Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1357761

Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk

From Krzysztof Kozlowski <k.kozlowski@samsung.com>
Newsgroups linux.kernel
Subject Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
Date 2016-03-15 03:40 +0100
Message-ID <rcN3P-459-1@gated-at.bofh.it> (permalink)
References <rcMAN-3SR-3@gated-at.bofh.it> <rcMAO-3SR-15@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw

On 15.03.2016 11:08, Chanwoo Choi wrote:
> This patch adds initial pin configuration of MMC2 device on exynos3250-monk
> board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state.
> 
> Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
>

The patch should go in before setting these pins to MMC2 (so before
patch 4/7) so there won't be any change in behaviour.

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>



Best regards,

Krzysztof

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module dtsi  file Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:10 +0100
  [PATCH v2 3/7] ARM: dts: Add UART2 dt node for Exynos3250 SoC Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:10 +0100
  [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device for  exynos3250-monk Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:10 +0100
    Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device  for exynos3250-monk Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:40 +0100
    Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device  for exynos3250-monk kbuild test robot <lkp@intel.com> - 2016-03-15 05:20 +0100
      Re: [PATCH v2 7/7] ARM: dts: Add initial gpio setting of MMC2 device  for exynos3250-monk Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 05:30 +0100
  [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for  exynos3250-artik5-eval board Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:10 +0100
    Re: [PATCH v2 6/7] ARM: dts: Add MSHC2 dt node for SD card for  exynos3250-artik5-eval board Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:40 +0100
  [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5  module Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:20 +0100
    Re: [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for  ARTIK5 module Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:40 +0100
      Re: [PATCH v2 5/7] ARM: dts: Add exynos3250-artik5 dtsi file for  ARTIK5 module Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:50 +0100
  Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module  dtsi file Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:40 +0100
    Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module  dtsi file Chanwoo Choi <cw00.choi@samsung.com> - 2016-03-15 03:50 +0100
      Re: [PATCH v2 0/7] ARM: dts: Add new Exynos3250-based ARTIK5 module  dtsi file Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-03-15 03:50 +0100

csiph-web