[PATCH] mmc: core: Fix bug on signal voltage switch failure

From	Naveen Kumar Parna <naveenkumar.parna@gmail.com>
Newsgroups	linux.kernel
Subject	[PATCH] mmc: core: Fix bug on signal voltage switch failure
Date	2016-03-31 16:20 +0200
Message-ID	<riLC1-6ib-1@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

When switching SD and SDIO cards from 3.3V to 1.8V signal level fails, a bug in sdhci_set_power() will trigger.
To fix the kernel crash during recovery from signal voltage switch failure, OCR should be reset to avail voltage mask before power-cycle the card.

Signed-off-by: Naveen Kumar Parna <naveenkumar.parna@gmail.com>
---
 drivers/mmc/core/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f26a5f1..e7eb427 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1477,6 +1477,8 @@ power_cycle:
 	if (err) {
 		pr_debug("%s: Signal voltage switch failed, "
 			"power cycling card\n", mmc_hostname(host));
+		/* Reset OCR mask */
+		ocr =  host->ocr_avail;
 		mmc_power_cycle(host, ocr);
 	}
 
-- 
1.9.1

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH] mmc: core: Fix bug on signal voltage switch failure Naveen Kumar Parna <naveenkumar.parna@gmail.com> - 2016-03-31 16:20 +0200
  Re: [PATCH] mmc: core: Fix bug on signal voltage switch failure Adrian Hunter <adrian.hunter@intel.com> - 2016-04-01 09:40 +0200
    Re: [PATCH] mmc: core: Fix bug on signal voltage switch failure Naveen Kumar P <naveenkumar.parna@gmail.com> - 2016-04-01 10:50 +0200

csiph-web