Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1383363
| From | Jarkko Nikula <jarkko.nikula@linux.intel.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 3/4] i2c: designware-pcidrv: enable RuntimePM before registering to the core |
| Date | 2016-04-20 15:10 +0200 |
| Message-ID | <rq03h-8ot-31@gated-at.bofh.it> (permalink) |
| References | <rnP2i-1K8-7@gated-at.bofh.it> <rnP2j-1K8-11@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 04/14/2016 03:53 PM, Jisheng Zhang wrote:
> As pointed out by commit 36d48fb5766a ("i2c: designware-platdrv: enable
> RuntimePM before registering to the core"), "The core may register
> clients attached to this master which may use funtionality from the
> master", so enable RuntimePM before registering to the core.
>
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> ---
> drivers/i2c/busses/i2c-designware-pcidrv.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
> index 7368be0..41a01a7 100644
> --- a/drivers/i2c/busses/i2c-designware-pcidrv.c
> +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
> @@ -248,14 +248,17 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
> ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
> adap->nr = controller->bus_num;
>
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
> + pm_runtime_use_autosuspend(&pdev->dev);
> + pm_runtime_allow(&pdev->dev);
> +
> r = i2c_dw_probe(dev);
> - if (r)
> + if (r) {
> + pm_runtime_forbid(&pdev->dev);
> return r;
> + }
>
> - pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
> - pm_runtime_use_autosuspend(&pdev->dev);
> pm_runtime_put_autosuspend(&pdev->dev);
> - pm_runtime_allow(&pdev->dev);
>
Last time I checked this I didn't see urgent reason for the move because
runtime PM is enabled for PCI devices by default via pci_device_add() ->
pci_init_capabilities() -> pci_pm_init() -> pm_runtime_enable().
--
Jarkko
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH 3/4] i2c: designware-pcidrv: enable RuntimePM before registering to the core Jarkko Nikula <jarkko.nikula@linux.intel.com> - 2016-04-20 15:10 +0200
csiph-web