Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1483506

Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support

From Jagan Teki <jagan@amarulasolutions.com>
Newsgroups linux.kernel
Subject Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support
Date 2016-09-14 19:50 +0200
Message-ID <shmtP-3OB-3@gated-at.bofh.it> (permalink)
References <sghPz-1c2-7@gated-at.bofh.it> <sghPz-1c2-25@gated-at.bofh.it> <sh4wV-85g-27@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

On Wed, Sep 14, 2016 at 4:06 AM, Fabio Estevam <festevam@gmail.com> wrote:
> On Sun, Sep 11, 2016 at 3:30 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
>
>> +       reg_3p3v: regulator-3p3v {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "3P3V";
>> +               regulator-min-microvolt = <3300000>;
>> +               regulator-max-microvolt = <3300000>;
>> +               regulator-boot-on;
>> +               regulator-always-on;
>
> You should remove " regulator-boot-on" and "regulator-always-on" as
> the reg_3p3v regulator is controlled by the can nodes.

OK, but where it showed on the processor manual? I only find LDO_2P5
regulator which is connected to high speed devices, HDMI, SATA etc on
Figure 50-1: Power system overview

thanks!
-- 
Jagan Teki
Free Software Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support Jagan Teki <jagannadh.teki@gmail.com> - 2016-09-11 20:40 +0200
  Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual  initial support Fabio Estevam <festevam@gmail.com> - 2016-09-14 00:40 +0200
    Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual  initial support Jagan Teki <jagan@amarulasolutions.com> - 2016-09-14 19:50 +0200
      Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual  initial support Fabio Estevam <festevam@gmail.com> - 2016-09-14 20:10 +0200
        Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual  initial support Michael Trimarchi <michael@amarulasolutions.com> - 2016-09-20 15:30 +0200
          Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual  initial support Fabio Estevam <festevam@gmail.com> - 2016-09-21 18:50 +0200
  Re: [PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual  initial support Fabio Estevam <festevam@gmail.com> - 2016-09-14 05:40 +0200

csiph-web