Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1368829

Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding

From Bjorn Andersson <bjorn.andersson@linaro.org>
Newsgroups linux.kernel
Subject Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding
Date 2016-03-31 23:30 +0200
Message-ID <riSkc-2AW-43@gated-at.bofh.it> (permalink)
References (2 earlier) <riLLJ-6lZ-29@gated-at.bofh.it> <riOqe-8lu-25@gated-at.bofh.it> <riOJz-8tH-5@gated-at.bofh.it> <riPvY-BA-31@gated-at.bofh.it> <riRHu-25a-57@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Thu 31 Mar 13:42 PDT 2016, Rob Herring wrote:

> On Thu, Mar 31, 2016 at 1:24 PM, Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> > On Thu 31 Mar 10:38 PDT 2016, Rob Herring wrote:
> >
> >> On Thu, Mar 31, 2016 at 12:16 PM, Bjorn Andersson
> >> <bjorn.andersson@linaro.org> wrote:
> >> > On Thu 31 Mar 07:28 PDT 2016, Rob Herring wrote:
> >> >
> >> >> On Mon, Mar 28, 2016 at 09:35:24PM -0700, Bjorn Andersson wrote:
> >> > [..]
> >>
> >> [...]
> >>
> >> >> > +
> >> >> > +== WiFi
> >> >> > +The following properties are defined to the WiFi node:
> >> >> > +
> >> >> > +- compatible:
> >> >> > +   Usage: required
> >> >> > +   Value type: <string>
> >> >> > +   Definition: must be one of:
> >> >> > +               "qcom,wcn3620-wlan",
> >> >> > +               "qcom,wcn3660-wlan",
> >> >> > +               "qcom,wcn3680-wlan"
> >> >
> >> > Digging through documentation and trying to answer the questions above
> >> > made me realize that these numbers are for the external rf component,
> >> > not the variants of the logic inside the SoC; and as such wrong.
> >>
> >> Do you need to know both? Or only the firmware image needs to know?
> >>
> >
> > So far I've only found cases where we need to know the register map for
> > the DMA engine shuffling packets, so this is related to the SoC-internal
> > part only.
> >
> > The differences in RF capabilities - at least for WiFi - seems to be
> > acquired in runtime from the firmware.
> >
> > The other piece that depend on the RF part seems to be the availability
> > of e.g. ANT support, so if anything that needs to go into the wcnss
> > node, in some way (either compatible or the set of subnodes).
> >
> >> >> > +
> >> >> > +- qcom,wcnss-mmio:
> >> >> > +   Usage: required
> >> >> > +   Value type: <prop-encoded-array>
> >> >> > +   Definition: should specify base address and size of the WiFi related
> >> >> > +               registers of WCNSS
> >> >>
> >> >> This is an address visible to the cpu?
> >> >>
> >> >
> >> > Yes it is; the device is controlled both through SMD and mmio accessible
> >> > registers, where the SMD interface is the primary interface.
> >> >
> >> > SMD being the primary "bus" I believe I can't use reg to denote this
> >> > register range. Should I describe this in some other form?
> >>
> >> That's a tricky one. I would create a node for the memory-mapped
> >> portion with proper compatible and reg properties, and then make this
> >> a phandle to that node. Something similar to how we do phandles to
> >> syscon's.
> >>
> >
> > Okay, sounds reasonable. I don't see a need for a specific
> > implementation, so I'll just back it with the generic syscon
> > implementation (and a specific compatible).
> 
> I don't think I'd do syscon here as it is mainly designed to have
> multiple users. You just need to look-up the phandle, perhaps check
> the compatible, and call of_address_to_resource to get the address.
> Actually, you could skip the phandle entirely and just find the node
> by compatible (assuming there is only one).
> 

Ahh, right. Thanks for the suggestion.

Regards,
Bjorn

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH 1/5] soc: qcom: smd: Make callback pass channel reference Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200
  [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200
    Re: [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the  other components Andy Gross <andy.gross@linaro.org> - 2016-03-31 20:50 +0200
      Re: [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the  other components Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-31 21:40 +0200
  [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200
    Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Rob Herring <robh@kernel.org> - 2016-03-31 16:30 +0200
      Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-31 19:20 +0200
        Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Rob Herring <robh@kernel.org> - 2016-03-31 19:40 +0200
          Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-31 20:30 +0200
            Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Rob Herring <robh@kernel.org> - 2016-03-31 22:50 +0200
              Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-31 23:30 +0200
  [PATCH 2/5] soc: qcom: smem: Use write-combine remap for SMEM Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200
    Re: [PATCH 2/5] soc: qcom: smem: Use write-combine remap for SMEM Andy Gross <andy.gross@linaro.org> - 2016-03-31 20:30 +0200
  [PATCH 5/5] ARM: dts: qcom: msm8974: Introduce pronto node Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200

csiph-web