Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1433567
| From | Peter Chen <hzpeterchen@gmail.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH 16/21] usb: chipidea: msm: Restore wrapper settings after reset |
| Date | 2016-06-29 10:40 +0200 |
| Message-ID | <rPjcm-1RY-39@gated-at.bofh.it> (permalink) |
| References | <rOcFX-8ei-3@gated-at.bofh.it> <rOcPE-8ip-25@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On Sun, Jun 26, 2016 at 12:28:33AM -0700, Stephen Boyd wrote:
> When the RESET bit is set in the USBCMD register it resets quite
> a few of the wrapper's registers to their reset state. This
> includes the GENCONFIG and GENCONFIG2 registers. Currently this
> is done by the usb phy and ehci-msm drivers writing into the
> controller wrapper's MMIO address space. Let's consolidate the
> register writes into the wrapper driver instead so that we
> clearly split the wrapper from the phys.
>
> Cc: Peter Chen <peter.chen@nxp.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
> ---
> drivers/usb/chipidea/ci_hdrc_msm.c | 46 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
> index df0f8b31db4f..cc6f9b0df9d5 100644
> --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> @@ -14,6 +14,8 @@
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
> #include <linux/io.h>
> +#include <linux/extcon.h>
> +#include <linux/of.h>
>
> #include "ci.h"
>
> @@ -21,11 +23,22 @@
> #define HS_PHY_SEC_CTRL 0x0278
> # define HS_PHY_DIG_CLAMP_N BIT(16)
>
> +#define HS_PHY_GENCONFIG 0x009c
> +# define HS_PHY_TXFIFO_IDLE_FORCE_DIS BIT(4)
> +
> +#define HS_PHY_GENCONFIG_2 0x00a0
> +# define HS_PHY_SESS_VLD_CTRL_EN BIT(7)
> +# define HS_PHY_ULPI_TX_PKT_EN_CLR_FIX BIT(19)
> +
> +#define HSPHY_SESS_VLD_CTRL BIT(25)
> +
Keep alignment please.
> struct ci_hdrc_msm {
> struct platform_device *ci;
> struct clk *core_clk;
> struct clk *iface_clk;
> + struct extcon_dev *vbus_edev;
> bool secondary_phy;
> + bool hsic;
> void __iomem *base;
> };
>
> @@ -39,9 +52,26 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
> dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
> /* use AHB transactor, allow posted data writes */
> hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
> + /* workaround for rx buffer collision issue */
> + hw_write_id_reg(ci, HS_PHY_GENCONFIG,
> + HS_PHY_TXFIFO_IDLE_FORCE_DIS, 0);
> +
> if (msm_ci->secondary_phy)
> hw_write_id_reg(ci, HS_PHY_SEC_CTRL, HS_PHY_DIG_CLAMP_N,
> HS_PHY_DIG_CLAMP_N);
> +
> + if (!msm_ci->hsic)
> + hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
> + HS_PHY_ULPI_TX_PKT_EN_CLR_FIX, 0);
> +
> + if (msm_ci->vbus_edev) {
> + hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
> + HS_PHY_SESS_VLD_CTRL_EN,
> + HS_PHY_SESS_VLD_CTRL_EN);
> + hw_write(ci, OP_USBCMD, HSPHY_SESS_VLD_CTRL,
> + HSPHY_SESS_VLD_CTRL);
> +
> + }
> break;
> default:
> dev_dbg(dev, "unknown ci_hdrc event\n");
> @@ -112,6 +142,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
> void __iomem *base;
> resource_size_t size;
> int ret;
> + struct device_node *ulpi_node, *phy_node;
>
> dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
>
> @@ -141,6 +172,13 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
> if (!base)
> return -ENOMEM;
>
> + ci->vbus_edev = extcon_get_edev_by_phandle(&pdev->dev, 0);
> + if (IS_ERR(ci->vbus_edev)) {
> + if (PTR_ERR(ci->vbus_edev) != -ENODEV)
> + return PTR_ERR(ci->vbus_edev);
> + ci->vbus_edev = NULL;
> + }
> +
Why not using ci->platdata->vbus_extcon directly?
