Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1436849
| From | Krzysztof Kozlowski <k.kozlowski@samsung.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [RFC PATCH 2/2] rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() |
| Date | 2016-07-05 11:00 +0200 |
| Message-ID | <rRun0-ty-19@gated-at.bofh.it> (permalink) |
| References | <rR9Vg-4SC-11@gated-at.bofh.it> <rR9Vg-4SC-9@gated-at.bofh.it> <rRtKi-g7-29@gated-at.bofh.it> <rRun0-ty-21@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 07/05/2016 10:52 AM, Alim Akhtar wrote:
>
>
> On 07/05/2016 01:46 PM, Krzysztof Kozlowski wrote:
>> On 07/04/2016 01:03 PM, Alim Akhtar wrote:
>>> As per code flow it is possible that s3c_rtc_setfreq() might get called
>>> with rtc clock disabled and in set_freq we perform h/w registers
>>> read/write,
>>> which might results in a kernel crash while probing rtc driver.
>>> Below is one such case:
>>> s3c_rtc_probe()
>>> clk_prepare_enable(info->rtc_clk) // rtc clock enabled
>>> s3c_rtc_gettime() // will enable clk if not done, and disable
>>> it upon exit
>>> s3c_rtc_setfreq() //then this will be called with clk disabled
>>
>> The indentation suggests levels of calls (chain) not sequence. This
>> should be:
>> s3c_rtc_probe()
>> clk_prepare_enable(info->rtc_clk) // rtc clock enabled
>> s3c_rtc_gettime() // will enable clk if not done, and disable it
>> upon exit
>> s3c_rtc_setfreq() //then this will be called with clk disabled
>>
>>>
>>> This patch take cares of such issue by adding
>>> s3c_rtc_{enable/disable}_clk in
>>> s3c_rtc_setfreq().
>>
>> What I don't get is that you wrote "it is *possible* that
>> s3c_rtc_setfreq() *might* get called". From my understanding this will
>> happen always because src_rtc_gettime() always disables the clocks.
>>
>> Why it does not happen always?
>>
>
> Yes, you are right, it is always disabled when reaches s3c_rtc_setfreq().
> And I observed a kernel crash while testing on exynos7 platform in
> s3c_rtc_setfreq() because clock was always disabled at this point. And
> this patches fixes this issue.
Ok, thanks! Could you adjust the commit message mentioning that it
always causes crash on Exynos 7 platform and adding:
Fixes: 24e1455493da ("drivers/rtc/rtc-s3c.c: delete duplicate clock
control")
Cc: <stable@vger.kernel.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[RFC PATCH 2/2] rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() Alim Akhtar <alim.akhtar@samsung.com> - 2016-07-04 13:10 +0200
Re: [RFC PATCH 2/2] rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-07-05 10:20 +0200
Re: [RFC PATCH 2/2] rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-07-05 11:00 +0200
Re: [RFC PATCH 2/2] rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() "pankaj.dubey" <pankaj.dubey@samsung.com> - 2016-07-05 11:50 +0200
Re: [RFC PATCH 2/2] rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() Alim Akhtar <alim.akhtar@samsung.com> - 2016-07-05 11:00 +0200
Re: [RFC PATCH 2/2] rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq() "pankaj.dubey" <pankaj.dubey@samsung.com> - 2016-07-05 11:50 +0200
csiph-web