Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1568547

[PATCH v2 08/10] ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control

From Lee Jones <lee.jones@linaro.org>
Newsgroups linux.kernel
Subject [PATCH v2 08/10] ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control
Date 2017-01-27 18:40 +0100
Message-ID <t4iFd-74B-33@gated-at.bofh.it> (permalink)
References <t4ivv-70N-7@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


Each serial port which supports HW flow-control should have 2 Pinctrl
groups.  Once for when HW flow-control is in progress, where the IP
will take over controlling the lines and another group which enables
the lines to be toggled using GPIO mechanisms.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih407-pinctrl.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index daab16b..fbb7f86 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -465,8 +465,16 @@
 			serial0 {
 				pinctrl_serial0: serial0-0 {
 					st,pins {
-						tx = <&pio17 0 ALT1 OUT>;
-						rx = <&pio17 1 ALT1 IN>;
+						tx =  <&pio17 0 ALT1 OUT>;
+						rx =  <&pio17 1 ALT1 IN>;
+					};
+				};
+				pinctrl_serial0_flowctrl: serial0-0_flowctrl {
+					st,pins {
+						tx =  <&pio17 0 ALT1 OUT>;
+						rx =  <&pio17 1 ALT1 IN>;
+						cts = <&pio17 2 ALT1 IN>;
+						rts = <&pio17 3 ALT1 OUT>;
 					};
 				};
 			};
-- 
2.9.3

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH v2 00/10] serial: st-asc: Allow handling of RTS line Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:30 +0100
  [PATCH v2 03/10] serial: st-asc: Read in all Pinctrl states Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:30 +0100
  [PATCH v2 06/10] dt-bindings: serial: Update 'uart-has-rtscts' description Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:30 +0100
  [PATCH v2 02/10] serial: st-asc: Provide RTS functionality Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:30 +0100
  [PATCH v2 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:40 +0100
    Re: [PATCH v2 09/10] ARM: dts: STiH407-family: Use new Pinctrl groups Patrice CHOTARD <patrice.chotard@st.com> - 2017-01-30 12:10 +0100
  [PATCH v2 04/10] serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:40 +0100
  [PATCH v2 10/10] ARM: dts: STiH410-b2260: Enable HW flow-control Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:40 +0100
  [PATCH v2 08/10] ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:40 +0100
  [PATCH v2 05/10] serial: st-asc: Use generic DT binding for announcing RTS/CTS lines Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:40 +0100
  [PATCH v2 01/10] serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:40 +0100
  [PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line Lee Jones <lee.jones@linaro.org> - 2017-01-27 18:40 +0100

csiph-web