Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1368704

Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding

Show all headers | View raw

On Thu, Mar 31, 2016 at 1:24 PM, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
> On Thu 31 Mar 10:38 PDT 2016, Rob Herring wrote:
>
>> On Thu, Mar 31, 2016 at 12:16 PM, Bjorn Andersson
>> <bjorn.andersson@linaro.org> wrote:
>> > On Thu 31 Mar 07:28 PDT 2016, Rob Herring wrote:
>> >
>> >> On Mon, Mar 28, 2016 at 09:35:24PM -0700, Bjorn Andersson wrote:
>> > [..]
>>
>> [...]
>>
>> >> > +
>> >> > +== WiFi
>> >> > +The following properties are defined to the WiFi node:
>> >> > +
>> >> > +- compatible:
>> >> > +   Usage: required
>> >> > +   Value type: <string>
>> >> > +   Definition: must be one of:
>> >> > +               "qcom,wcn3620-wlan",
>> >> > +               "qcom,wcn3660-wlan",
>> >> > +               "qcom,wcn3680-wlan"
>> >
>> > Digging through documentation and trying to answer the questions above
>> > made me realize that these numbers are for the external rf component,
>> > not the variants of the logic inside the SoC; and as such wrong.
>>
>> Do you need to know both? Or only the firmware image needs to know?
>>
>
> So far I've only found cases where we need to know the register map for
> the DMA engine shuffling packets, so this is related to the SoC-internal
> part only.
>
> The differences in RF capabilities - at least for WiFi - seems to be
> acquired in runtime from the firmware.
>
> The other piece that depend on the RF part seems to be the availability
> of e.g. ANT support, so if anything that needs to go into the wcnss
> node, in some way (either compatible or the set of subnodes).
>
>> >> > +
>> >> > +- qcom,wcnss-mmio:
>> >> > +   Usage: required
>> >> > +   Value type: <prop-encoded-array>
>> >> > +   Definition: should specify base address and size of the WiFi related
>> >> > +               registers of WCNSS
>> >>
>> >> This is an address visible to the cpu?
>> >>
>> >
>> > Yes it is; the device is controlled both through SMD and mmio accessible
>> > registers, where the SMD interface is the primary interface.
>> >
>> > SMD being the primary "bus" I believe I can't use reg to denote this
>> > register range. Should I describe this in some other form?
>>
>> That's a tricky one. I would create a node for the memory-mapped
>> portion with proper compatible and reg properties, and then make this
>> a phandle to that node. Something similar to how we do phandles to
>> syscon's.
>>
>
> Okay, sounds reasonable. I don't see a need for a specific
> implementation, so I'll just back it with the generic syscon
> implementation (and a specific compatible).

I don't think I'd do syscon here as it is mainly designed to have
multiple users. You just need to look-up the phandle, perhaps check
the compatible, and call of_address_to_resource to get the address.
Actually, you could skip the phandle entirely and just find the node
by compatible (assuming there is only one).

Rob

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH 1/5] soc: qcom: smd: Make callback pass channel reference Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200
  [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200
    Re: [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the  other components Andy Gross <andy.gross@linaro.org> - 2016-03-31 20:50 +0200
      Re: [PATCH 4/5] soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the  other components Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-31 21:40 +0200
  [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200
    Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Rob Herring <robh@kernel.org> - 2016-03-31 16:30 +0200
      Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-31 19:20 +0200
        Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Rob Herring <robh@kernel.org> - 2016-03-31 19:40 +0200
          Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-31 20:30 +0200
            Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Rob Herring <robh@kernel.org> - 2016-03-31 22:50 +0200
              Re: [PATCH 3/5] dt-binding: Add Qualcomm WCNSS control binding Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-31 23:30 +0200
  [PATCH 2/5] soc: qcom: smem: Use write-combine remap for SMEM Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200
    Re: [PATCH 2/5] soc: qcom: smem: Use write-combine remap for SMEM Andy Gross <andy.gross@linaro.org> - 2016-03-31 20:30 +0200
  [PATCH 5/5] ARM: dts: qcom: msm8974: Introduce pronto node Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-03-29 06:40 +0200

csiph-web