge it? I'll take it in my next round of patches, give me a few days to sync up, I normally do serial patches once a week or so. thanks, greg k-h
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Re: [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line Lee Jones <lee.jones@linaro.org> - 2017-02-02 08:50 +0100
Re: [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line Greg KH <gregkh@linuxfoundation.org> - 2017-02-02 11:00 +0100
Re: [PATCH v2 00/10] serial: st-asc: Allow handling of RTS line Lee Jones <lee.jones@linaro.org> - 2017-02-03 10:30 +0100
csiph-web