> reset_control_assert(reset);
> usleep_range(10000, 12000);
> reset_control_deassert(reset);
> @@ -157,6 +195,14 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
> if (ret)
> goto err_mux;
>
> + ulpi_node = of_find_node_by_name(pdev->dev.of_node, "ulpi");
> + if (ulpi_node) {
> + phy_node = of_get_next_available_child(ulpi_node, NULL);
> + ci->hsic = of_device_is_compatible(phy_node, "qcom,usb-hsic-phy");
> + of_node_put(phy_node);
> + }
> + of_node_put(ulpi_node);
> +
Just confirm with you that ci->platdata->phy_mode is not enough?
> plat_ci = ci_hdrc_add_device(&pdev->dev, pdev->resource,
> pdev->num_resources, &ci_hdrc_msm_platdata);
> if (IS_ERR(plat_ci)) {
> --
> 2.9.0.rc2.8.ga28705d
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Best Regards,
Peter Chen
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 00/21] Support qcom's HSIC USB and rewrite USB2 HS phy support Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:30 +0200
[PATCH 13/21] usb: chipidea: msm: Allow core to get usb phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:30 +0200
Re: [PATCH 13/21] usb: chipidea: msm: Allow core to get usb phy Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 09:00 +0200
Re: [PATCH 13/21] usb: chipidea: msm: Allow core to get usb phy Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 13:50 +0200
Re: [PATCH 13/21] usb: chipidea: msm: Allow core to get usb phy Peter Chen <hzpeterchen@gmail.com> - 2016-06-30 04:00 +0200
[PATCH 09/21] usb: chipidea: Add support for ULPI PHY bus Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 09/21] usb: chipidea: Add support for ULPI PHY bus Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 08:40 +0200
[PATCH 14/21] usb: chipidea: msm: Add proper clk and reset support Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 14/21] usb: chipidea: msm: Add proper clk and reset support Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 09:10 +0200
[PATCH 07/21] usb: chipidea: Notify of reset when switching into host mode Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
[PATCH 06/21] usb: chipidea: Initialize and reinitialize phy later Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 06/21] usb: chipidea: Initialize and reinitialize phy later Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 04:40 +0200
Re: [PATCH 06/21] usb: chipidea: Initialize and reinitialize phy later Peter Chen <hzpeterchen@gmail.com> - 2016-06-30 03:30 +0200
[PATCH 19/21] usb: chipidea: msm: Be silent on probe defer errors Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 19/21] usb: chipidea: msm: Be silent on probe defer errors Peter Chen <hzpeterchen@gmail.com> - 2016-06-30 03:30 +0200
[PATCH 03/21] usb: ulpi: Avoid reading/writing in device creation with OF devices Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
[PATCH 20/21] phy: Add support for Qualcomm's USB HSIC phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 20/21] phy: Add support for Qualcomm's USB HSIC phy Neil Armstrong <narmstrong@baylibre.com> - 2016-06-28 10:50 +0200
Re: [PATCH 20/21] phy: Add support for Qualcomm's USB HSIC phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-29 00:10 +0200
Re: [PATCH 20/21] phy: Add support for Qualcomm's USB HSIC phy Neil Armstrong <narmstrong@baylibre.com> - 2016-06-29 11:20 +0200
Re: [PATCH 20/21] phy: Add support for Qualcomm's USB HSIC phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-29 21:00 +0200
[PATCH 05/21] usb: chipidea: Handle extcon events properly Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 05/21] usb: chipidea: Handle extcon events properly Peter Chen <hzpeterchen@gmail.com> - 2016-06-28 12:10 +0200
[PATCH 08/21] usb: chipidea: Kick OTG state machine for AVVIS with vbus extcon Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 08/21] usb: chipidea: Kick OTG state machine for AVVIS with vbus extcon Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 05:20 +0200
Re: [PATCH 08/21] usb: chipidea: Kick OTG state machine for AVVIS with vbus extcon Peter Chen <hzpeterchen@gmail.com> - 2016-06-30 03:40 +0200
RE: [PATCH 08/21] usb: chipidea: Kick OTG state machine for AVVIS with vbus extcon Jun Li <jun.li@nxp.com> - 2016-06-30 04:10 +0200
[PATCH 18/21] usb: chipidea: msm: Add reset controller for PHY POR bit Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 18/21] usb: chipidea: msm: Add reset controller for PHY POR bit kbuild test robot <lkp@intel.com> - 2016-06-27 05:50 +0200
