Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1532344

Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs and dma changed

Show all headers | View raw

On 11/29/2016 08:03 AM, David Howells wrote:
> How about the attached?  Obviously it need extending to other drivers.

This is great, I like it a lot better.

Reviewed-by: Corey Minyard <cminyard@mvista.com>

-corey

> I thought that if I'm changing the module_param annotations anyway then it's
> probably worth bunging in an extra parameter that notes what the parameter
> modifies (ioport, iomem, etc.) for future reference, even if we don't store
> it.
>
> David
> ---
> diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
> index 7fb9c299a183..157e96391eca 100644
> --- a/drivers/char/ipmi/ipmi_si_intf.c
> +++ b/drivers/char/ipmi/ipmi_si_intf.c
> @@ -1375,39 +1375,39 @@ MODULE_PARM_DESC(type, "Defines the type of each interface, each"
>   		 " interface separated by commas.  The types are 'kcs',"
>   		 " 'smic', and 'bt'.  For example si_type=kcs,bt will set"
>   		 " the first interface to kcs and the second to bt");
> -module_param_array(addrs, ulong, &num_addrs, 0);
> +module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0);
>   MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
>   		 " addresses separated by commas.  Only use if an interface"
>   		 " is in memory.  Otherwise, set it to zero or leave"
>   		 " it blank.");
> -module_param_array(ports, uint, &num_ports, 0);
> +module_param_hw_array(ports, uint, ioport, &num_ports, 0);
>   MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
>   		 " addresses separated by commas.  Only use if an interface"
>   		 " is a port.  Otherwise, set it to zero or leave"
>   		 " it blank.");
> -module_param_array(irqs, int, &num_irqs, 0);
> +module_param_hw_array(irqs, int, irq, &num_irqs, 0);
>   MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
>   		 " addresses separated by commas.  Only use if an interface"
>   		 " has an interrupt.  Otherwise, set it to zero or leave"
>   		 " it blank.");
> -module_param_array(regspacings, int, &num_regspacings, 0);
> +module_param_hw_array(regspacings, int, other, &num_regspacings, 0);
>   MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
>   		 " and each successive register used by the interface.  For"
>   		 " instance, if the start address is 0xca2 and the spacing"
>   		 " is 2, then the second address is at 0xca4.  Defaults"
>   		 " to 1.");
> -module_param_array(regsizes, int, &num_regsizes, 0);
> +module_param_hw_array(regsizes, int, other, &num_regsizes, 0);
>   MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
>   		 " This should generally be 1, 2, 4, or 8 for an 8-bit,"
>   		 " 16-bit, 32-bit, or 64-bit register.  Use this if you"
>   		 " the 8-bit IPMI register has to be read from a larger"
>   		 " register.");
> -module_param_array(regshifts, int, &num_regshifts, 0);
> +module_param_hw_array(regshifts, int, other, &num_regshifts, 0);
>   MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
>   		 " IPMI register, in bits.  For instance, if the data"
>   		 " is read from a 32-bit word and the IPMI data is in"
>   		 " bit 8-15, then the shift would be 8");
> -module_param_array(slave_addrs, int, &num_slave_addrs, 0);
> +module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0);
>   MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
>   		 " the controller.  Normally this is 0x20, but can be"
>   		 " overridden by this parm.  This is an array indexed"
> @@ -3725,12 +3725,6 @@ static int init_ipmi_si(void)
>   	struct smi_info *e;
>   	enum ipmi_addr_src type = SI_INVALID;
>   
> -	if ((num_addrs || num_ports || num_irqs) &&
> -	    kernel_is_locked_down()) {
> -		pr_err(PFX "Kernel is locked down\n");
> -		return -EPERM;
> -	}
> -
>   	if (initialized)
>   		return 0;
>   	initialized = 1;
> diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
> index 52666d90ca94..bdb884fba79a 100644
> --- a/include/linux/moduleparam.h
> +++ b/include/linux/moduleparam.h
> @@ -60,9 +60,11 @@ struct kernel_param_ops {
>    * Flags available for kernel_param
>    *
>    * UNSAFE - the parameter is dangerous and setting it will taint the kernel
> + * HWPARAM - Hardware param not permitted in lockdown mode
>    */
>   enum {
> -	KERNEL_PARAM_FL_UNSAFE = (1 << 0)
> +	KERNEL_PARAM_FL_UNSAFE	= (1 << 0),
> +	KERNEL_PARAM_FL_HWPARAM	= (1 << 1),
>   };
>   
>   struct kernel_param {
> @@ -451,6 +453,62 @@ extern int param_set_bint(const char *val, const struct kernel_param *kp);
>   			    perm, -1, 0);				\
>   	__MODULE_PARM_TYPE(name, "array of " #type)
>   
> +enum hwparam_type {
> +	hwparam_ioport,		/* Module parameter configures an I/O port */
> +	hwparam_iomem,		/* Module parameter configures an I/O mem address */
> +	hwparam_irq,		/* Module parameter configures an I/O port */
> +	hwparam_dma,		/* Module parameter configures a DMA channel */
> +	hwparam_dma_addr,	/* Module parameter configures a DMA buffer address */
> +	hwparam_other,		/* Module parameter configures some other value */
> +};
> +
> +/**
