Re: [PATCH] ARM: dts: NSP: Correct RAM amount for BCM958625HR board

From	Jon Mason <jon.mason@broadcom.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH] ARM: dts: NSP: Correct RAM amount for BCM958625HR board
Date	2016-07-14 20:20 +0200
Message-ID	<rUToS-4Fx-17@gated-at.bofh.it> (permalink)
References	<rUx50-6Li-31@gated-at.bofh.it> <rUzTd-b7-43@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Wed, Jul 13, 2016 at 5:23 PM, Florian Fainelli <f.fainelli@gmail.com> wrote:
> On 07/13/2016 11:18 AM, Jon Mason wrote:
>> The BCM958625HR board has 2GB of RAM available.  Increase the amount
>> from 512MB to 2GB and add the device type to the memory entry.
>>
>> Signed-off-by: Jon Mason <jon.mason@broadcom.com>
>> ---
>>  arch/arm/boot/dts/bcm958625hr.dts | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
>> index 4239e58..66c658a 100644
>> --- a/arch/arm/boot/dts/bcm958625hr.dts
>> +++ b/arch/arm/boot/dts/bcm958625hr.dts
>> @@ -47,7 +47,8 @@
>>       };
>>
>>       memory {
>> -             reg = <0x60000000 0x20000000>;
>> +             device_type = "memory";
>> +             reg = <0x60000000 0x40000000>;
>
> That's just one 1GB, did you intend to provide 0x8000_0000 instead here?

Good catch!  I'll fix that up in v2 (and add a "Fixes:" referencing
the original patch).

Thanks,
Jon

> --
> Florian

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH] ARM: dts: NSP: Correct RAM amount for BCM958625HR board Jon Mason <jon.mason@broadcom.com> - 2016-07-13 20:30 +0200
  Re: [PATCH] ARM: dts: NSP: Correct RAM amount for BCM958625HR board Florian Fainelli <f.fainelli@gmail.com> - 2016-07-13 23:30 +0200
    Re: [PATCH] ARM: dts: NSP: Correct RAM amount for BCM958625HR board Jon Mason <jon.mason@broadcom.com> - 2016-07-14 20:20 +0200

csiph-web