Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file

From	Krzysztof Kozlowski <k.kozlowski@samsung.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi file
Date	2016-03-15 03:50 +0100
Message-ID	<rcNdw-49L-7@gated-at.bofh.it> (permalink)
References	<rcMAN-3SR-3@gated-at.bofh.it> <rcN3Q-459-21@gated-at.bofh.it> <rcNdv-49L-3@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 15.03.2016 11:39, Chanwoo Choi wrote:
> On 2016년 03월 15일 11:35, Krzysztof Kozlowski wrote:
>> On 15.03.2016 11:08, Chanwoo Choi wrote:
>>> This patchset add the support for Device Tree source for Samsung ARTIK5 module[1]
>>> based on Exynos3250 SoC and development board[2]. The ARTIK5 module includes
>>> the follwoing devices:
>>> - Application Processor (Samsung Exynos3250)
>>> - WiFi/BT Combo chip
>>> - PMIC (Samsung S2MPS14)
>>> - eMMC (4GB)
>>> - DRAM LPDDR3 (512MB)
>>> - Connectors pin (60 Pins x 3 set)
>>>
>>> Also, this patchset add the ARTIK5 development board[2] dts file which includes
>>> the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
>>> ethernet port, uart port and so on.
>>>
>>> [1] https://www.artik.io/hardware/artik-5
>>> [2] http://www.digikey.com/product-detail/en/SIP-KITNXB001/1510-1316-ND/5825102
>>
>> I guess the rest of patches depend on new clocks, right?
> 
> Yes. The new clocks(uart2, mmc2) are used for artik5 module.
> - uart2 is used for serial log for debug
> - mmc2 is for external sd card

Okay, so an ack from clock folks or a tag to pull would be nice.

Unfortunately merge window started so probably everything will wait...

BR,
Krzysztof

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi  file Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:10 +0100
  [PATCH v2 3/7] ARM: dts: Add UART2 dt node for Exynos3250 SoC Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:10 +0100
  [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for  exynos3250-monk Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:10 +0100
    Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device  for exynos3250-monk Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:40 +0100
    Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device  for exynos3250-monk kbuild test robot <lkp@intel.com> - 2016-03-15 05:20 +0100
      Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device  for exynos3250-monk Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 05:30 +0100
  [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for  exynos3250-artik5-eval board Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:10 +0100
    Re: [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for  exynos3250-artik5-eval board Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:40 +0100
  [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5  module Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:20 +0100
    Re: [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for  ARTIK5 module Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:40 +0100
      Re: [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for  ARTIK5 module Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:50 +0100
  Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module  dtsi file Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:40 +0100
    Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module  dtsi file Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:50 +0100
      Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module  dtsi file Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:50 +0100

csiph-web