> + * module_param_hw - A parameter representing a hw parameters
> + * @name: a valid C identifier which is the parameter name.
> + * @type: the type of the parameter
> + * @hwtype: what the value represents (enum hwparam_type)
> + * @perm: visibility in sysfs.
> + *
> + * Usually it's a good idea to have variable names and user-exposed names the
> + * same, but that's harder if the variable must be non-static or is inside a
> + * structure.  This allows exposure under a different name.
> + */
> +#define module_param_hw(name, type, hwtype, perm)			\
> +	param_check_##type(name, &(name));				\
> +	__module_param_call(MODULE_PARAM_PREFIX, name,			\
> +			    &param_ops_##type, &name,			\
> +			    perm, -1,					\
> +			    KERNEL_PARAM_FL_HWPARAM | (hwparam_##hwtype & 0));	\
> +	__MODULE_PARM_TYPE(name, #type)
> +
> +/**
> + * module_param_hw_array - A parameter representing an array of hw parameters
> + * @name: the name of the array variable
> + * @type: the type, as per module_param()
> + * @hwtype: what the value represents (enum hwparam_type)
> + * @nump: optional pointer filled in with the number written
> + * @perm: visibility in sysfs
> + *
> + * Input and output are as comma-separated values.  Commas inside values
> + * don't work properly (eg. an array of charp).
> + *
> + * ARRAY_SIZE(@name) is used to determine the number of elements in the
> + * array, so the definition must be visible.
> + */
> +#define module_param_hw_array(name, type, hwtype, nump, perm)		\
> +	param_check_##type(name, &(name)[0]);				\
> +	static const struct kparam_array __param_arr_##name		\
> +	= { .max = ARRAY_SIZE(name), .num = nump,			\
> +	    .ops = &param_ops_##type,					\
> +	    .elemsize = sizeof(name[0]), .elem = name };		\
> +	__module_param_call(MODULE_PARAM_PREFIX, name,			\
> +			    &param_array_ops,				\
> +			    .arr = &__param_arr_##name,			\
> +			    perm, -1,					\
> +			    KERNEL_PARAM_FL_HWPARAM | (hwparam_##hwtype & 0));	\
> +	__MODULE_PARM_TYPE(name, "array of " #type)
> +
> +
>   extern const struct kernel_param_ops param_array_ops;
>   
>   extern const struct kernel_param_ops param_ops_string;
> diff --git a/kernel/params.c b/kernel/params.c
> index a6d6149c0fe6..2b68e6dad677 100644
> --- a/kernel/params.c
> +++ b/kernel/params.c
> @@ -108,13 +108,20 @@ bool parameq(const char *a, const char *b)
>   	return parameqn(a, b, strlen(a)+1);
>   }
>   
> -static void param_check_unsafe(const struct kernel_param *kp)
> +static bool param_check_unsafe(const struct kernel_param *kp,
> +			       const char *doing)
>   {
>   	if (kp->flags & KERNEL_PARAM_FL_UNSAFE) {
>   		pr_warn("Setting dangerous option %s - tainting kernel\n",
>   			kp->name);
>   		add_taint(TAINT_USER, LOCKDEP_STILL_OK);
>   	}
> +
> +	if (kp->flags & KERNEL_PARAM_FL_HWPARAM && kernel_is_locked_down()) {
> +		pr_err("Command line-specified device addresses, irqs and dma channels are not permitted when the kernel is locked down (%s.%s)\n", doing, kp->name);
> +		return false;
> +	}
> +	return true;
>   }
>   
>   static int parse_one(char *param,
> @@ -144,8 +151,10 @@ static int parse_one(char *param,
>   			pr_debug("handling %s with %p\n", param,
>   				params[i].ops->set);
>   			kernel_param_lock(params[i].mod);
> -			param_check_unsafe(&params[i]);
> -			err = params[i].ops->set(val, &params[i]);
> +			if (param_check_unsafe(&params[i], doing))
> +				err = params[i].ops->set(val, &params[i]);
> +			else
> +				err = -EPERM;
>   			kernel_param_unlock(params[i].mod);
>   			return err;
>   		}
> @@ -620,8 +629,10 @@ static ssize_t param_attr_store(struct module_attribute *mattr,
>   		return -EPERM;
>   
>   	kernel_param_lock(mk->mod);
> -	param_check_unsafe(attribute->param);
> -	err = attribute->param->ops->set(buf, attribute->param);
> +	if (param_check_unsafe(attribute->param, mk->mod->name))
> +		err = attribute->param->ops->set(buf, attribute->param);
> +	else
> +		err = -EPERM;
>   	kernel_param_unlock(mk->mod);
>   	if (!err)
>   		return len;

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs  and dma changed Corey Minyard <minyard@acm.org> - 2016-11-28 23:40 +0100
  Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs and dma changed David Howells <dhowells@redhat.com> - 2016-11-29 01:20 +0100
    Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs  and dma changed Corey Minyard <minyard@acm.org> - 2016-11-29 01:30 +0100
      Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs and dma changed David Howells <dhowells@redhat.com> - 2016-11-29 15:10 +0100
        Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs  and dma changed Corey Minyard <minyard@acm.org> - 2016-11-29 15:40 +0100
        Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs  and dma changed One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> - 2016-11-30 15:50 +0100
          Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs and dma changed David Howells <dhowells@redhat.com> - 2016-11-30 17:30 +0100
    Re: [PATCH] Lock down drivers that can have io ports, io mem, irqs and dma changed David Howells <dhowells@redhat.com> - 2016-11-29 11:50 +0100

csiph-web