Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1412880

Re: [PATCH v2 3/5] ARM: dts: Add I2C1 support for STM32F429 SoC

From "M'boumba Cedric Madianga" <cedric.madianga@gmail.com>
Newsgroups linux.kernel
Subject Re: [PATCH v2 3/5] ARM: dts: Add I2C1 support for STM32F429 SoC
Date 2016-06-03 10:00 +0200
Message-ID <rFSbo-od-21@gated-at.bofh.it> (permalink)
References <rFBNf-71V-7@gated-at.bofh.it> <rFBNg-71V-31@gated-at.bofh.it> <rFDvI-87Q-5@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


2016-06-02 18:07 GMT+02:00 Maxime Coquelin <mcoquelin.stm32@gmail.com>:
> 2016-06-02 16:26 GMT+02:00 M'boumba Cedric Madianga <cedric.madianga@gmail.com>:
>> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
>> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
>> ---
>>  arch/arm/boot/dts/stm32f429.dtsi | 24 ++++++++++++++++++++++++
>>  1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
>> index 434d4b9..d5857eb 100644
>> --- a/arch/arm/boot/dts/stm32f429.dtsi
>> +++ b/arch/arm/boot/dts/stm32f429.dtsi
>> @@ -323,6 +323,18 @@
>>                                         slew-rate = <2>;
>>                                 };
>>                         };
>> +
>> +                       i2c1_sda_pin: i2c1_sda@0 {
>> +                               pins {
>> +                                       pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>;
>> +                                       drive-open-drain;
>> +                               };
>> +                       };
>> +                       i2c1_scl_pin: i2c1_scl@0 {
>> +                               pins {
>> +                                       pinmux = <STM32F429_PB6_FUNC_I2C1_SCL>;
>> +                               };
>> +                       };
>>                 };
> Shouldn't be preferrable to group the two functions in a single one,
I agree. It is better.
>
>             usart1_pins_a: usart1@0 {
>                 pins1 {
>                     pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
>                     bias-disable;
>                     drive-push-pull;
>                     slew-rate = <0>;
>                 };
>                 pins2 {
>                     pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
>                     bias-disable;
>                 };
>             };
>
> Also, I would prefer the phandle to be suffixed with the port number,
> as multiple muxing options are available, for example "i2c1_pins_b".
Ok understood. I will fix that in the V3.
Thanks
>
> Thanks,
> Maxime

Back to linux.kernel | Previous | NextPrevious in thread | Next in thread | Find similar | Unroll thread


Thread

[PATCH v2 0/5] Add support for the STM32F4 I2C M'boumba Cedric Madianga <cedric.madianga@gmail.com> - 2016-06-02 16:30 +0200
  [PATCH v2 3/5] ARM: dts: Add I2C1 support for STM32F429 SoC M'boumba Cedric Madianga <cedric.madianga@gmail.com> - 2016-06-02 16:30 +0200
    Re: [PATCH v2 3/5] ARM: dts: Add I2C1 support for STM32F429 SoC Maxime Coquelin <mcoquelin.stm32@gmail.com> - 2016-06-02 18:20 +0200
      Re: [PATCH v2 3/5] ARM: dts: Add I2C1 support for STM32F429 SoC "M'boumba Cedric Madianga" <cedric.madianga@gmail.com> - 2016-06-03 10:00 +0200
  [PATCH v2 5/5] ARM: configs: Add I2C support for STM32 defconfig M'boumba Cedric Madianga <cedric.madianga@gmail.com> - 2016-06-02 16:30 +0200

csiph-web