Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1415814

Re: [PATCH v4] r8152: Add support for setting pass through MAC address on RTL8153-AD

Show all headers | View raw

Hi! Below are my comments, all about coding style.

On Monday 06 June 2016 12:19:29 Mario Limonciello wrote:
> The RTL8153-AD supports a persistent system specific MAC address.
> This means a device plugged into two different systems with host side
> support will show different (but persistent) MAC addresses.
> 
> This information for the system's persistent MAC address is burned in when
> the system HW is built and available under _SB\AMAC in the DSDT at runtime.

For consistency it would be great to use same ACPI name in whole patch: \_SB.AMAC

> This technology is currently implemented in the Dell TB15 and WD15 Type-C
> docks.  More information is available here:
> http://www.dell.com/support/article/us/en/04/SLN301147
> 
> Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
> ---
> Changes from v3:
>  * Add additional comments about functions and what they're doing
>  * Adjust warning calls to use netif instead
>  * Rename function
> 
>  drivers/net/usb/r8152.c | 70 +++++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 68 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index 3f9f6ed..b2339d3 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -26,6 +26,7 @@
>  #include <linux/mdio.h>
>  #include <linux/usb/cdc.h>
>  #include <linux/suspend.h>
> +#include <linux/acpi.h>
>  
>  /* Information for net-next */
>  #define NETNEXT_VERSION		"08"
> @@ -455,6 +456,11 @@
>  /* SRAM_IMPEDANCE */
>  #define RX_DRIVING_MASK		0x6000
>  
> +/* MAC PASSTHRU */
> +#define AD_MASK			0xfee0
> +#define EFUSE			0xcfdb
> +#define PASS_THRU_MASK		0x1
> +
>  enum rtl_register_content {
>  	_1000bps	= 0x10,
>  	_100bps		= 0x08,
> @@ -1030,6 +1036,59 @@ out1:
>  	return ret;
>  }
>  
> +/* Devices containing RTL8153-AD can support a persistent
> + * host system provided MAC address.
> + * Examples of this are Dell TB15 and Dell WD15 docks
> + */
> +static int get_vendor_mac_passthru_addr(struct r8152 *tp, struct sockaddr *sa)
> +{
> +	acpi_status status;
> +	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> +	union acpi_object *obj;
> +	int ret = -EINVAL;
> +	u32 ocp_data;
> +	unsigned char buf[6];
> +
> +	/* test for -AD variant of RTL8153 */
> +	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
> +	if ((ocp_data & AD_MASK) != 0x1000)
> +		return -ENODEV;
> +
> +	/* test for MAC address pass-through bit */
> +	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
> +	if ((ocp_data & PASS_THRU_MASK) != 1)
> +		return -ENODEV;
> +
> +	/* returns _AUXMAC_#AABBCCDDEEFF# */
> +	status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);

What about?

	if (!ACPI_SUCCESS(status))
		return -ENODEV;

You will save one level of indentation.

> +	obj = (union acpi_object *)buffer.pointer;
> +	if (ACPI_SUCCESS(status)) {
> +		if (obj->type != ACPI_TYPE_BUFFER ||
> +		    obj->string.length != 0x17) {
> +			netif_warn(tp, probe, tp->netdev, "Invalid buffer\n");

I would suggest more specific warning messages. These are very general
and if I would see them in dmesg log I would have no idea what that
means.

> +			goto amacout;
> +		}
> +		if (strncmp(obj->string.pointer, "_AUXMAC_#", 9) != 0) {
> +			netif_warn(tp, probe, tp->netdev, "Invalid header\n");
> +			goto amacout;
> +		}

If your specification state that last character is '#' then I think you
should check it too.

> +		ret = hex2bin(buf, obj->string.pointer + 9, 6);
> +		if (ret < 0 || !is_valid_ether_addr(buf)) {
> +			netif_warn(tp, probe, tp->netdev, "Invalid MAC\n");
> +			goto amacout;
> +		}
> +		memcpy(sa->sa_data, buf, 6);
> +		ether_addr_copy(tp->netdev->dev_addr, sa->sa_data);
> +		netif_info(tp, probe, tp->netdev,
> +			   "Using pass-through MAC addr %pM\n", sa->sa_data);
> +		ret = 0;
> +	}
> +
> +amacout:
> +	kfree(obj);
> +	return ret;
> +}
> +
>  static int set_ethernet_addr(struct r8152 *tp)
>  {
>  	struct net_device *dev = tp->netdev;
> @@ -1038,8 +1097,15 @@ static int set_ethernet_addr(struct r8152 *tp)
>  
>  	if (tp->version == RTL_VER_01)
>  		ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
> -	else
> -		ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
> +	else {
> +		/* if this is not an RTL8153-AD, no eFuse mac pass thru set,
> +		 * or system doesn't provide valid _SB.AMAC this will be
> +		 * be expected to non-zero
> +		 */
> +		ret = get_vendor_mac_passthru_addr(tp, &sa);

You do not "get" (return) any mac address. Personally I would use "read"
word in function name (like above pla_ocp_read). What about?

ret = vendor_mac_passthru_addr_read(tp, sa.sa_data);

Or something similar... "Get" looks like function "get" something, but
instead it set address in &sa structure.

> +		if (ret < 0)
> +			ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
> +	}
>  
>  	if (ret < 0) {
>  		netif_err(tp, probe, dev, "Get ether addr fail\n");

-- 
Pali Rohár
pali.rohar@gmail.com

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH v4] r8152: Add support for setting pass through MAC address on RTL8153-AD Mario Limonciello <mario_limonciello@dell.com> - 2016-06-06 19:30 +0200
  RE: [EXT] [PATCH v4] r8152: Add support for setting pass through MAC  address on RTL8153-AD <Mario_Limonciello@Dell.com> - 2016-06-06 19:50 +0200
  RE: [EXT] [PATCH v4] r8152: Add support for setting pass through MAC  address on RTL8153-AD Konstantin Shkolnyy <Konstantin.Shkolnyy@silabs.com> - 2016-06-06 19:50 +0200
  Re: [PATCH v4] r8152: Add support for setting pass through MAC  address on RTL8153-AD Pali Rohár <pali.rohar@gmail.com> - 2016-06-07 10:00 +0200
  RE: [PATCH v4] r8152: Add support for setting pass through MAC address on RTL8153-AD Hayes Wang <hayeswang@realtek.com> - 2016-06-07 16:00 +0200

csiph-web