Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1560563

[RFC/RFT PATCH 0/4] drm/bridge: dw-hdmi: Add support for Custom PHYs

From Neil Armstrong <narmstrong@baylibre.com>
Newsgroups linux.kernel
Subject [RFC/RFT PATCH 0/4] drm/bridge: dw-hdmi: Add support for Custom PHYs
Date 2017-01-17 13:40 +0100
Message-ID <t0Bdn-768-15@gated-at.bofh.it> (permalink)
Organization linux.* mail to news gateway

Show all headers | View raw


The Amlogic GX SoCs implements a Synopsys DesignWare HDMI TX Controller
in combination with a very custom PHY.

Thanks to Laurent Pinchart's changes, the HW report the following :
 Detected HDMI TX controller v2.01a with HDCP (Vendor PHY)

The following differs from common PHY integration as managed in the current
driver :
 - Amlogic PHY is not configured through the internal I2C link
 - Amlogic PHY do not use the ENTMDS, SVSRET, PDDQ, ... signals from the controller
 - Amlogic PHY do not export HPD ands RxSense signals to the controller

And finally, concerning the controller integration :
 - the Controller registers are not flat memory-mapped, and uses an
    addr+read/write register pair to write all registers.
 - Inputs only YUV444 pixel data

This is why the following patchset implements :
 - Conversion to regmap for register access
 - Add more callbacks ops to handle Custom PHYs
 - Configure the Input format from the plat_data
 - Fixes a bug that considers the input to be always RBG and sends bad pixel
   format to a DVI sink by disabling CSC

This patchset makes the Amlogix GX SoCs HDMI output successfully work, but I
do not have access to Renesas, i.MX or RockChip SoCs to test against
potentiel regressions, like the regmap conversion.

This patchset is based on the latest Laurent Pinchart dw-hdmi serie at [1].

[1] http://lkml.kernel.org/r/20170117082910.27023-1-laurent.pinchart+renesas@ideasonboard.com

Neil Armstrong (4):
  drm/bridge: dw-hdmi: Switch to regmap for register access
  drm/bridge: dw-hdmi: Add support for custom PHY handling
  drm/bridge: dw-hdmi: Enable CSC even for DVI
  drm/bridge: dw-hdmi: Take input format from plat_data

 drivers/gpu/drm/bridge/dw-hdmi.c | 194 +++++++++++++++++++++++++--------------
 include/drm/bridge/dw_hdmi.h     |  18 ++++
 2 files changed, 143 insertions(+), 69 deletions(-)

-- 
1.9.1

Back to linux.kernel | Previous | NextNext in thread | Find similar | Unroll thread


Thread

[RFC/RFT PATCH 0/4] drm/bridge: dw-hdmi: Add support for Custom PHYs Neil Armstrong <narmstrong@baylibre.com> - 2017-01-17 13:40 +0100
  [RFC/RFT PATCH 3/4] drm/bridge: dw-hdmi: Enable CSC even for DVI Neil Armstrong <narmstrong@baylibre.com> - 2017-01-17 13:40 +0100
    Re: [RFC/RFT PATCH 3/4] drm/bridge: dw-hdmi: Enable CSC even for DVI Laurent Pinchart <laurent.pinchart@ideasonboard.com> - 2017-01-17 15:50 +0100
    Re: [RFC/RFT PATCH 3/4] drm/bridge: dw-hdmi: Enable CSC even for DVI Jose Abreu <Jose.Abreu@synopsys.com> - 2017-01-18 11:40 +0100
      Re: [RFC/RFT PATCH 3/4] drm/bridge: dw-hdmi: Enable CSC even for DVI Neil Armstrong <narmstrong@baylibre.com> - 2017-01-18 12:30 +0100
  [RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from plat_data Neil Armstrong <narmstrong@baylibre.com> - 2017-01-17 13:40 +0100
    Re: [RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from plat_data Laurent Pinchart <laurent.pinchart@ideasonboard.com> - 2017-01-17 16:00 +0100
    Re: [RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from  plat_data Jose Abreu <Jose.Abreu@synopsys.com> - 2017-01-18 11:40 +0100
      Re: [RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from  plat_data Neil Armstrong <narmstrong@baylibre.com> - 2017-01-18 12:30 +0100
        Re: [RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from plat_data Laurent Pinchart <laurent.pinchart@ideasonboard.com> - 2017-01-18 22:00 +0100
          Re: [RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from  plat_data Jose Abreu <Jose.Abreu@synopsys.com> - 2017-01-19 16:30 +0100
            Re: [RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from plat_data Laurent Pinchart <laurent.pinchart@ideasonboard.com> - 2017-01-19 17:50 +0100
            Re: [RFC/RFT PATCH 4/4] drm/bridge: dw-hdmi: Take input format from  plat_data Hans Verkuil <hansverk@cisco.com> - 2017-01-19 18:00 +0100

csiph-web