Re: [PATCH 18/21] usb: chipidea: msm: Add reset controller for PHY POR bit kbuild test robot <lkp@intel.com> - 2016-06-27 07:00 +0200
Re: [PATCH 18/21] usb: chipidea: msm: Add reset controller for PHY POR bit kbuild test robot <lkp@intel.com> - 2016-06-27 10:00 +0200
Re: [PATCH 18/21] usb: chipidea: msm: Add reset controller for PHY POR bit Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 14:00 +0200
[PATCH 02/21] usb: ulpi: Support device discovery via DT Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 02/21] usb: ulpi: Support device discovery via DT kbuild test robot <lkp@intel.com> - 2016-06-27 06:20 +0200
Re: [PATCH 02/21] usb: ulpi: Support device discovery via DT Heikki Krogerus <heikki.krogerus@linux.intel.com> - 2016-06-27 16:40 +0200
Re: [PATCH 02/21] usb: ulpi: Support device discovery via DT Heikki Krogerus <heikki.krogerus@linux.intel.com> - 2016-06-28 13:50 +0200
Re: [PATCH 02/21] usb: ulpi: Support device discovery via DT Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 04:10 +0200
Re: [PATCH 02/21] usb: ulpi: Support device discovery via DT Rob Herring <robh@kernel.org> - 2016-06-28 23:00 +0200
Re: [PATCH 02/21] usb: ulpi: Support device discovery via DT Rob Herring <robh@kernel.org> - 2016-07-01 03:10 +0200
[PATCH 15/21] usb: chipidea: msm: Mux over secondary phy at the right time Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 15/21] usb: chipidea: msm: Mux over secondary phy at the right time Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-06-28 07:00 +0200
Re: [PATCH 15/21] usb: chipidea: msm: Mux over secondary phy at the right time Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 10:20 +0200
Re: [PATCH 15/21] usb: chipidea: msm: Mux over secondary phy at the right time Peter Chen <hzpeterchen@gmail.com> - 2016-06-30 04:00 +0200
[PATCH 16/21] usb: chipidea: msm: Restore wrapper settings after reset Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 16/21] usb: chipidea: msm: Restore wrapper settings after reset Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 10:40 +0200
Re: [PATCH 16/21] usb: chipidea: msm: Restore wrapper settings after reset Peter Chen <hzpeterchen@gmail.com> - 2016-06-30 11:10 +0200
Re: [PATCH 16/21] usb: chipidea: msm: Restore wrapper settings after reset Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-30 18:30 +0200
[PATCH 11/21] usb: chipidea: msm: Use hw_write_id_reg() instead of writel directly Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 11/21] usb: chipidea: msm: Use hw_write_id_reg() instead of writel directly Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 08:50 +0200
[PATCH 21/21] phy: Add support for Qualcomm's USB HS phy Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
[PATCH 17/21] usb: chipidea: msm: Make platform data driver local instead of global Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 17/21] usb: chipidea: msm: Make platform data driver local instead of global Peter Chen <hzpeterchen@gmail.com> - 2016-06-29 13:40 +0200
Re: [PATCH 17/21] usb: chipidea: msm: Make platform data driver local instead of global Peter Chen <hzpeterchen@gmail.com> - 2016-06-30 11:20 +0200
[PATCH 01/21] of: device: Support loading a module with OF based modalias Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
Re: [PATCH 01/21] of: device: Support loading a module with OF based modalias Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-06-28 06:20 +0200
[PATCH 04/21] usb: chipidea: Only read/write OTGSC from one place Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-26 09:40 +0200
RE: [PATCH 04/21] usb: chipidea: Only read/write OTGSC from one place Jun Li <jun.li@nxp.com> - 2016-06-27 10:10 +0200
RE: [PATCH 04/21] usb: chipidea: Only read/write OTGSC from one place Stephen Boyd <stephen.boyd@linaro.org> - 2016-06-27 21:10 +0200
Re: [PATCH 04/21] usb: chipidea: Only read/write OTGSC from one place Peter Chen <hzpeterchen@gmail.com> - 2016-06-28 11:50 +0200
Re: [PATCH 00/21] Support qcom's HSIC USB and rewrite USB2 HS phy support John Stultz <john.stultz@linaro.org> - 2016-06-28 05:10 +0200
Re: [PATCH 00/21] Support qcom's HSIC USB and rewrite USB2 HS phy support John Stultz <john.stultz@linaro.org> - 2016-07-02 08:10 +0200
Re: [PATCH 00/21] Support qcom's HSIC USB and rewrite USB2 HS phy support John Stultz <john.stultz@linaro.org> - 2016-07-05 21:40 +0200
csiph-web