[PATCH v2 02/10] reset: berlin: add driver Kconfig option

From	Philipp Zabel <p.zabel@pengutronix.de>
Newsgroups	linux.kernel
Subject	[PATCH v2 02/10] reset: berlin: add driver Kconfig option
Date	2016-08-30 10:30 +0200
Message-ID	<sbMAF-2mW-11@gated-at.bofh.it> (permalink)
References	<sbMAF-2mW-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Visible only if COMPILE_TEST is enabled, this allows to include the
driver in build tests.

Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/Kconfig  | 6 ++++++
 drivers/reset/Makefile | 2 +-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 9da0507..1194cbe 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -21,6 +21,12 @@ config RESET_ATH79
 	  This enables the ATH79 reset controller driver that supports the
 	  AR71xx SoC reset controller.
 
+config RESET_BERLIN
+	bool "Berlin Reset Driver" if COMPILE_TEST
+	default ARCH_BERLIN
+	help
+	  This enables the reset controller driver for Marvell Berlin SoCs.
+
 config RESET_OXNAS
 	bool
 
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index e3fc337..34c0b23 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -1,7 +1,6 @@
 obj-y += core.o
 obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
-obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
 obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
 obj-$(CONFIG_ARCH_MESON) += reset-meson.o
 obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
@@ -10,6 +9,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
 obj-$(CONFIG_ARCH_HISI) += hisilicon/
 obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
+obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
 obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
-- 
2.8.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v2 02/10] reset: berlin: add driver Kconfig option Philipp Zabel <p.zabel@pengutronix.de> - 2016-08-30 10:30 +0200

csiph-web