Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1559920

[PATCH v3 8/13] arm64: allwinner: a64: Add MMC nodes

Show all headers | View raw

From: Andre Przywara <andre.przywara@arm.com>

The A64 has 3 MMC controllers, one of them being especially targeted to
eMMC. Among other things, it has a data strobe signal and a 8 bits data
width.

The two other are more usual controllers that will have a 4 bits width at
most and no data strobe signal, which limits it to more usual SD or MMC
peripherals.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 39 ++++++++++++++++++++-
 1 file changed, 39 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 99b6bb1e141c..143e9706438f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -299,6 +299,45 @@
 			#size-cells = <0>;
 		};
 
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
-- 
git-series 0.8.11

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v3 0/13] arm64: allwinner: a64: Enable MMC support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
  [PATCH v3 1/13] mmc: sunxi: Fix clock frequency change sequence Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
    Re: [PATCH v3 1/13] mmc: sunxi: Fix clock frequency change sequence Ulf Hansson <ulf.hansson@linaro.org> - 2017-01-24 09:20 +0100
      Re: [PATCH v3 1/13] mmc: sunxi: Fix clock frequency change sequence Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-25 09:30 +0100
  [PATCH v3 3/13] mmc: sunxi: Always set signal delay to 0 for A64 Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
    Re: [PATCH v3 3/13] mmc: sunxi: Always set signal delay to 0 for A64 Ulf Hansson <ulf.hansson@linaro.org> - 2017-01-24 09:20 +0100
      Re: [PATCH v3 3/13] mmc: sunxi: Always set signal delay to 0 for A64 Andre Przywara <andre.przywara@arm.com> - 2017-01-24 10:20 +0100
      Re: [PATCH v3 3/13] mmc: sunxi: Always set signal delay to 0 for A64 Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-25 10:20 +0100
  [PATCH v3 8/13] arm64: allwinner: a64: Add MMC nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
    Re: [PATCH v3 8/13] arm64: allwinner: a64: Add MMC nodes Corentin Labbe <clabbe.montjoie@gmail.com> - 2017-01-16 20:40 +0100
      Re: [PATCH v3 8/13] arm64: allwinner: a64: Add MMC nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-25 10:20 +0100
  [PATCH v3 6/13] mmc: sunxi: Add EMMC (MMC2) controller compatible Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
  [PATCH v3 10/13] arm64: allwinner: a64: Increase the MMC max frequency Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
  [PATCH v3 9/13] arm64: allwinner: a64: Add MMC pinctrl nodes Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
  [PATCH v3 4/13] mmc: sunxi: Enable the new timings for the A64 MMC controllers Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
  [PATCH v3 2/13] mmc: sunxi: Gate the clock when rate is 0 Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-16 18:10 +0100
    Re: [PATCH v3 2/13] mmc: sunxi: Gate the clock when rate is 0 Ulf Hansson <ulf.hansson@linaro.org> - 2017-01-24 09:20 +0100
  Re: [PATCH v3 0/13] arm64: allwinner: a64: Enable MMC support Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-23 12:00 +0100

csiph-web