Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1426321

Re: [PATCH v9 2/4] power: reset: add reboot mode driver

Show all headers | View raw

Hi Krzysztof:

On 2016年06月20日 16:09, Krzysztof Kozlowski wrote:
> On 06/20/2016 08:38 AM, Andy Yan wrote:
>> This driver parses the reboot commands like "reboot bootloader"
>> and "reboot recovery" to get a boot mode described in the
>> device tree , then call the write interfae to store the boot
>> mode in some place like special register or sram, which can
>> be read by the bootloader after system reboot, then the bootloader
>> can take different action according to the mode stored.
>>
>> This is commonly used on Android based devices, in order to
>> reboot the device into fastboot or recovery mode.
>>
>> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
>> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
>> Tested-by: John Stultz <john.stultz@linaro.org>
>> Acked-by: John Stultz <john.stultz@linaro.org>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>>
>> ---
>>
>> Changes in v9:
>> - select MFD_SYSCON when syscon-reboot-mode driver enabled
>> - refactoring error handling in reboot_mode_register
>>
>> Changes in v8:
>> - do some cleanup when driver ubind
>>
>> Changes in v7:
>> - address some suggestions from Krzysztof, make syscon-reboot-mode driver data self-contained.
>>
>> Changes in v6: None
>> Changes in v5:
>> - use two blank space under help in Kconfig
>> - use unsigned int instead of int for member magic in struct mode_info
>>
>> Changes in v4:
>> - make this driver depends on OF to avoid kbuild test error
>>
>> Changes in v3:
>> - scan multi properities
>> - add mask value for some platform which only use some bits of the register
>>    to store boot mode magic value
>>
>> Changes in v2:
>> - move to dir drivers/power/reset/
>> - make syscon-reboot-mode a generic driver
>>
>> Changes in v1:
>> - fix the embarrassed compile warning
>> - correct the maskrom magic number
>> - check for the normal reboot
>>
>>   drivers/power/reset/Kconfig              |  14 ++++
>>   drivers/power/reset/Makefile             |   2 +
>>   drivers/power/reset/reboot-mode.c        | 128 +++++++++++++++++++++++++++++++
>>   drivers/power/reset/reboot-mode.h        |  14 ++++
>>   drivers/power/reset/syscon-reboot-mode.c | 100 ++++++++++++++++++++++++
>>   5 files changed, 258 insertions(+)
>>   create mode 100644 drivers/power/reset/reboot-mode.c
>>   create mode 100644 drivers/power/reset/reboot-mode.h
>>   create mode 100644 drivers/power/reset/syscon-reboot-mode.c
>>
>> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
>> index 9bb2622..4ceaf74 100644
>> --- a/drivers/power/reset/Kconfig
>> +++ b/drivers/power/reset/Kconfig
>> @@ -183,5 +183,19 @@ config POWER_RESET_ZX
>>   	help
>>   	  Reboot support for ZTE SoCs.
>>   
>> +config REBOOT_MODE
>> +	tristate
>> +
>> +config SYSCON_REBOOT_MODE
>> +	bool "Generic SYSCON regmap reboot mode driver"
> Why not tristate?

    I see many reset drivers in this directories  use bool, so I follow 
them.
>
> Beside that the patch looks good.
>
> Best regards,
> Krzysztof
>
>> +	depends on OF
>> +	select REBOOT_MODE
>> +	select MFD_SYSCON
>> +	help
>> +	  Say y here will enable reboot mode driver. This will
>> +	  get reboot mode arguments and store it in SYSCON mapped
>> +	  register, then the bootloader can read it to take different
>> +	  action according to the mode.
>> +
>
>
>

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v9 2/4] power: reset: add reboot mode driver Andy Yan <andy.yan@rock-chips.com> - 2016-06-20 08:50 +0200
  Re: [PATCH v9 2/4] power: reset: add reboot mode driver Andy Yan <andy.yan@rock-chips.com> - 2016-06-20 10:30 +0200
    Re: [PATCH v9 2/4] power: reset: add reboot mode driver Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-20 14:50 +0200
      Re: [PATCH v9 2/4] power: reset: add reboot mode driver Paul Gortmaker <paul.gortmaker@windriver.com> - 2016-06-20 16:50 +0200
        Re: [PATCH v9 2/4] power: reset: add reboot mode driver Andy Yan <andy.yan@rock-chips.com> - 2016-06-21 08:30 +0200
          Re: [PATCH v9 2/4] power: reset: add reboot mode driver Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-21 11:40 +0200
  Re: [PATCH v9 2/4] power: reset: add reboot mode driver Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-06-20 10:50 +0200

csiph-web