Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node

From	Kevin Hilman <khilman@baylibre.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node
Date	2017-01-18 01:40 +0100
Message-ID	<t0Ms9-5wG-3@gated-at.bofh.it> (permalink)
References	<t0B3H-72K-5@gated-at.bofh.it> <t0B3I-72K-29@gated-at.bofh.it>
Organization	BayLibre

Show all headers | View raw

Bartosz Golaszewski <bgolaszewski@baylibre.com> writes:

> Enable the SATA node for da850-lcdk. We omit the pinctrl property on
> purpose - the muxed SATA pins are not hooked up to anything
> SATA-related on the lcdk.
>
> The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of
> 15 for 1.5GHz PLL rate.

leftover comment from previous version?

Kevin

> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/boot/dts/da850-lcdk.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
> index afcb482..fbeee3c 100644
> --- a/arch/arm/boot/dts/da850-lcdk.dts
> +++ b/arch/arm/boot/dts/da850-lcdk.dts
> @@ -105,6 +105,10 @@
>  	status = "okay";
>  };
>  
> +&sata {
> +	status = "okay";
> +};
> +
>  &mdio {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&mdio_pins>;

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2017-01-17 13:30 +0100
  Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node David Lechner <david@lechnology.com> - 2017-01-17 20:00 +0100
  Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node Kevin Hilman <khilman@baylibre.com> - 2017-01-18 01:40 +0100

csiph-web