Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1500088

Re: [PATCH RFC v2 net-next 0/8] net: qualcomm: add QCA7000 UART driver

Show all headers | View raw

> Stefan Wahren <stefan.wahren@i2se.com> hat am 26. September 2016 um 13:07
> geschrieben:
> 
> 
> The Qualcomm QCA7000 HomePlug GreenPHY supports two interfaces:
> UART and SPI. This patch series adds the missing support for UART.
> 
> This driver based on the Qualcomm code [1], but contains some changes:
> * use random MAC address per default
> * use net_device_stats from device
> * share frame decoding between SPI and UART driver
> * improve error handling
> * reimplement tty_wakeup with work queue (based on slcan)
> 
> The patches 1 - 3 are just for clean up and are not related to
> the UART support. Patches 4 - 7 prepare the existing QCA7000
> code for UART support. The last patch contains the new driver.
> 
> In order to test the driver a modified slattach in userspace is also
> required. A prepared busybox (includes slattach) can be found here [2].
> 
> The code itself has been tested on a Freescale i.MX28 board.
> 
> Changes in v2:
>   * fix build issue by using netif_trans_update() and dev_trans_start()
> 
> [1] - https://github.com/IoE/qca7000
> [2] - https://github.com/lategoodbye/busybox/commits/qca7k_support_1_24
> 

Gently ping, since i didn't receive any comment for this version.

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH RFC v2 net-next 0/8] net: qualcomm: add QCA7000 UART driver Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:10 +0200
  [PATCH RFC v2 net-next 1/8] net: qualcomm: remove unnecessary includes Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:10 +0200
  [PATCH RFC v2 net-next 6/8] net: qualcomm: prepare frame decoding for UART driver Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:10 +0200
  [PATCH RFC v2 net-next 7/8] net: qualcomm: make qca_common a separate kernel module Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:10 +0200
  [PATCH RFC v2 net-next 8/8] net: qualcomm: add QCA7000 UART driver Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:10 +0200
  [PATCH RFC v2 net-next 3/8] net: qualcomm: move qcaspi_tx_cmd to qca_spi.c Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:10 +0200
  [PATCH RFC v2 net-next 2/8] net: qca_debug: use net_device_ops instead of direct call Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:20 +0200
  [PATCH RFC v2 net-next 5/8] net: qualcomm: move MTU handling to qca_common Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:20 +0200
  [PATCH RFC v2 net-next 4/8] net: qualcomm: rename qca_framing.c to qca_common.c Stefan Wahren <stefan.wahren@i2se.com> - 2016-09-26 13:20 +0200
  Re: [PATCH RFC v2 net-next 0/8] net: qualcomm: add QCA7000 UART  driver Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-10-13 10:20 +0200
  Re: [PATCH RFC v2 net-next 0/8] net: qualcomm: add QCA7000 UART  driver Stefan Wahren <stefan.wahren@i2se.com> - 2016-10-13 10:20 +0200
    Re: [PATCH RFC v2 net-next 0/8] net: qualcomm: add QCA7000 UART  driver Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2016-10-13 15:20 +0200

csiph-web