Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64

From	Pavel Machek <pavel@ucw.cz>
Newsgroups	linux.kernel
Subject	Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64
Date	2016-06-04 09:20 +0200
Message-ID	<rGe2d-5Mb-1@gated-at.bofh.it> (permalink)
References	<rC5Ae-2Hk-3@gated-at.bofh.it> <rC5Ae-2Hk-9@gated-at.bofh.it> <rG4md-83b-7@gated-at.bofh.it> <rG4Fz-8oJ-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Fri 2016-06-03 17:12:44, William Breathitt Gray wrote:
> On Fri, Jun 03, 2016 at 10:57:03PM +0200, Pavel Machek wrote:
> >Hi!
> >
> >> With the introduction of the ISA_BUS_API Kconfig option, ISA-style
> >> drivers may be built for X86_64 architectures. This patch changes the
> >> ISA Kconfig option dependency of the PC/104 drivers to ISA_BUS_API, thus
> >> allowing them to build for X86_64 as they are expected to.
> >> 
> >> Cc: Guenter Roeck <linux@roeck-us.net>
> >> Cc: Linus Walleij <linus.walleij@linaro.org>
> >> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> >> ---
> >>  drivers/gpio/Kconfig | 8 ++++----
> >>  1 file changed, 4 insertions(+), 4 deletions(-)
> >> 
> >> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> >> index 48da857..dc6da77 100644
> >> --- a/drivers/gpio/Kconfig
> >> +++ b/drivers/gpio/Kconfig
> >> @@ -530,7 +530,7 @@ menu "Port-mapped I/O GPIO drivers"
> >>  
> >>  config GPIO_104_DIO_48E
> >>  	tristate "ACCES 104-DIO-48E GPIO support"
> >> -	depends on ISA
> >> +	depends on ISA_BUS_API
> >>  	select GPIOLIB_IRQCHIP
> >>  	help
> >>  	  Enables GPIO support for the ACCES 104-DIO-48E series
> >
> >Should we do "depends on PC104" here, because that is what it really
> >means, and have PC104 enabled when ISA_BUS_API is enabled or something
> >like that?
> 
> Since the functionality remains the same, I'm a bit indifferent to that
> change; as long as the driver builds for systems in which it's intended
> to be used, I'm satisfied.
> 
> Differentiating between PC/104 and ISA may be a pointless endeavor
> though since both buses appear the same to software. But if it is better
> to differentiate between devices as such, then I see little harm in
> adding a PC104 Kconfig option which follows the ISA_BUS_API Kconfig
> option.

Well, they are same to the software, but not at the hardware. If I
have a development board that has PC104 (but not isa), I'd like to see
prompts for PC104 extensions, not for isa. If PC105 comes out, still
ISA compatible, I will want to see prompts for PC104 boards or PC105
boards, but not neccessarily both...

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Thread

Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64 Pavel Machek <pavel@ucw.cz> - 2016-06-03 23:00 +0200
  Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64 William Breathitt Gray <vilhelm.gray@gmail.com> - 2016-06-03 23:20 +0200
    Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64 Pavel Machek <pavel@ucw.cz> - 2016-06-04 09:20 +0200
      Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64 William Breathitt Gray <vilhelm.gray@gmail.com> - 2016-06-04 13:20 +0200
        Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64 Pavel Machek <pavel@ucw.cz> - 2016-06-05 21:30 +0200
          Re: [PATCH v2 2/4] gpio: Allow PC/104 devices on X86_64 William Breathitt Gray <vilhelm.gray@gmail.com> - 2016-06-05 22:10 +0200

csiph-web