Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1513878

Re: [PATCH] mfd: stmpe: Fix RESET regression on STMPE2401

Show all headers | View raw

On Tue, 01 Nov 2016, Linus Walleij wrote:

> Since commit c4dd1ba355aae2bc3d1213da6c66c53e3c31e028
> ("mfd: stmpe: Add reset support for all STMPE variant")
> we're resetting the STMPE expanders before use.
> 
> This caused a regression on the STMP2401 on the Nomadik
> NHK8815:
> 
> stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101
> nmk-i2c 101f8000.i2c0: write to slave 0x43 timed out
> nmk-i2c 101f8000.i2c0: no ack received after address transmission
> stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101
> nmk-i2c 101f8000.i2c0: write to slave 0x44 timed out
> nmk-i2c 101f8000.i2c0: no ack received after address transmission
> 
> It turns out that we start to poll for the reset bit to
> go low again too quickly: the STMPE2401 is not yet online and
> ready to be asked for the status of the RESET bit.
> 
> By introducing a 10ms delay before starting to hammer
> the register for information, we get back to normal:
> 
> stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101
> stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101
> 
> Cc: stable@vger.kernel.org
> Cc: Patrice Chotard <patrice.chotard@st.com>
> Cc: Amelie Delaunay <amelie.delaunay@st.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Fixes: c4dd1ba355aa ("mfd: stmpe: Add reset support for all STMPE variant")
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  drivers/mfd/stmpe.c | 2 ++
>  1 file changed, 2 insertions(+)

Applied to -fixes.

> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index cfdae8a3d779..b0c7bcdaf5df 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -851,6 +851,8 @@ static int stmpe_reset(struct stmpe *stmpe)
>  	if (ret < 0)
>  		return ret;
>  
> +	msleep(10);
> +
>  	timeout = jiffies + msecs_to_jiffies(100);
>  	while (time_before(jiffies, timeout)) {
>  		ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH] mfd: stmpe: Fix RESET regression on STMPE2401 Linus Walleij <linus.walleij@linaro.org> - 2016-11-01 10:30 +0100
  Re: [PATCH] mfd: stmpe: Fix RESET regression on STMPE2401 Patrice Chotard <patrice.chotard@st.com> - 2016-11-02 14:20 +0100
  Re: [PATCH] mfd: stmpe: Fix RESET regression on STMPE2401 Lee Jones <lee.jones@linaro.org> - 2016-11-02 15:40 +0100

csiph-web