Groups > linux.kernel > #1452072

Re: v4.1 to v4.7: regression in tsc2005 driver

From	Pavel Machek <pavel@ucw.cz>
Newsgroups	linux.kernel
Subject	Re: v4.1 to v4.7: regression in tsc2005 driver
Date	2016-07-28 21:40 +0200
Message-ID	<rZZjX-2cG-19@gated-at.bofh.it> (permalink)
References	(5 earlier) <rWTb4-6fy-11@gated-at.bofh.it> <rX2xI-3I2-5@gated-at.bofh.it> <rX7xn-6RW-1@gated-at.bofh.it> <rXfOh-3JM-1@gated-at.bofh.it> <rYPwn-5P2-39@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Hi!

On Mon 2016-07-25 16:56:20, Pali Rohár wrote:
> On Thursday 21 July 2016 08:32:34 Pavel Machek wrote:
> > Ok.. so out of the box, touchscreen is "upside down" and miscalibrated
> > on n900. So I need to run
> > 
> > xinput --set-prop --type=float 8 115  1.10 0.00 -0.05  0.00 1.18 -0.10 0.00 0.00 1.00
> > xinput --set-prop --type=int 8 249 0 1
> 
> What these commands do? Or how they change driver behavior?

> As Dmitry wrote, it is possible to move at list "upside down" switch to
> kernel/DTS? I think that every N900 touchscreen acts "upside down" by
> default...

I don't think that's enough. Its upside down + slightly shifted. If
you have time you can try, but...

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: v4.1 to v4.7: regression in tsc2005 driver Pavel Machek <pavel@ucw.cz> - 2016-07-28 21:40 +0200

csiph-web