Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1426341

Re: [PATCH v9 2/4] power: reset: add reboot mode driver

Show all headers | View raw

On 06/20/2016 08:38 AM, Andy Yan wrote:
> This driver parses the reboot commands like "reboot bootloader"
> and "reboot recovery" to get a boot mode described in the
> device tree , then call the write interfae to store the boot
> mode in some place like special register or sram, which can
> be read by the bootloader after system reboot, then the bootloader
> can take different action according to the mode stored.
> 
> This is commonly used on Android based devices, in order to
> reboot the device into fastboot or recovery mode.
> 
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
> Tested-by: John Stultz <john.stultz@linaro.org>
> Acked-by: John Stultz <john.stultz@linaro.org>
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> 
> ---
> 
> Changes in v9:
> - select MFD_SYSCON when syscon-reboot-mode driver enabled
> - refactoring error handling in reboot_mode_register
> 
> Changes in v8:
> - do some cleanup when driver ubind
> 
> Changes in v7:
> - address some suggestions from Krzysztof, make syscon-reboot-mode driver data self-contained.
> 
> Changes in v6: None
> Changes in v5:
> - use two blank space under help in Kconfig
> - use unsigned int instead of int for member magic in struct mode_info
> 
> Changes in v4:
> - make this driver depends on OF to avoid kbuild test error
> 
> Changes in v3:
> - scan multi properities
> - add mask value for some platform which only use some bits of the register
>   to store boot mode magic value
> 
> Changes in v2:
> - move to dir drivers/power/reset/
> - make syscon-reboot-mode a generic driver
> 
> Changes in v1:
> - fix the embarrassed compile warning
> - correct the maskrom magic number
> - check for the normal reboot
> 
>  drivers/power/reset/Kconfig              |  14 ++++
>  drivers/power/reset/Makefile             |   2 +
>  drivers/power/reset/reboot-mode.c        | 128 +++++++++++++++++++++++++++++++
>  drivers/power/reset/reboot-mode.h        |  14 ++++
>  drivers/power/reset/syscon-reboot-mode.c | 100 ++++++++++++++++++++++++
>  5 files changed, 258 insertions(+)
>  create mode 100644 drivers/power/reset/reboot-mode.c
>  create mode 100644 drivers/power/reset/reboot-mode.h
>  create mode 100644 drivers/power/reset/syscon-reboot-mode.c
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 9bb2622..4ceaf74 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -183,5 +183,19 @@ config POWER_RESET_ZX
>  	help
>  	  Reboot support for ZTE SoCs.
>  
> +config REBOOT_MODE
> +	tristate
> +
> +config SYSCON_REBOOT_MODE
> +	bool "Generic SYSCON regmap reboot mode driver"

Why not tristate?

Beside that the patch looks good.

Best regards,
Krzysztof

> +	depends on OF
> +	select REBOOT_MODE
> +	select MFD_SYSCON
> +	help
> +	  Say y here will enable reboot mode driver. This will
> +	  get reboot mode arguments and store it in SYSCON mapped
> +	  register, then the bootloader can read it to take different
> +	  action according to the mode.
> +

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH v9 2/4] power: reset: add reboot mode driver Andy Yan <andy.yan@rock-chips.com> - 2016-06-20 08:50 +0200
  Re: [PATCH v9 2/4] power: reset: add reboot mode driver Andy Yan <andy.yan@rock-chips.com> - 2016-06-20 10:30 +0200
    Re: [PATCH v9 2/4] power: reset: add reboot mode driver Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-20 14:50 +0200
      Re: [PATCH v9 2/4] power: reset: add reboot mode driver Paul Gortmaker <paul.gortmaker@windriver.com> - 2016-06-20 16:50 +0200
        Re: [PATCH v9 2/4] power: reset: add reboot mode driver Andy Yan <andy.yan@rock-chips.com> - 2016-06-21 08:30 +0200
          Re: [PATCH v9 2/4] power: reset: add reboot mode driver Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-21 11:40 +0200
  Re: [PATCH v9 2/4] power: reset: add reboot mode driver Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-20 10:50 +0200

csiph-web