Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1356450
| From | Phil Reid <preid@electromag.com.au> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit |
| Date | 2016-03-12 16:30 +0100 |
| Message-ID | <rbTEl-8aZ-9@gated-at.bofh.it> (permalink) |
| References | <rbygy-y0-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 12/03/2016 12:31 AM, Geert Uytterhoeven wrote:
> pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes,
> which assumes a 32-bit platform, and is not correct on 64-bit platforms.
> Use "sizeof(...)" instead to fix this.
>
> Fixes: b4818afeacbd8182 ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Phil Reid <preid@electromag.com.au>
> ---
> Untested, found by code inspection.
>
> This bug was introduced in v4.5-rc1, but unless Linus (the other one ;-)
> will make a v4.5-rc8, it's probably too late to get this fixed in v4.5.
> ---
> drivers/gpio/gpio-pca953x.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
> index 23196c5fc17ceb6b..99b375c959987fe9 100644
> --- a/drivers/gpio/gpio-pca953x.c
> +++ b/drivers/gpio/gpio-pca953x.c
> @@ -367,9 +367,11 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
> memcpy(reg_val, chip->reg_output, NBANK(chip));
> mutex_lock(&chip->i2c_lock);
> for(bank=0; bank<NBANK(chip); bank++) {
> - unsigned bankmask = mask[bank/4] >> ((bank % 4) * 8);
> + unsigned bankmask = mask[bank / sizeof(*mask)] >>
> + ((bank % sizeof(*mask)) * 8);
> if(bankmask) {
> - unsigned bankval = bits[bank/4] >> ((bank % 4) * 8);
> + unsigned bankval = bits[bank / sizeof(*bits)] >>
> + ((bank % sizeof(*bits)) * 8);
> reg_val[bank] = (reg_val[bank] & ~bankmask) | bankval;
> }
> }
>
--
Regards
Phil Reid
ElectroMagnetic Imaging Technology Pty Ltd
Development of Geophysical Instrumentation & Software
www.electromag.com.au
3 The Avenue, Midland WA 6056, AUSTRALIA
Ph: +61 8 9250 8100
Fax: +61 8 9250 7100
Email: preid@electromag.com.au
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH] gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit Geert Uytterhoeven <geert+renesas@glider.be> - 2016-03-11 17:40 +0100 Re: [PATCH] gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit Phil Reid <preid@electromag.com.au> - 2016-03-12 16:30 +0100 Re: [PATCH] gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit Linus Walleij <linus.walleij@linaro.org> - 2016-03-16 13:10 +0100
csiph-web