Re: [linux-sunxi] [PATCH] [V2] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board

From	Maxime Ripard <maxime.ripard@free-electrons.com>
Newsgroups	linux.kernel
Subject	Re: [linux-sunxi] [PATCH] [V2] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board
Date	2016-06-15 23:00 +0200
Message-ID	<rKq4O-7mg-11@gated-at.bofh.it> (permalink)
References	(1 earlier) <rFr1w-bC-13@gated-at.bofh.it> <rFw1b-3rP-5@gated-at.bofh.it> <rFwXg-450-19@gated-at.bofh.it> <rIr50-2Pg-15@gated-at.bofh.it> <rJqqd-x5-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

Hi Chen-Yu,

On Mon, Jun 13, 2016 at 11:01:53AM +0800, Chen-Yu Tsai wrote:
> On Fri, Jun 10, 2016 at 5:38 PM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > On Thu, Jun 02, 2016 at 11:15:55AM +0200, Bernhard Nortmann wrote:
> >> Am 02.06.2016 um 10:16 schrieb Maxime Ripard:
> >> >[...]
> >> >Yes, everything that is shared with the banana-pro (which, judging
> >> >from Bernhard, is pretty much everything but a GPIO) should be merged
> >> >in the banapro DT.
> >> >
> >> >Maxime
> >> >
> >>
> >> Don't take my word for granted, as I do not own this hardware or know it
> >> particularly well. There is no doubt that "BPi-M1+" and "Banana Pro" are
> >> very similar, but if in doubt the information form the wiki should be
> >> verified.
> >
> > Hmmmm, ok. Chen-Yu, any input on this? You know the banana-pis much
> > more than I do.
> 
> I did a comparison of the "Banana Pro" vs the "BPi-M1+".
> 
> The differences are similar to what we have with any other development
> board, say the Cubietruck:
> 
>   - A different WiFi chip is used, and the BT part is not hooked up.
>   - Different GPIOs for external power regulator/switches
>   - Different GPIOs for LEDs
>   - Different peripherals exposed on the headers.
> 
> IMO There's no need to merge or have a common .dtsi for the two boards.

Ok.

> They (and all the other development boards) look similar because
> everyone is following the basic set by Allwinner's reference design,
> like which MMC controller and pins are used for SD/MMC, which ones
> are used for SDIO-based WiFi, and so on.
> 
> I did a version completely from scratch using just the schematics:
> 
>   https://github.com/wens/linux/commits/bpi-m1-plus

So, what do you mean by that? Do you have some comments on that patch,
or should I merge it, and you'll post your additions on top of it?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Thread

Re: [linux-sunxi] [PATCH] [V2] ARM: dts: sun7i: Add dts file for  Bananapi M1 Plus board Chen-Yu Tsai <wens@csie.org> - 2016-06-13 05:10 +0200
  Re: [linux-sunxi] [PATCH] [V2] ARM: dts: sun7i: Add dts file for  Bananapi M1 Plus board Maxime Ripard <maxime.ripard@free-electrons.com> - 2016-06-15 23:00 +0200
    Re: [linux-sunxi] [PATCH] [V2] ARM: dts: sun7i: Add dts file for  Bananapi M1 Plus board Chen-Yu Tsai <wens@csie.org> - 2016-06-16 05:10 +0200

csiph-web