Re: [PATCH v3 0/9] Qualcomm video decoder/encoder driver

From	Hans Verkuil <hverkuil@xs4all.nl>
Newsgroups	linux.kernel
Subject	Re: [PATCH v3 0/9] Qualcomm video decoder/encoder driver
Date	2016-11-14 16:10 +0100
Message-ID	<sDr3s-aQ-5@gated-at.bofh.it> (permalink)
References	<sAW3L-6lw-3@gated-at.bofh.it> <sCivg-3KY-21@gated-at.bofh.it> <sCiYi-4ee-9@gated-at.bofh.it> <sDqTL-8jU-7@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 11/14/2016 03:59 PM, Stanimir Varbanov wrote:
> Hi,
> 
> On 11/11/2016 02:11 PM, Javier Martinez Canillas wrote:
>> Hello Hans,
>>
>> On Fri, Nov 11, 2016 at 8:49 AM, Hans Verkuil <hverkuil@xs4all.nl> wrote:
>>> Hi Stanimir,
>>>
>>> Overall it looks good. As you saw, I do have some comments but nothing major.
>>>
>>> One question: you use qcom as the directory name. How about using qualcomm?
>>>
>>> It's really not that much longer and a bit more obvious.
>>>
>>> Up to you, though.
>>>
>>
>> It seems qcom is more consistent to the name used in most subsystems
>> for Qualcomm:
>>
>> $ find -name *qcom
>> ./arch/arm/mach-qcom
>> ./arch/arm64/boot/dts/qcom
>> ./Documentation/devicetree/bindings/soc/qcom
>> ./sound/soc/qcom
>> ./drivers/pinctrl/qcom
>> ./drivers/soc/qcom
>> ./drivers/clk/qcom
>>
>> $ find -name *qualcomm
>> ./drivers/net/ethernet/qualcomm
> 
> Also qcom is the vendor prefix used in [1]
> 
> [1] Documentation/devicetree/bindings/vendor-prefixes.txt
> 

qcom it is, then :-)

	Hans

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: [PATCH v3 0/9] Qualcomm video decoder/encoder driver Stanimir Varbanov <stanimir.varbanov@linaro.org> - 2016-11-14 16:00 +0100
  Re: [PATCH v3 0/9] Qualcomm video decoder/encoder driver Hans Verkuil <hverkuil@xs4all.nl> - 2016-11-14 16:10 +0100

csiph-web